This interesting book aims to contrast the existing and developing generating systems typically in the range 1kW to 2MW for use in hospitals, supermarkets, leisure centres, government and commercial building and domestic housing generally and for direct connection to the grid.COMPLETE CONTENTS Renewable energy in the UK - an issue of scale Wind turbines - a reviewof smaller units Run of river hydro for the UK and overseas Small hydro for remote areas - an international view Micro CHP - energy services and smart metering Micro combined heat and power Stirling engine based microenergy systems Running microturbines on biogas Community biomass gasification CHP Really small micro-scale generation (PV) The 'RICT' engine in micro energy and CHP systems Pressurized hybrid fuel cell system Reinventing electricity distribution Micro Energy Systems will be useful to project developers, power generators, local government and building services engineers in the industrial and commercial sector in the UK and throughout the world.
The introduction of micro CHP – the simultaneous production of heat and power in a single building based on small energy conversion units such as Stirling and reciprocating engines or fuel cells – is of increasing political and public interest. This book introduces into micro CHP systems and technologies, and presents the results of the first such investigation carried out by four German research bodies.
With its inclusion of the fundamentals, systems and applications, this reference provides readers with the basics of micro energy conversion along with expert knowledge on system electronics and real-life microdevices. The authors address different aspects of energy harvesting at the micro scale with a focus on miniaturized and microfabricated devices. Along the way they provide an overview of the field by compiling knowledge on the design, materials development, device realization and aspects of system integration, covering emerging technologies, as well as applications in power management, energy storage, medicine and low-power system electronics. In addition, they survey the energy harvesting principles based on chemical, thermal, mechanical, as well as hybrid and nanotechnology approaches. In unparalleled detail this volume presents the complete picture -- and a peek into the future -- of micro-powered microsystems.
Microgrids: Advanced Control Methods and Renewable Energy System Integration demonstrates the state-of-art of methods and applications of microgrid control, with eleven concise and comprehensive chapters. The first three chapters provide an overview of the control methods of microgrid systems that is followed by a review of distributed control and management strategies for the next generation microgrids. Next, the book identifies future research directions and discusses the hierarchical power sharing control in DC Microgrids. Chapter 4 investigates the demand side management in microgrid control systems from various perspectives, followed by an outline of the operation and controls of the smart microgrids in Chapter 5. Chapter 6 deals with control of low-voltage microgrids with master/slave architecture. The final chapters explain the load-Frequency Controllers for Distributed Power System Generation Units and the issue of robust control design for VSIs, followed by a communication solution denoted as power talk. Finally, in Chapter 11, real-time implementation of distributed control for an autonomous microgrid system is performed. - Addresses issues of contemporary interest to practitioners in the power engineering and management fields - Focuses on the role of microgrids within the overall power system structure and attempts to clarify the main findings relating to primary and secondary control and management at the microgrid level - Provides results from a quantified assessment of benefits from economic, environmental, operational, and social point-of-views - Presents the hierarchical control levels manifested in microgrid operations and evaluates the principles and main functions of centralized and decentralized control
Wind power is fast becoming one of the leading renewable energy sources worldwide, not only from large scale wind farms but also from the increasing penetration of stand-alone and hybrid wind energy systems. These systems are primarily of benefit in small-scale applications, especially where there is no connection to a central electricity network, and where there are limited conventional fuel resources but available renewable energy resources. By applying appropriate planning, systems selection and sizing, including the integration of energy storage devices to mitigate variable energy generation patterns, theses systems can supply secure reliable and economic power to remote locations and distributed micro-grids.Stand-alone and hybrid wind energy systems is a synthesis of the most recent knowledge and experience on wind-based hybrid renewable energy systems, comprehensively covering the scientific, technical and socio-economic issues involved in the application of these systems.Part one presents an overview of the fundamental science and engineering of stand-alone and hybrid wind energy systems and energy storage technology, including design and performance optimisation methods and feasibility assessment for these systems. Part two initially reviews the design, development, operation and optimisation of stand-alone and hybrid wind energy systems – including wind-diesel, wind -photovoltaic (PV), wind-hydrogen, and wind-hydropower energy systems – before moving on to examine applicable energy storage technology, including electro-chemical, flywheel (kinetic) and compressed air energy storage technologies. Finally, Part three assesses the integration of stand-alone and hybrid wind energy systems and energy technology into remote micro-grids and buildings, and their application for desalination systems.With its distinguished editor and international team of contributors, Stand-alone and hybrid wind energy systems is a standard reference for all renewable energy professionals, consultants, researchers and academics from post-graduate level up. - Provides an overview of the fundamental science and engineering of stand-alone hybrid and wind energy systems, including design and performance optimisation methods - Reviews the development and operation of stand-alone and hybrid wind energy systems - Assesses the integration of stand-alone and hybrid wind energy systems and energy storage technology into remote micro-grids and buildings, and their application for desalination systems
Small and micro combined heat and power (CHP) systems are a form of cogeneration technology suitable for domestic and community buildings, commercial establishments and industrial facilities, as well as local heat networks. One of the benefits of using cogeneration plant is a vastly improved energy efficiency: in some cases achieving up to 80–90% systems efficiency, whereas small-scale electricity production is typically at well below 40% efficiency, using the same amount of fuel. This higher efficiency affords users greater energy security and increased long-term sustainability of energy resources, while lower overall emissions levels also contribute to an improved environmental performance.Small and micro combined heat and power (CHP) systems provides a systematic and comprehensive review of the technological and practical developments of small and micro CHP systems.Part one opens with reviews of small and micro CHP systems and their techno-economic and performance assessment, as well as their integration into distributed energy systems and their increasing utilisation of biomass fuels. Part two focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines, gas turbines and microturbines, Stirling engines, organic Rankine cycle process and fuel cell systems. Heat-activated cooling (i.e. trigeneration) technologies and energy storage systems, of importance to the regional/seasonal viability of this technology round out this section. Finally, part three covers the range of applications of small and micro CHP systems, from residential buildings and district heating, to commercial buildings and industrial applications, as well as reviewing the market deployment of this important technology.With its distinguished editor and international team of expert contributors, Small and micro combined heat and power (CHP) systems is an essential reference work for anyone involved or interested in the design, development, installation and optimisation of small and micro CHP systems. - Reviews small- and micro-CHP systems and their techno-economic and performance assessment - Explores integration into distributed energy systems and their increasing utilisation of biomass fuels - Focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines
This book addresses important topical questions of microgrids and local energy systems. It begins with an investigation of the electrical protection of microgrids followed by a study of the power converters used and the utilization of multi-objective optimization for the selection of component ratings. Subsequent chapters address peer-to-peer energy trading in microgrids, local district heating and cooling systems, neighborhood generators used to supplement the utility electricity supplies in Iraq, and regulatory impediments to micro-wind generation in the United States.
A reliable and sustainable energy supply is a prerequisite for any stable and prosperous society, and the volatility of international supply chains, coupled with the increasing threat of a global climate crisis, mean that developing and maintaining efficient and dependable energy systems for the future is more important than ever. This book presents selected papers from NEFES 2023, the 8th International Conference on New Energy and Future Energy Systems, held from 21 to 24 November 2023 in Matsue, Japan. The conference encompasses a number of different areas, including power system operation, biomass energy, fuel energy, solar energy, thermal energy, energy materials, energy technology, and other related fields. From a total of 84 submissions received, 12 peer-reviewed papers were selected for publication in this book. Ranging widely, from renewable energy policy planning for a low-carbon economy and the impact of lightning-induced wildfires on power systems to the energy supply capacity of micro energy grids and safety design technologies for a sodium-cooled fast reactor, the papers included here offer a fascinating insight into the challenges and solutions encountered in modern energy systems. Covering a wide range of topics related to energy and energy systems, the book will be of interest to all researchers, engineers, and educators working in the field.
- This derivative volume stemming from content included in our seminal Power Electronics Handbook takes its chapters related to renewables and establishes them at the core of a new volume dedicated to the increasingly pivotal and as yet under-published intersection of Power Electronics and Alternative Energy. While this re-versioning provides a corollary revenue stream to better leverage our core handbook asset, it does more than simply re-package existing content. Each chapter will be significantly updated and expanded by more than 50%, and all new introductory and summary chapters will be added to contextualize and tie the volume together. Therefore, unlike traditional derivative volumes, we will be able to offer new and updated material to the market and include this largely original content in our ScienceDirect Energy collection. - Due to the inherently multi-disciplinary nature of renewables, many engineers come from backgrounds in Physics, Materials, or Chemical Engineering, and therefore do not have experience working in-depth with electronics. As more and more alternative and distributed energy systems require grid hook-ups and on-site storage, a working knowledge of batteries, inverters and other power electronics components becomes requisite. Further, as renewables enjoy broadening commercial implementation, power electronics professionals are interested to learn of the challenges and strategies particular to applications in alternative energy. This book will bring each group up-to-speed with the primary issues of importance at this technological node. - This content clarifies the juncture of two key coverage areas for our Energy portfolio: alternative sources and power systems. It serves to bridge the information in our power engineering and renewable energy lists, supporting the growing grid cluster in the former and adding key information on practical implementation to the latter. - Provides a thorough overview of the key technologies, methods and challenges for implementing power electronics in alternative energy systems for optimal power generation - Includes hard-to-find information on how to apply converters, inverters, batteries, controllers and more for stand-alone and grid-connected systems - Covers wind and solar applications, as well as ocean and geothermal energy, hybrid systems and fuel cells
