Gas Flow and Chemical Lasers
Gas Flow and Chemical Lasers

Author: Salman Rosenwaks

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 588

ISBN-13: 3642718590

DOWNLOAD EBOOK

The Sixth International Symposium on Gas Flow and Chemical Lasers (GCL) was held in Jerusalem, Israel, on September 8-12, 1986. The charm and beauty of Jerusalem and the unique blending of ancient and modern made this Symposium an enjoyable experience for the 165 participants and the accompanying persons. Yet, it seems that the invited and contributed papers presented at the Symposium were equally attractive so that most of the participants attended most sessions, resisting the temptations outside the session hall. Indeed, many speakers presented up-to-date results that were obtained, or cleared, just a few days before the Symposium. This volume is a compi lation of 19 invited and 61 contributed papers and of a panel discussion on the prospects for short wavelength chemical lasers held at the closing session of the Symposium. This discussion is presented as recorded in order to re tain the flavour of spontaneous presentation at the risk - or advantage - of presenting some venturous ideas, and the danger of misquoting. In editing the book, a deductive approach has been attempted. The book starts with some fundamental issues, namely fluid dynamics and optics, and then deals with the design, diagnostics, propagation and applications of various gas laser systems, covering the wavelength spectrum from XUV to infrared. Then follow recent developments of general interest to the laser community and the book concludes with an eye to the future, i.e., with a section on short wavelength chemical lasers.

Gas Flow and Chemical Lasers
Gas Flow and Chemical Lasers

Author: Michele Onorato

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 750

ISBN-13: 1461570670

DOWNLOAD EBOOK

This volume contains eight invited papers and seventy-three contributed papers presented at the Fourth International Symposium on Gas Flow and Chemical Lasers. which was held in Stresa. Italy. from September 13 to 17. 1984. The purpose of the Symposium was to record and discuss current research developments and applications related to high power lasers. Papers were solicited from the entire spectrum of activities, includ ing basic physics, aerothermodynamics, new laser media, laser design, diagnostic techniques, laser propagation. interaction phenom ena, applications. The Symposium was an opportunity for scientists and engineers representing all these disciplines to come together to report their recent work, to exchange ideas and to provide an up-to-date account of international progress in these fields. The contributed papers were reviewed by the members of the Scientific Advisory CoEmittee. who also took responsibility for formulating the program of invited lectures. As editor I wish to express my appreciation and my gratitude to people and organizations that made this Symposium a success: the Members of the Scientific Advisory Committee, the Members of the Local Organizing Committee, the Sponsors and the Symposium Secretary. A grateful acknowledgement is expressed to Dr. M. Sandra Oggiano for assistance in the organization of the Symposium and publication of these proceedings.

Gas Lasers
Gas Lasers

Author: Masamori Endo

Publisher: CRC Press

Published: 2018-10-03

Total Pages: 607

ISBN-13: 1351837192

DOWNLOAD EBOOK

Lasers with a gaseous active medium offer high flexibility, wide tunability, and advantages in cost, beam quality, and power scalability. Gas lasers have tended to become overshadowed by the recent popularity and proliferation of semiconductor lasers. As a result of this shift in focus, details on modern developments in gas lasers are difficult to find. In addition, different types of gas lasers have unique properties that are not well-described in other references. Collecting expert contributions from authorities dealing with specific types of lasers, Gas Lasers examines the fundamentals, current research, and applications of this important class of laser. It is important to understand all types of lasers, from solid-state to gaseous, before making a decision for any application. This book fills in the gaps by discussing the definition and properties of gaseous media along with its fluid dynamics, electric excitation circuits, and optical resonators. From this foundation, the discussion launches into the basic physics, characteristics, applications, and current research efforts for specific types of gas lasers: CO lasers, CO2 lasers, HF/DF lasers, excimer lasers, iodine lasers, and metal vapor lasers. The final chapter discusses miscellaneous lasers not covered in the previous chapters. Collecting hard-to-find material into a single, convenient source, Gas Lasers offers an encyclopedic survey that helps you approach new applications with a more complete inventory of laser options.

Energy Meetings
Energy Meetings

Author: United States. Department of Energy. Technical Information Center

Publisher:

Published: 1986

Total Pages: 702

ISBN-13:

DOWNLOAD EBOOK

A listing of forthcoming meetings, conventions, etc.

High Power Lasers In Production Engineering
High Power Lasers In Production Engineering

Author: Dieter Schuocker

Publisher: World Scientific Publishing Company

Published: 1999-03-03

Total Pages: 464

ISBN-13: 9813105054

DOWNLOAD EBOOK

High power lasers of either the gas or solid state type can be used to generate a focal spot with a diameter of about a tenth of a millimetre and a power density of up to 100 Mio W/cm2. With these intensities all materials can be heated up rapidly, leading to fast melting, violent evaporation or even plasma formation. So laser beams can be utilized for various processing tasks, such as transformation hardening, cutting and ablation or welding and cladding or even rapid prototyping. With these processes, important advantages are achieved compared to conventional tools such as high processing speed due to the high concentration of energy and high quality of the processed workpiece without deformations due to the small overall heat input to the workpiece that corresponds to the small spot diameter. All these advantages finally result in strongly reduced production costs, which is the main reason for a world-wide substitution of conventional processes and other beam tools by laser technology.This monograph offers a great insight into the operation principles of high power laser sources, the phenomena of interaction of laser beams and materials and the mechanisms of the various production processes with lasers — thus enabling production engineers and others to make optimum use of the benefits of laser technology and to understand the technical properties and the physical limitations of this most recent technology (especially in comparison to conventional tools and other beam tools), and providing a sufficient basis for the understanding and use of future developments in this area.

High Power Lasers in Production Engineering
High Power Lasers in Production Engineering

Author: Dieter Schu”cker

Publisher: World Scientific

Published: 1999

Total Pages: 466

ISBN-13: 9789810230395

DOWNLOAD EBOOK

High power lasers of either the gas or solid state type can be used to generate a focal spot with a diameter of about a tenth of a millimetre and a power density of up to 100 Mio W/cm2. With these intensities all materials can be heated up rapidly, leading to fast melting, violent evaporation or even plasma formation. So laser beams can be utilized for various processing tasks, such as transformation hardening, cutting and ablation or welding and cladding or even rapid prototyping. With these processes, important advantages are achieved compared to conventional tools such as high processing speed due to the high concentration of energy and high quality of the processed workpiece without deformations due to the small overall heat input to the workpiece that corresponds to the small spot diameter. All these advantages finally result in strongly reduced production costs, which is the main reason for a world-wide substitution of conventional processes and other beam tools by laser technology.This monograph offers a great insight into the operation principles of high power laser sources, the phenomena of interaction of laser beams and materials and the mechanisms of the various production processes with lasers ? thus enabling production engineers and others to make optimum use of the benefits of laser technology and to understand the technical properties and the physical limitations of this most recent technology (especially in comparison to conventional tools and other beam tools), and providing a sufficient basis for the understanding and use of future developments in this area.