"This interim guide to quantitative risk assessment for UK reservoirs provides a tool for the management of reservoir safety by experienced dam professionals. It comprises a screening level assessment of the risk of failure of a dam, i.e. the uncontrolled sudden large release of water from the reservoir it retains." "The guide is in the form of a Microsoft Excel workbook with proforma calculations, and accompanying text. It is intended to form part of either a periodic safety review or a portfolio risk assessment, where application of this guide identifies potential concerns a more detailed assessment is likely to be appropriate."--Résumé de l'éditeur.
Hydrological and hydraulic issues covered include: - a study into the effect of changes in weir crest coefficient with head - computer modelling of the operational systems of reservoirs - developments in dam break modelling Various projects and case studies from Portugal, India, Kazakhstan, Georgia and Egypt are included. Grouting works at two reservoirs are described and there is a paper on the desiccation assessment of the puddle clay cores at several reservoirs. The book also describes and illustrates other works on the refurbishment and rehabilitation of dams.
This book provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The book provides dam engineers and geologists with a practical approach, and gives university students an insight into the subject of dam engineering. All phases of investigation, design and construction are covered, through to the preliminary and detailed design phases and ultimately the construction phase. This revised and expanded 2nd edition includes a lengthy new chapter on the assessment of the likelihood of failure of dams by internal erosion and piping.
Internal erosion and piping in embankments and their foundations is the main cause of failures and accidents to embankment dams. For new dams, the potential for internal erosion and piping can be controlled by good design and construction of the core of the dam and provision of filters to intercept seepage through the embankment and the foundations
The International Committee on Large Dams (ICOLD) held its 26th International Congress in Vienna, Austria (1-7 July 2018). The proceedings of the congress focus on four main questions: 1. Reservoir sedimentation and sustainable development; 2. Safety and risk analysis; 3. Geology and dams, and 4. Small dams and levees. The book thoroughly discusses these questions and is indispensable for academics, engineers and professionals involved or interested in engineering, hydraulic engineering and related disciplines.
Sustainable Water Treatment: Engineering Solutions for a Variable Climate covers sustainable water and environmental engineering aspects relevant for the drainage and treatment of storm water and wastewater. The book explains the fundamental science and engineering principles for the student and professional market. Standard and novel design recommendations for sustainable technologies, such as constructed wetlands, sustainable drainage systems and sustainable flood retention basins are provided to account for the interests of professional engineers and environmental scientists. The book presents the latest research findings in wastewater treatment and runoff control that are ideal for academics and senior consultants. The book offers a challenging, diverse, holistic, multidisciplinary, experimental and modelling-orientated case study, covering topics such as natural wetlands, constructed treatment wetlands for pollution control, sustainable drainage systems managing diffuse pollution, specific applications, such as wetlands treating dye wastewater and ecological sanitation systems recycling treated waters for the irrigation of crops. - Explains the fundamental science and engineering principles behind each topic - Provides an easy-to-understand, descriptive overview of complex 'black box' drainage and treatment systems and general design issues involved - Includes a comprehensive analysis of asset performance, modelling of treatment processes, and an assessment of sustainability and economics
Presents proceedings the 13th Conference of the British Dam Society held at the University of Kent, June 2004. These papers include discussion on the benefits that reservoirs can provide in terms of water supply and recreation, the environmental impact they can have, and the use of geomembranes to provide water tightness.
Now includes Worked Examples for lectutrers in a companion pdf! The fourth edition of this volume presents design principles and practical guidance for key hydraulic structures. Fully revised and updated, this new edition contains enhanced texts and sections on: environmental issues and the World Commission on Dams partially saturated soils, small amenity dams, tailing dams, upstream dam face protection and the rehabilitation of embankment dams RCC dams and the upgrading of masonry and concrete dams flow over stepped spillways and scour in plunge pools cavitation, aeration and vibration of gates risk analysis and contingency planning in dam safety small hydroelectric power development and tidal and wave power wave statistics, pipeline stability, wave–structure interaction and coastal modelling computational models in hydraulic engineering. The book's key topics are explored in two parts - dam engineering and other hydraulic structures – and the text concludes with a chapter on models in hydraulic engineering. Worked numerical examples supplement the main text and extensive lists of references conclude each chapter. Hydraulic Structures provides advanced students with a solid foundation in the subject and is a useful reference source for researchers, designers and other professionals.
Now in its fifth edition, Hydraulics in Civil and Environmental Engineering combines thorough coverage of the basic principles of civil engineering hydraulics with wide-ranging treatment of practical, real-world applications. This classic text is carefully structured into two parts to address principles before moving on to more advanced topics. The first part focuses on fundamentals, including hydrostatics, hydrodynamics, pipe and open channel flow, wave theory, physical modeling, hydrology, and sediment transport. The second part illustrates the engineering applications of these fundamental principles to pipeline system design; hydraulic structures; and river, canal, and coastal engineering—including up-to-date environmental implications. A chapter on computational hydraulics demonstrates the application of computational simulation techniques to modern design in a variety of contexts. What’s New in This Edition Substantive revisions of the chapters on hydraulic machines, flood hydrology, and computational modeling New material added to the chapters on hydrostatics, principles of fluid flow, behavior of real fluids, open channel flow, pressure surge in pipelines, wave theory, sediment transport, river engineering, and coastal engineering The latest recommendations on climate change predictions, impacts, and adaptation measures Updated references Hydraulics in Civil and Environmental Engineering, Fifth Edition is an essential resource for students and practitioners of civil, environmental, and public health engineering and associated disciplines. It is comprehensive, fully illustrated, and contains many worked examples. Spreadsheets and useful links to other web pages are available on an accompanying website, and a solutions manual is available to lecturers.
