Assessment of Inertial Confinement Fusion Targets

Assessment of Inertial Confinement Fusion Targets

Author: National Research Council

Publisher: National Academies Press

Published: 2013-07-17

Total Pages: 119

ISBN-13: 0309270626

DOWNLOAD EBOOK

In the fall of 2010, the Office of the U.S. Department of Energy's (DOE's) Secretary for Science asked for a National Research Council (NRC) committee to investigate the prospects for generating power using inertial confinement fusion (ICF) concepts, acknowledging that a key test of viability for this concept-ignition -could be demonstrated at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) in the relatively near term. The committee was asked to provide an unclassified report. However, DOE indicated that to fully assess this topic, the committee's deliberations would have to be informed by the results of some classified experiments and information, particularly in the area of ICF targets and nonproliferation. Thus, the Panel on the Assessment of Inertial Confinement Fusion Targets ("the panel") was assembled, composed of experts able to access the needed information. The panel was charged with advising the Committee on the Prospects for Inertial Confinement Fusion Energy Systems on these issues, both by internal discussion and by this unclassified report. A Panel on Fusion Target Physics ("the panel") will serve as a technical resource to the Committee on Inertial Confinement Energy Systems ("the Committee") and will prepare a report that describes the R&D challenges to providing suitable targets, on the basis of parameters established and provided to the Panel by the Committee. The Panel on Fusion Target Physics will prepare a report that will assess the current performance of fusion targets associated with various ICF concepts in order to understand: 1. The spectrum output; 2. The illumination geometry; 3. The high-gain geometry; and 4. The robustness of the target design. The panel addressed the potential impacts of the use and development of current concepts for Inertial Fusion Energy on the proliferation of nuclear weapons information and technology, as appropriate. The Panel examined technology options, but does not provide recommendations specific to any currently operating or proposed ICF facility.


The Release of Thermonuclear Energy by Inertial Confinement

The Release of Thermonuclear Energy by Inertial Confinement

Author: Friedwardt Winterberg

Publisher: World Scientific

Published: 2010

Total Pages: 437

ISBN-13: 9814295906

DOWNLOAD EBOOK

This is a comprehensive book which describes the three essential parts of what is known as "Inertial Confinement Fusion": the way thermonuclear burn takes place in non-magnetized, magnetized and fusion-fission hybrid assemblies; the pulse power ignition technology (nuclear, electrical, optical and chemical); and the applications of inertial confinement fusion technology for peaceful nuclear energy on Earth and in space. An integrated single text of such extensive technical width is a rare find, and younger generations of nuclear engineers any physicists will appreciate this book as a companion to their traditional textbooks.


Inertial Confinement Fusion Driven Thermonuclear Energy

Inertial Confinement Fusion Driven Thermonuclear Energy

Author: Bahman Zohuri

Publisher: Springer

Published: 2017-01-26

Total Pages: 324

ISBN-13: 3319509071

DOWNLOAD EBOOK

This book takes a holistic approach to plasma physics and controlled fusion via Inertial Confinement Fusion (ICF) techniques, establishing a new standard for clean nuclear power generation. Inertial Confinement Fusion techniques to enable laser-driven fusion have long been confined to the black-box of government classification due to related research on thermonuclear weapons applications. This book is therefore the first of its kind to explain the physics, mathematics and methods behind the implosion of the Nd-Glass tiny balloon (pellet), using reliable and thoroughly referenced data sources. The associated computer code and numerical analysis are included in the book. No prior knowledge of Laser Driven Fusion and no more than basic background in plasma physics is required.


An Assessment of the Prospects for Inertial Fusion Energy

An Assessment of the Prospects for Inertial Fusion Energy

Author: National Research Council

Publisher: National Academies Press

Published: 2013-07-05

Total Pages: 247

ISBN-13: 0309272246

DOWNLOAD EBOOK

The potential for using fusion energy to produce commercial electric power was first explored in the 1950s. Harnessing fusion energy offers the prospect of a nearly carbon-free energy source with a virtually unlimited supply of fuel. Unlike nuclear fission plants, appropriately designed fusion power plants would not produce the large amounts of high-level nuclear waste that requires long-term disposal. Due to these prospects, many nations have initiated research and development (R&D) programs aimed at developing fusion as an energy source. Two R&D approaches are being explored: magnetic fusion energy (MFE) and inertial fusion energy (IFE). An Assessment of the Prospects for Inertial Fusion Energy describes and assesses the current status of IFE research in the United States; compares the various technical approaches to IFE; and identifies the scientific and engineering challenges associated with developing inertial confinement fusion (ICF) in particular as an energy source. It also provides guidance on an R&D roadmap at the conceptual level for a national program focusing on the design and construction of an inertial fusion energy demonstration plant.


An Introduction to Inertial Confinement Fusion

An Introduction to Inertial Confinement Fusion

Author: Susanne Pfalzner

Publisher: CRC Press

Published: 2006-03-02

Total Pages: 244

ISBN-13: 1420011847

DOWNLOAD EBOOK

Newcomers to the field of inertial confinement fusion (ICF) often have difficulty establishing a clear picture of the overall field. The reason for this is because, while there are many books devoted to special topics within the field, there is none that provides an overview of the field as a whole. An Introduction to Inertial Confinement Fusion fi


Controlled Thermonuclear Fusion

Controlled Thermonuclear Fusion

Author: Jean Louis Bobin

Publisher: World Scientific Publishing Company

Published: 2014-03-12

Total Pages: 214

ISBN-13: 9814579777

DOWNLOAD EBOOK

The book is a presentation of the basic principles and main achievements in the field of nuclear fusion. It encompasses both magnetic and inertial confinements plus a few exotic mechanisms for nuclear fusion. The state-of-the-art regarding thermonuclear reactions, hot plasmas, tokamaks, laser-driven compression and future reactors is given.


Nuclear Fusion by Inertial Confinement

Nuclear Fusion by Inertial Confinement

Author: Guillermo Velarde

Publisher: CRC Press

Published: 1992-12-15

Total Pages: 784

ISBN-13: 9780849369261

DOWNLOAD EBOOK

Nuclear Fusion by Inertial Confinement provides a comprehensive analysis of directly driven inertial confinement fusion. All important aspects of the process are covered, including scientific considerations that support the concept, lasers and particle beams as drivers, target fabrication, analytical and numerical calculations, and materials and engineering considerations. Authors from Australia, Germany, Italy, Japan, Russia, Spain, and the U.S. have contributed to the volume, making it an internationally significant work for all scientists working in the Inertial Confinement Fusion (ICF) field, as well as for graduate students in engineering and physics with interest in ICF.


The Physics of Inertial Fusion

The Physics of Inertial Fusion

Author: Stefano Atzeni

Publisher: OUP Oxford

Published: 2004-06-03

Total Pages: 488

ISBN-13: 9780191524059

DOWNLOAD EBOOK

This book is on inertial confinement fusion, an alternative way to produce electrical power from hydrogen fuel by using powerful lasers or particle beams. It involves the compression of tiny amounts (micrograms) of fuel to thousand times solid density and pressures otherwise existing only in the centre of stars. Thanks to advances in laser technology, it is now possible to produce such extreme states of matter in the laboratory. Recent developments have boosted laser intensities again with new possibilities for laser particle accelerators, laser nuclear physics, and fast ignition of fusion targets. This is a reference book for those working on beam plasma physics, be it in the context of fundamental research or applications to fusion energy or novel ultra-bright laser sources. The book combines quite different areas of physics: beam target interaction, dense plasmas, hydrodynamic implosion and instabilities, radiative energy transfer as well as fusion reactions. Particular attention is given to simple and useful modelling, including dimensional analysis and similarity solutions. Both authors have worked in this field for more than 20 years. They want to address in particular those teaching this topic to students and all those interested in understanding the technical basis.


Fusion

Fusion

Author: Garry McCracken

Publisher: Academic Press

Published: 2013

Total Pages: 249

ISBN-13: 0123846560

DOWNLOAD EBOOK

"Offers scientists and researchers the scientific basics, up-to-date current research, technical developments, and practical applications needed in fusion energy research/"--pub. desc.


Principles Of Fusion Energy: An Introduction To Fusion Energy For Students Of Science And Engineering

Principles Of Fusion Energy: An Introduction To Fusion Energy For Students Of Science And Engineering

Author: Archie A Harms

Publisher: World Scientific Publishing Company

Published: 2000-06-15

Total Pages: 309

ISBN-13: 981310273X

DOWNLOAD EBOOK

This textbook accommodates the two divergent developmental paths which have become solidly established in the field of fusion energy: the process of sequential tokamak development toward a prototype and the need for a more fundamental and integrative research approach before costly design choices are made.Emphasis is placed on the development of physically coherent and mathematically clear characterizations of the scientific and technological foundations of fusion energy which are specifically suitable for a first course on the subject. Of interest, therefore, are selected aspects of nuclear physics, electromagnetics, plasma physics, reaction dynamics, materials science, and engineering systems, all brought together to form an integrated perspective on nuclear fusion and its practical utilization.The book identifies several distinct themes. The first is concerned with preliminary and introductory topics which relate to the basic and relevant physical processes associated with nuclear fusion. Then, the authors undertake an analysis of magnetically confined, inertially confined, and low-temperature fusion energy concepts. Subsequently, they introduce the important blanket domains surrounding the fusion core and discuss synergetic fusion-fission systems. Finally, they consider selected conceptual and technological subjects germane to the continuing development of fusion energy systems.