High Voltage Devices and Circuits in Standard CMOS Technologies

High Voltage Devices and Circuits in Standard CMOS Technologies

Author: Hussein Ballan

Publisher: Springer Science & Business Media

Published: 2013-03-14

Total Pages: 294

ISBN-13: 1475754043

DOWNLOAD EBOOK

Standard voltages used in today's ICs may vary from about 1.3V to more than 100V, depending on the technology and the application. High voltage is therefore a relative notion. High Voltage Devices and Circuits in Standard CMOS Technologies is mainly focused on standard CMOS technologies, where high voltage (HV) is defined as any voltage higher than the nominal (low) voltage, i.e. 5V, 3.3V, or even lower. In this standard CMOS environment, IC designers are more and more frequently confronted with HV problems, particularly at the I/O level of the circuit. In the first group of applications, a large range of industrial or consumer circuits either require HV driving capabilities, or are supposed to work in a high-voltage environment. This includes ultrasonic drivers, flat panel displays, robotics, automotive, etc. On the other hand, in the emerging field of integrated microsystems, MEMS actuators mainly make use of electrostatic forces involving voltages in the typical range of 30 to 60V. Last but not least, with the advent of deep sub-micron and/or low-power technologies, the operating voltage tends towards levels ranging from 1V to 2.5V, while the interface needs to be compatible with higher voltages, such as 5V. For all these categories of applications, it is usually preferable to perform most of the signal processing at low voltage, while the resulting output rises to a higher voltage level. Solving this problem requires some special actions at three levels: technology, circuit design and layout. High Voltage Devices and Circuits in Standard CMOS Technologies addresses these topics in a clear and organized way. The theoretical background is supported by practical information and design examples. It is an invaluable reference for researchers and professionals in both the design and device communities.


Design of High Voltage xDSL Line Drivers in Standard CMOS

Design of High Voltage xDSL Line Drivers in Standard CMOS

Author: Bert Serneels

Publisher: Springer Science & Business Media

Published: 2008-01-08

Total Pages: 194

ISBN-13: 1402067909

DOWNLOAD EBOOK

This book fits in the quest for highly efficient fully integrated xDSL modems for central office applications. It presents a summary of research at one of Europe’s most famous analog design research groups over a five year period. The book focuses on the line driver, the most demanding building block of the xDSL modem for lowering power. The book covers the total design flow of monolithic CMOS high voltage circuits. It is essential reading for analog design engineers.


Parasitic Substrate Coupling in High Voltage Integrated Circuits

Parasitic Substrate Coupling in High Voltage Integrated Circuits

Author: Pietro Buccella

Publisher: Springer

Published: 2018-03-14

Total Pages: 195

ISBN-13: 3319743821

DOWNLOAD EBOOK

This book introduces a new approach to model and predict substrate parasitic failures in integrated circuits with standard circuit design tools. The injection of majority and minority carriers in the substrate is a recurring problem in smart power ICs containing high voltage, high current switching devices besides sensitive control, protection and signal processing circuits. The injection of parasitic charges leads to the activation of substrate bipolar transistors. This book explores how these events can be evaluated for a wide range of circuit topologies. To this purpose, new generalized devices implemented in Verilog-A are used to model the substrate with standard circuit simulators. This approach was able to predict for the first time the activation of a latch-up in real circuits through post-layout SPICE simulation analysis. Discusses substrate modeling and circuit-level simulation of parasitic bipolar device coupling effects in integrated circuits; Includes circuit back-annotation of the parasitic lateral n-p-n and vertical p-n-p bipolar transistors in the substrate; Uses Spice for simulation and characterization of parasitic bipolar transistors, latch-up of the parasitic p-n-p-n structure, and electrostatic discharge (ESD) protection devices; Offers design guidelines to reduce couplings by adding specific protections.


Optoelectronic Circuits in Nanometer CMOS Technology

Optoelectronic Circuits in Nanometer CMOS Technology

Author: Mohamed Atef

Publisher: Springer

Published: 2016-03-04

Total Pages: 253

ISBN-13: 3319273388

DOWNLOAD EBOOK

This book describes the newest implementations of integrated photodiodes fabricated in nanometer standard CMOS technologies. It also includes the required fundamentals, the state-of-the-art, and the design of high-performance laser drivers, transimpedance amplifiers, equalizers, and limiting amplifiers fabricated in nanometer CMOS technologies. This book shows the newest results for the performance of integrated optical receivers, laser drivers, modulator drivers and optical sensors in nanometer standard CMOS technologies. Nanometer CMOS technologies rapidly advanced, enabling the implementation of integrated optical receivers for high data rates of several Giga-bits per second and of high-pixel count optical imagers and sensors. In particular, low cost silicon CMOS optoelectronic integrated circuits became very attractive because they can be extensively applied to short-distance optical communications, such as local area network, chip-to-chip and board-to-board interconnects as well as to imaging and medical sensors.


Analog Circuit Design

Analog Circuit Design

Author: Johan Huijsing

Publisher: Springer Science & Business Media

Published: 2013-03-20

Total Pages: 406

ISBN-13: 1402028059

DOWNLOAD EBOOK

Analog Circuit Design contains the contribution of 18 experts from the 13th International Workshop on Advances in Analog Circuit Design. It is number 13 in the successful series of Analog Circuit Design. It provides 18 excellent overviews of analog circuit design in: Sensor and Actuator Interfaces, Integrated High-Voltage Electronics and Power Management, and Low-Power and High-Resolution ADC’s. Analog Circuit Design is an essential reference source for analog circuits designers and researchers wishing to keep abreast with the latest developments in the field. The tutorial coverage also makes it suitable for use in an advanced design course.


CMOS - MEMS

CMOS - MEMS

Author: Henry Baltes

Publisher: John Wiley & Sons

Published: 2013-03-26

Total Pages: 610

ISBN-13: 352767506X

DOWNLOAD EBOOK

This edition of 'CMOS-MEMS' was originally published in the successful series 'Advanced Micro & Nanosystems'. Here, the combination of the globally established, billion dollar chip mass fabrication technology CMOS with the fascinating and commercially promising new world of MEMS is covered from all angles. The book introduces readers to this fi eld and takes them from fabrication technologies and material charaterization aspects to the actual applications of CMOS-MEMS - a wide range of miniaturized physical, chemical and biological sensors and RF systems. Vital knowledge on circuit and system integration issues concludes this in-depth treatise, illustrating the advantages of combining CMOS and MEMS in the first place, rather than having a hybrid solution.


Handbook of Neuroprosthetic Methods

Handbook of Neuroprosthetic Methods

Author: Warren E. Finn

Publisher: CRC Press

Published: 2002-12-16

Total Pages: 453

ISBN-13: 1420040871

DOWNLOAD EBOOK

Work in the field of neuroprosthetics requires multidisciplinary teams, but these collaborators must meet on common ground to develop an understanding of the capabilities and limitations of each part of a bioengineering project. The Handbook of Neuroprosthetic Methods provides a comprehensive resource for the techniques, methodologies, and options


Non-logic Devices in Logic Processes

Non-logic Devices in Logic Processes

Author: Yanjun Ma

Publisher: Springer

Published: 2017-03-29

Total Pages: 290

ISBN-13: 3319483390

DOWNLOAD EBOOK

This book shows readers how to design semiconductor devices using the most common and lowest cost logic CMOS processes. Readers will benefit from the author’s extensive, industrial experience and the practical approach he describes for designing efficiently semiconductor devices that typically have to be implemented using specialized processes that are expensive, time-consuming, and low-yield. The author presents an integrated picture of semiconductor device physics and manufacturing techniques, as well as numerous practical examples of device designs that are tried and true.


Medical Imaging

Medical Imaging

Author: Krzysztof Iniewski

Publisher: John Wiley & Sons

Published: 2009-03-23

Total Pages: 324

ISBN-13: 0470391642

DOWNLOAD EBOOK

A must-read for anyone working in electronics in the healthcare sector This one-of-a-kind book addresses state-of-the-art integrated circuit design in the context of medical imaging of the human body. It explores new opportunities in ultrasound, computed tomography (CT), magnetic resonance imaging (MRI), nuclear medicine (PET, SPECT), emerging detector technologies, circuit design techniques, new materials, and innovative system approaches. Divided into four clear parts and with contributions from a panel of international experts, Medical Imaging systematically covers: X-ray imaging and computed tomography–X-ray and CT imaging principles; Active Matrix Flat Panel Imagers (AMFPI) for diagnostic medical imaging applications; photon counting and integrating readout circuits; noise coupling in digital X-ray imaging Nuclear medicine–SPECT and PET imaging principles; low-noise electronics for radiation sensors Ultrasound imaging–Electronics for diagnostic ultrasonic imaging Magnetic resonance imaging–Magnetic resonance imaging principles; MRI technology