This book describes design techniques that can be used to mitigate crosstalk in high-speed I/O circuits. The focus of the book is in developing compact and low power integrated circuits for crosstalk cancellation, inter-symbol interference (ISI) mitigation and improved bit error rates (BER) at higher speeds. This book is one of the first to discuss in detail the problem of crosstalk and ISI mitigation encountered as data rates have continued beyond 10Gb/s. Readers will learn to avoid the data performance cliff, with circuits and design techniques described for novel, low power crosstalk cancellation methods that are easily combined with current ISI mitigation architectures.
What makes some computers slow? Why do some digital systems operate reliably for years while others fail mysteriously every few hours? How can some systems dissipate kilowatts while others operate off batteries? These questions of speed, reliability, and power are all determined by the system-level electrical design of a digital system. Digital Systems Engineering presents a comprehensive treatment of these topics. It combines a rigorous development of the fundamental principles in each area with real-world examples of circuits and methods. The book not only serves as an undergraduate textbook, filling the gap between circuit design and logic design, but can also help practising digital designers keep pace with the speed and power of modern integrated circuits. The techniques described in this book, once used only in supercomputers, are essential to the correct and efficient operation of any type of digital system.
Analog Circuit Design contains the contribution of 18 tutorials of the 17th workshop on Advances in Analog Circuit Design. Each part discusses a specific to-date topic on new and valuable design ideas in the area of analog circuit design. Each part is presented by six experts in that field and state of the art information is shared and overviewed. This book is number 17 in this successful series of Analog Circuit Design.
The only book on integrated circuits for optical communications that fully covers High-Speed IOs, PLLs, CDRs, and transceiver design including optical communication The increasing demand for high-speed transport of data has revitalized optical communications, leading to extensive work on high-speed device and circuit design. With the proliferation of the Internet and the rise in the speed of microprocessors and memories, the transport of data continues to be the bottleneck, motivating work on faster communication channels. Design of Integrated Circuits for Optical Communications, Second Edition deals with the design of high-speed integrated circuits for optical communication transceivers. Building upon a detailed understanding of optical devices, the book describes the analysis and design of critical building blocks, such as transimpedance and limiting amplifiers, laser drivers, phase-locked loops, oscillators, clock and data recovery circuits, and multiplexers. The Second Edition of this bestselling textbook has been fully updated with: A tutorial treatment of broadband circuits for both students and engineers New and unique information dealing with clock and data recovery circuits and multiplexers A chapter dedicated to burst-mode optical communications A detailed study of new circuit developments for optical transceivers An examination of recent implementations in CMOS technology This text is ideal for senior graduate students and engineers involved in high-speed circuit design for optical communications, as well as the more general field of wireline communications.
"This book covers a great variety of topics such as materials, environment, electronics, and computing, offering a vital source of information detailing the latest architectures, frameworks, methodologies, and research on energy-aware systems and networking for sustainable initiatives"--
This book explores the unique advantages and large inherent transmission capacity of optical fiber communication systems. The long-term and high-risk research challenges of optical transceivers are analyzed with a view to sustaining the seemingly insatiable demand for bandwidth. A broad coverage of topics relating to the design of high-speed optical devices and integrated circuits, oriented to low power, low cost, and small area, is discussed.Written by specialists with many years of research and engineering experience in the field of optical fiber communication, this book is essential for an audience dedicated to the development of integrated electronic systems for optical communication applications. It can also be used as a supplementary text for graduate courses on optical transceiver IC design.
This book describes machine learning-based new principles, methods of design and optimization of high-speed integrated circuits, included in one electronic system, which can exchange information between each other up to 128/256/512 Gbps speed. The efficiency of methods has been proven and is described on the examples of practical designs. This will enable readers to use them in similar electronic system designs. The author demonstrates newly developed principles and methods to accelerate communication between ICs, working in non-standard operating conditions, considering signal deviation compensation with linearity self-calibration. The observed circuit types also include but are not limited to mixed-signal, high performance heterogeneous integrated circuits as well as digital cores.
Over the past decade, reducing the dynamic switching power was the main focus in many of the proposed low-power circuit techniques. At that time, the off-state leakage power was negligible compared to dynamic power. However, as technology scales into the deep-submicron regime, the increase in leakage power can no longer be neglected. Soon, the biggest challenge that SoC designers must resolve is the fact that transistors for digital and memory circuits will be more and more leaky as technology generations advance. The semiconductor industry must therefore reduce leakage current in chip designs by two orders of magnitude over the next ten years, or face an interruption in projected chip complexity. Failure to do so would make the mounting leakage current the "big stumbling block to Moore's Law". Furthermore, cooperative approaches between computer-aided design development, circuit design, and technology process must be examined. Multi-Threshold CMOS Digital Circuits Managing Leakage Power discusses the Multi-threshold voltage CMOS (MTCMOS) technology, that has emerged as an increasingly popular technique to control the escalating leakage power, while maintaining high performance. The book addresses the leakage problem in a number of designs for combinational, sequential, dynamic, and current-steering logic. Moreover, computer-aided design methodologies for designing low-leakage integrated circuits are presented. The book give an excellent survey of state-of-the-art techniques presented in the literature as well as proposed designs that minimize leakage power, while achieving high-performance. Multi-Threshold CMOS Digital Circuits Managing Leakage Power is written for students of VLSI design as well as practicing circuit designers, system designers, CAD tool developers and researchers. It assumes a basic knowledge of digital circuit design and device operation, and covers a broad range of circuit design techniques.
In the past, a number of Satellite Conferences have been held in con nection with the International Conference on Physics of Semiconductors, covering selected fields of interest. In 1986, when the main conference was held in Stockholm, Sweden, new. phenomena had to be discussed: super lattices, hot 'electron phenomena and new device structures for high-speed applications. The aim was to select topics which would be of interest to physicists as well as to electronics engineers. Therefore a Satellite Con ference on H!gh-Speed Electronics, Basic Physical Phenomena and Device Principles, was arranged at Saltjobaden, a coastal resort near Stockholm. An organizing committee was established after the first suggestion made by Professor Grimmeiss from the University of Lund, Sweden, and some preliminary discussions on the Conference format. A Program Committee was established to be responsible for the further selection of the invited talks, the regular papers and poster presentation. The aim was to have a broad spectrum of contributions to attract physicists as well as device oriented engineers and to stimulate discussions among the participants. These Proceedings contain all oral and poster presentations, with em phasis on the invited talks, which give a competent overview of the field. The fast publication by Springer-Verlag has permitted the presentation of an up-to-date survey of the principles of high-speed electronics. Incorpo ration in the Springer Series in Electronics and Photonics will enable the book to be distributed worldwide and to reach all interested scientists.
