Supermagnets, Hard Magnetic Materials
Supermagnets, Hard Magnetic Materials

Author: G.J Long

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 840

ISBN-13: 9401133247

DOWNLOAD EBOOK

The book you are now holding represents the final step in a long process for the editors and organizers of the Advanced Study Institute on hard magnetic materials. The editors interest in hard magnetic materials began in 1985 with an attempt to better understand the moments associated with the different iron sites in Nd Fe B. These 14 moments can be obtained from neutron diffraction studies, but we qUickly realized that iron-57 Mossbauer spectroscopy should lead to a better determination of these moments. However, it was also realized that the complex Mossbauer spectra obtained for these hard magnetic materials could not be easily understood without a broad knowledge of their various structural, electronic, and magnetic properties. Hence it seemed useful to the editors to bring together scientists and engineers to discuss, in a tutorial setting, the various properties of these and future hard magnetic materials. We believe the inclusion of engineers as well as scientists in these discussions was essential because the design of new magnetic materials depends very much upon the mode in which they are used in practical devices.

Hard Magnetic Alloys
Hard Magnetic Alloys

Author:

Publisher: Springer

Published: 1992-12-16

Total Pages: 327

ISBN-13: 9783540554639

DOWNLOAD EBOOK

Volume 19 of Group III (Crystal and Solid State Physics) deals with the magnetic properties of metals, alloys and metallic compounds. The amount of information available in this field is so substantial that several subvolumes are needed to cover it all. Subvolumes III/19a through III/19f treat the intrinsic magnetic properties, i.e. those magnetic properties which depend only on the chemical composition and the crystal structure. So far, subvolumes III/19a, III/19b, III/19c, III/19d1, III/19d2, III/19e1, III/19e2 and III/19f1 have appeared. Data on the properties that depend on the preparation of the samples measured, as for instance, thin films, amorphous alloys or the magnetic alloys used in technical applications, are being compiled in the subvolume of III/19g (Thin Films) and III/19h which covers the magnetic properties of liquid quenched alloys containing transition elements. This subvolume III/19i2 deals with the magnetic properties of hard magnetic alloys for permanent magnets. The large fields of both the well-known magnets based on 3d elements and the currently widely investigated alloys based on rare earth elements are covered. The relation between the permanent magnet properties and the various preparation techniques of the alloys has obtained special attention.

Hard Magnetic Alloys
Hard Magnetic Alloys

Author:

Publisher: Springer

Published: 1992-12-16

Total Pages: 0

ISBN-13: 9783540554639

DOWNLOAD EBOOK

Volume 19 of Group III (Crystal and Solid State Physics) deals with the magnetic properties of metals, alloys and metallic compounds. The amount of information available in this field is so substantial that several subvolumes are needed to cover it all. Subvolumes III/19a through III/19f treat the intrinsic magnetic properties, i.e. those magnetic properties which depend only on the chemical composition and the crystal structure. So far, subvolumes III/19a, III/19b, III/19c, III/19d1, III/19d2, III/19e1, III/19e2 and III/19f1 have appeared. Data on the properties that depend on the preparation of the samples measured, as for instance, thin films, amorphous alloys or the magnetic alloys used in technical applications, are being compiled in the subvolume of III/19g (Thin Films) and III/19h which covers the magnetic properties of liquid quenched alloys containing transition elements. This subvolume III/19i2 deals with the magnetic properties of hard magnetic alloys for permanent magnets. The large fields of both the well-known magnets based on 3d elements and the currently widely investigated alloys based on rare earth elements are covered. The relation between the permanent magnet properties and the various preparation techniques of the alloys has obtained special attention.

Hard Magnetic Alloys
Hard Magnetic Alloys

Author:

Publisher: Springer

Published: 1992-12-16

Total Pages: 0

ISBN-13: 9783540554639

DOWNLOAD EBOOK

Volume 19 of Group III (Crystal and Solid State Physics) deals with the magnetic properties of metals, alloys and metallic compounds. The amount of information available in this field is so substantial that several subvolumes are needed to cover it all. Subvolumes III/19a through III/19f treat the intrinsic magnetic properties, i.e. those magnetic properties which depend only on the chemical composition and the crystal structure. So far, subvolumes III/19a, III/19b, III/19c, III/19d1, III/19d2, III/19e1, III/19e2 and III/19f1 have appeared. Data on the properties that depend on the preparation of the samples measured, as for instance, thin films, amorphous alloys or the magnetic alloys used in technical applications, are being compiled in the subvolume of III/19g (Thin Films) and III/19h which covers the magnetic properties of liquid quenched alloys containing transition elements. This subvolume III/19i2 deals with the magnetic properties of hard magnetic alloys for permanent magnets. The large fields of both the well-known magnets based on 3d elements and the currently widely investigated alloys based on rare earth elements are covered. The relation between the permanent magnet properties and the various preparation techniques of the alloys has obtained special attention.

Hard Magnetic Alloys
Hard Magnetic Alloys

Author:

Publisher: Springer

Published: 1992-12-16

Total Pages: 327

ISBN-13: 9783540554639

DOWNLOAD EBOOK

Volume 19 of Group III (Crystal and Solid State Physics) deals with the magnetic properties of metals, alloys and metallic compounds. The amount of information available in this field is so substantial that several subvolumes are needed to cover it all. Subvolumes III/19a through III/19f treat the intrinsic magnetic properties, i.e. those magnetic properties which depend only on the chemical composition and the crystal structure. So far, subvolumes III/19a, III/19b, III/19c, III/19d1, III/19d2, III/19e1, III/19e2 and III/19f1 have appeared. Data on the properties that depend on the preparation of the samples measured, as for instance, thin films, amorphous alloys or the magnetic alloys used in technical applications, are being compiled in the subvolume of III/19g (Thin Films) and III/19h which covers the magnetic properties of liquid quenched alloys containing transition elements. This subvolume III/19i2 deals with the magnetic properties of hard magnetic alloys for permanent magnets. The large fields of both the well-known magnets based on 3d elements and the currently widely investigated alloys based on rare earth elements are covered. The relation between the permanent magnet properties and the various preparation techniques of the alloys has obtained special attention.

Hard Magnetic Alloys
Hard Magnetic Alloys

Author:

Publisher: Springer

Published: 1992-12-16

Total Pages: 327

ISBN-13: 9783540554639

DOWNLOAD EBOOK

Volume 19 of Group III (Crystal and Solid State Physics) deals with the magnetic properties of metals, alloys and metallic compounds. The amount of information available in this field is so substantial that several subvolumes are needed to cover it all. Subvolumes III/19a through III/19f treat the intrinsic magnetic properties, i.e. those magnetic properties which depend only on the chemical composition and the crystal structure. So far, subvolumes III/19a, III/19b, III/19c, III/19d1, III/19d2, III/19e1, III/19e2 and III/19f1 have appeared. Data on the properties that depend on the preparation of the samples measured, as for instance, thin films, amorphous alloys or the magnetic alloys used in technical applications, are being compiled in the subvolume of III/19g (Thin Films) and III/19h which covers the magnetic properties of liquid quenched alloys containing transition elements. This subvolume III/19i2 deals with the magnetic properties of hard magnetic alloys for permanent magnets. The large fields of both the well-known magnets based on 3d elements and the currently widely investigated alloys based on rare earth elements are covered. The relation between the permanent magnet properties and the various preparation techniques of the alloys has obtained special attention.

Novel Functional Magnetic Materials
Novel Functional Magnetic Materials

Author: Arcady Zhukov

Publisher: Springer

Published: 2016-03-03

Total Pages: 455

ISBN-13: 3319261061

DOWNLOAD EBOOK

This book presents current research on advanced magnetic materials and multifunctional composites. Recent advances in technology and engineering have resulted from the development of advanced magnetic materials with improved functional magnetic and magneto-transport properties. Certain industrial sectors, such as magnetic sensors, microelectronics, and security, demand cost-effective materials with reduced dimensionality and desirable magnetic properties such as enhanced magnetic softness, giant magnetic field sensitivity, and large magnetocaloric effect. Expert chapters present the most up-to-date information on the fabrication process, processing, tailoring of properties, and applications of different families of modern functional materials for advanced smart applications. Topics covered include novel magnetic materials and applications; amorphous and nanocrystalline magnetic materials and applications; hard magnetic materials; magnetic shape memory alloys; and magnetic oxides. The book's highly interdisciplinary and forward-looking approach will benefit the scientific community, particularly researchers and advanced graduate students working in the field of advanced magnetic materials, composites, and high-performance sensor and microwave devices.

Hard Magnetic Alloys
Hard Magnetic Alloys

Author:

Publisher: Springer

Published: 1992-12-16

Total Pages: 327

ISBN-13: 9783540554639

DOWNLOAD EBOOK

Volume 19 of Group III (Crystal and Solid State Physics) deals with the magnetic properties of metals, alloys and metallic compounds. The amount of information available in this field is so substantial that several subvolumes are needed to cover it all. Subvolumes III/19a through III/19f treat the intrinsic magnetic properties, i.e. those magnetic properties which depend only on the chemical composition and the crystal structure. So far, subvolumes III/19a, III/19b, III/19c, III/19d1, III/19d2, III/19e1, III/19e2 and III/19f1 have appeared. Data on the properties that depend on the preparation of the samples measured, as for instance, thin films, amorphous alloys or the magnetic alloys used in technical applications, are being compiled in the subvolume of III/19g (Thin Films) and III/19h which covers the magnetic properties of liquid quenched alloys containing transition elements. This subvolume III/19i2 deals with the magnetic properties of hard magnetic alloys for permanent magnets. The large fields of both the well-known magnets based on 3d elements and the currently widely investigated alloys based on rare earth elements are covered. The relation between the permanent magnet properties and the various preparation techniques of the alloys has obtained special attention.

Alloy Materials and Their Allied Applications
Alloy Materials and Their Allied Applications

Author: Inamuddin

Publisher: John Wiley & Sons

Published: 2020-06-16

Total Pages: 240

ISBN-13: 1119654882

DOWNLOAD EBOOK

Alloy Materials and Their Allied Applications provides an in-depth overview of alloy materials and applications. The 11 chapters focus on the fabrication methods and design of corrosion-resistant, magnetic, biodegradable, and shape memory alloys. The industrial applications in the allied areas, such as biomedical, dental implants, abrasive finishing, surface treatments, photocatalysis, water treatment, and batteries, are discussed in detail. This book will help readers solve fundamental and applied problems faced in the field of allied alloys applications.

Frontiers in Magnetic Materials
Frontiers in Magnetic Materials

Author: Chen Wu

Publisher: CRC Press

Published: 2022-08-12

Total Pages: 287

ISBN-13: 1000623440

DOWNLOAD EBOOK

The book aims to provide comprehensive and practical guidance on magnetism and magnetic materials. It involves four parts, focusing on fundamental magnetism, hard magnetic materials, soft magnetic materials and other functional magnetic materials. Part I highlights the ubiquity of magnetism and the close relationships between magnetic materials and our daily life. Perspectives on magnetism from Engineering and Physics are provided to introduce the two unit systems, followed by the origin and categories of magnetisms. An introduction of important parameters during magnetization and magnetic measurement techniques are then provided to lay a solid foundation for the readers for better understandings of the design and development of different magnetic materials. Important magnetic materials are then introduced in the subsequent parts, delivering an overview of design principles, production technologies, research developments and real-world applications. For instance, rare-earth-free and rare-earth-based hard magnetic materials as well as soft magnetic materials such as Fe-based alloys, composites and ferrites are discussed. Other functional magnetic materials span a wide range, involving smart materials with magneto-X effects, together with magnetic materials for applications including electromagnetic wave absorption, biomedicine and catalysis, etc. For these magnetic materials, more emphasis is placed on the latest advances and interdisciplinary perspectives.