Focusing on the use of microlithography techniques in microelectronics manufacturing, this volume is one of a series addressing a rapidly growing field affecting the integrated circuit industry. New applications in such areas as sensors, actuators and biomedical devices, are described.
Lithography is a field in which advances proceed at a swift pace. This book was written to address several needs, and the revisions for the second edition were made with those original objectives in mind. Many new topics have been included in this text commensurate with the progress that has taken place during the past few years, and several subjects are discussed in more detail. This book is intended to serve as an introduction to the science of microlithography for people who are unfamiliar with the subject. Topics directly related to the tools used to manufacture integrated circuits are addressed in depth, including such topics as overlay, the stages of exposure, tools, and light sources. This text also contains numerous references for students who want to investigate particular topics in more detail, and they provide the experienced lithographer with lists of references by topic as well. It is expected that the reader of this book will have a foundation in basic physics and chemistry. No topics will require knowledge of mathematics beyond elementary calculus.
This Field Guide distills the material written by Chris Mack over the past 20 years, including notes from his graduate-level lithography course at the University of Texas at Austin. It details the lithography process, image formation, imaging onto a photoresist, photoresist chemistry, and lithography control and optimization. An introduction to next-generation lithographic technologies is also included, as well as an extensive lithography glossary and a summation of salient equations critical to anyone involved in the lithography industry.
"In this practical handbook, Paul Croft offers a comprehensive approach to the many aspects of lithography. Through simplified steps the information is presented in a logical and meaningful manner. This lavishly illustrated guide is also teeming with examples of prints from an international group of artists, showing the beautiful work that is being produced around the world today."--BOOK JACKET.Title Summary field provided by Blackwell North America, Inc. All Rights Reserved
The fabrication of an integrated circuit requires a variety of physical and chemical processes to be performed on a semiconductor substrate. In general, these processes fall into three categories: film deposition, patterning, and semiconductor doping. Films of both conductors and insulators are used to connect and isolate transistors and their components. By creating structures of these various components millions of transistors can be built and wired together to form the complex circuitry of modern microelectronic devices. Fundamental to all of these processes is lithography, ie, the formation of three-dimensional relief images on the substrate for subsequent transfer of the pattern to the substrate. This book presents a complete theoretical and practical treatment of the topic of lithography for both students and researchers. It comprises ten detailed chapters plus three appendices with problems provided at the end of each chapter. Additional Information: Visiting http://www.lithoguru.com/textbook/index.html enhances the reader's understanding as the website supplies information on how you can download a free laboratory manual, Optical Lithography Modelling with MATLAB®, to accompany the textbook. You can also contact the author and find help for instructors.
This handbook gives readers a close look at the entire technology of printing very high resolution and high density integrated circuit (IC) patterns into thin resist process transfer coatingsùincluding optical lithography, electron beam, ion beam, and x-ray lithography. The book's main theme is the special printing process needed to achieve volume high density IC chip production, especially in the Dynamic Random Access Memory (DRAM) industry. The book leads off with a comparison of various lithography methods, covering the three major patterning parameters of line/space, resolution, line edge and pattern feature dimension control. The book's explanation of resist and resist process equipment technology may well be the first practical description of the relationship between the resist process and equipment parameters. The basics of resist technology are completely coveredùincluding an entire chapter on resist process defectivity and the potential yield limiting effect on device production.Each alternative lithographic technique and testing method is considered and evaluated: basic metrology including optical, scanning-electron-microscope (SEM) techniques and electrical test devices, along with explanations of actual printing tools and their design, construction and performance. The editor devotes an entire chapter to today's sophisticated, complex electron-beam printers, and to the emerging x-ray printing technology now used in high-density CMOS devices. Energetic ion particle printing is a controllable, steerable technology that does not rely on resist, and occupies a final section of the handbook.
Semiconductor lithography is one of the key steps in the manufacturing of integrated silicon-based circuits. In fabricating a semiconductor device such as a transistor, a series of hot processes consisting of vacuum film deposition, oxidations, and dopant implantation are all patterned into microscopic circuits by the wet processes of lithography. Lithography, as adopted by the semiconductor industry, is the process of drawing or printing the pattern of an integrated circuit in a resist material. The pattern is formed and overlayed to a previous circuit layer as many as 30 times in the manufacture of logic and memory devices. With the resist pattern acting as a mask, a permanent device structure is formed by subtractive (removal) etching or by additive deposition of metals or insulators. Each process step in lithography uses inorganic or organic materials to physically transform semiconductors of silicon, insulators of oxides, nitrides, and organic polymers, and metals, into useful electronic devices. All forms of electromagnetic radiation are used in the processing. Lithography is a mUltidisciplinary science of materials, processes, and equipment, interacting to produce three-dimensional structures. Many aspects of chemistry, electrical engineering, materials science, and physics are involved. The purpose of this book is to bring together the work of many scientists and engineers over the last 10 years and focus upon the basic resist materials, the lithographic processes, and the fundamental principles behind each lithographic process.
This Printmaking Handbook is a companion volume to Paul Croft's previous book, Stone Lithography. The author guides the reader through all aspects of plate lithography with step-by-step instructions accompanied by clear, colour photographs. The author also includes amazing work by well-known practitioners from around the world. This beautifully illustrated, yet practical guide, is essential for all those interested in lithography.
This text covers lithography process control at several levels, from fundamental through advanced topics. The book is a self-contained tutorial that works both as an introduction to the technology and as a reference for the experienced lithographer. It reviews the foundations of statistical process control as background for advanced topics such as complex processes and feedback. In addition, it presents control methodologies that may be applied to process development pilot lines.
