A highly practical approach to solving noise control problems in electronic systems. Provides basics on handling noise problems, on building instrumentation systems, and on interconnecting systems. Reviews physics of electrostatics, then covers active elements, amplifiers, signal conditioning, isolation transformers, and more. Includes an enlarged treatment of RF processes. Features figures and drawings. Revised, expanded, and updated from the successful 1967 edition.
This book will allow you to gain practical skills and know-how in grounding, bonding, lightning & surge protection. Few topics generate as much controversy and argument as that of grounding and the associated topics of surge protection, shielding and lightning protection of electrical and electronic systems. Poor grounding practice can be the cause of continual and intermittent difficult-to-diagnose problems in a facility. This book looks at these issues from a fresh yet practical perspective and enables you to reduce expensive downtime on your plant and equipment to a minimum by correct application of these principles.Learning outcomes:* Apply the various methods of grounding electrical systems* Detail the applicable national Standards* Describe the purposes of grounding and bonding* List the types of systems that cannot be grounded* Describe what systems can be operated ungrounded* Correctly shield sensitive communications cables from noise and interference* Apply practical knowledge of surge and transient protection* Troubleshoot and fix grounding and surge problems* Design, install and test an effective grounding system for electronic equipment* Understand lightning and how to minimize its impact on your facility* Protect sensitive equipment from lightning· An engineer's guide to earthing, shielding, lightning and surge protection designed to deliver reliable equipment and communications systems that comply with international and national codes · Discover how to reduce plant downtime and intermittent faults by implementing best-practice grounding/earthing techniques· Learn the principles of cable shielding in communication networks
GROUNDS FOR GROUNDING The first book to cover grounding from the circuit to system and across the entire spectrum of applications Grounds for Grounding provides a complete and thorough approach to the subject of designing electrical and electronic circuits and systems, blending theory and practice to demonstrate how a few basic rules can be applied across a broad range of applications. The authors begin with the basic concepts of Electromagnetic Compatibility (EMC) that are essential for understanding grounding theory and its applications, such as “ground loop,” which is one of the most misunderstood concepts in EMC. Next, they provide an introduction to grounding, including safety grounding, grounding for control of electromagnetic interference, and grounding-related case studies. Subsequent chapter coverage includes: Fundamentals of grounding design Bonding principles Grounding for power distribution and lightning protection systems Grounding in wiring circuits and cable shields Grounding of EMI terminal protection devices Grounding on printed circuit boards Integrated facility and platform grounding system Practical case studies are integrated throughout the book to aid in readers’ comprehension and each chapter concludes with a useful bibliography. Grounds for Grounding is an indispensable resource for electrical and electronic engineers who work with the design of circuits, systems, and facilities.
MIL-HDBK-419A 29 DECEMBER 1987 Volume 2 of 2 Applications Unfortunately, few Military Handbooks address the need for defense against electromagnetic pulse (EMP) and cybersecurity. While EMP has been thought of as a remote possibility (who in his right mind is going to launch a nuclear weapon of any kind against the U.S.?) Advances in non-nuclear EMP, miniaturization of electronics and autonomous drones suddenly brings EMP into the role of the possible. No longer would an adversary need to risk retaliation when a drone from an unknown source attacks a vital facility. The information in this book is part of the solution to the question "How do we defend against EMP?" List of Applicable EMP and Cybersecurity Publications: MIL-STD-188-125-1 High-altitude electromagnetic pulse (HEMP) Protection For Ground-Based C4I Facilities Performing Critical, Time-Urgent Missions MIL-STD-188-124A Grounding, Bonding and Shielding for Common Long Haul/Tactical Communication Systems MIL-HDBK -1195 Radio Frequency Shielded Enclosures TOP 01-2-620 High-Altitude Electromagnetic Pulse (HEMP) Testing MIL-HDBK-1012/1 Electronic Facilities Engineering MIL-HDBK-1013/1A Design Guidelines for Physical Security of Facilities
This is a guide for the system designers and installers faced with the day-to-day issues of achieving EMC, and will be found valuable across a wide range of roles and sectors, including process control, manufacturing, medical, IT and building management. The EMC issues covered will also make this book essential reading for product manufacturers and suppliers - and highly relevant for managers as well as technical staff. The authors' approach is thoroughly practical - all areas of installation EMC are covered, with particular emphasis on cabling and earthing. Students on MSc and CPD programmes will also find in this book some valuable real-world antidotes to the academic treatises. The book is presented in two parts: the first is non-technical, and looks at the need for EMC in the context of systems and installations, with a chapter on the management aspects of EMC. The second part covers the technical aspects of EMC, looking at the various established methods which can be applied to ensure compatibility, and setting these in the context of the new responsibilities facing system builders. EMC for Systems and Installations is designed to complement Tim Williams' highly successful EMC for Product Designers. - Practical guide to EMC design issues for those involved in systems design and installation - Complementary title to Williams' bestselling EMC for Product Designers - Unique guidance for installers on EMC topics
This updated and expanded version of the very successful first edition offers new chapters on controlling the emission from electronic systems, especially digital systems, and on low-cost techniques for providing electromagnetic compatibility (EMC) for consumer products sold in a competitive market. There is also a new chapter on the susceptibility of electronic systems to electrostatic discharge. There is more material on FCC regulations, digital circuit noise and layout, and digital circuit radiation. Virtually all the material in the first edition has been retained. Contains a new appendix on FCC EMC test procedures.
A step-by-step guide to solving noise and interference problems in the digital age The rapid growth of digital technology over the past decade has brought the analog world into direct contact with high-speed operations and electromagnetic processes--and created a host of new problems for designers. This new twist requires different approaches to issues of noise and interference in digital processing, high-speed communication, mass data storage, and high-frequency applications. Grounding and Shielding Techniques, Fourth Edition is entirely rewritten to reflect these new challenges. This highly effective tool for the management of interference problems in electronic equipment treats the fundamentals of electrostatics as they relate to electromagnetic phenomena. Specifically, this volume deals with the new interference problems created when analog designs are buried in the middle of hardware that must meet radiation and susceptibility standards. It features: * Effective techniques for handling noise problems in a variety of circumstances * Step-by-step instructions for building noise-free instrument systems * Strategies for reducing or eliminating noise in interconnecting systems * Expanded discussion of multishielded transformers * An overview of current trends to limit the use of transformers * Real-world examples of factors influencing electronic noise * Simplified, practical explanations of the physics of fields * Dozens of illustrations and a clear, readable text. Grounding and Shielding Techniques, Fourth Edition is a state-of-the-art problem-solving guide for electronic design engineers and technicians. It is also an extremely useful text for short courses on electronic noise.
Praise for Noise Reduction Techniques IN electronic systems "Henry Ott has literally 'written the book' on the subject of EMC. . . . He not only knows the subject, but has the rare ability to communicate that knowledge to others." —EE Times Electromagnetic Compatibility Engineering is a completely revised, expanded, and updated version of Henry Ott's popular book Noise Reduction Techniques in Electronic Systems. It reflects the most recent developments in the field of electromagnetic compatibility (EMC) and noise reduction¿and their practical applications to the design of analog and digital circuits in computer, home entertainment, medical, telecom, industrial process control, and automotive equipment, as well as military and aerospace systems. While maintaining and updating the core information—such as cabling, grounding, filtering, shielding, digital circuit grounding and layout, and ESD—that made the previous book such a wide success, this new book includes additional coverage of: Equipment/systems grounding Switching power supplies and variable-speed motor drives Digital circuit power distribution and decoupling PCB layout and stack-up Mixed-signal PCB layout RF and transient immunity Power line disturbances Precompliance EMC measurements New appendices on dipole antennae, the theory of partial inductance, and the ten most common EMC problems The concepts presented are applicable to analog and digital circuits operating from below audio frequencies to those in the GHz range. Throughout the book, an emphasis is placed on cost-effective EMC designs, with the amount and complexity of mathematics kept to the strictest minimum. Complemented with over 250 problems with answers, Electromagnetic Compatibility Engineering equips readers with the knowledge needed to design electronic equipment that is compatible with the electromagnetic environment and compliant with national and international EMC regulations. It is an essential resource for practicing engineers who face EMC and regulatory compliance issues and an ideal textbook for EE courses at the advanced undergraduate and graduate levels.
Examines how to ground and shield electronic equipment and facilities to control interference. Explains the language of power engineers and the National Electrical Code. Lays the ground rules for safety then explains how to attack and solve problems in grounding and shielding via a field theoretic approach rather than a circuit approach. Provides background theory and describes various hardware and equipment, all key areas in grounding and shielding, ESD, screened rooms and topics in field coupling.
The definitive reference on electromagnetic shielding materials, configurations, approaches, and analyses This reference provides a comprehensive survey of options for the reduction of the electromagnetic field levels in prescribed areas. After an introduction and an overview of available materials, it discusses figures of merit for shielding configurations, the shielding effectiveness of stratified media, numerical methods for shielding analyses, apertures in planar metal screens, enclosures, and cable shielding. Up to date and comprehensive, Electromagnetic Shielding: Explores new and innovative techniques in electromagnetic shielding Presents a critical approach to electromagnetic shielding that highlights the limits of formulations based on plane-wave sources Analyzes aspects not normally considered in electromagnetic shielding, such as the effects of the content of the shielding enclosures Includes references at the end of each chapter to facilitate further study The last three chapters discuss frequency-selective shielding, shielding design procedures, and uncommon ways of shielding—areas ripe for further research. This is an authoritative, hands-on resource for practicing telecommunications and electrical engineers, as well as researchers in industry and academia who are involved in the design and analysis of electromagnetic shielding structures.
