Analysis of large deformation, rigid body movement and strain or stress for discontinuous materials is often required for project designs and plans in the fields of engineering and disaster prevention. Many numerical simulation and analysis methods have been developed for the requirement from science and technology people since 1970s. Among them, D
Numerical Methods and Implementation in Geotechnical Engineering explains several numerical methods that are used in geotechnical engineering. The second part of this reference set includes more information on the distinct element method, geotechnical optimization analysis and reliability analysis. Information about relevant additional numerical methods is also provided in each chapter with problems where applicable. The authors have also presented different computer programs associated with the materials in this book set which will be useful to students learning how to apply the models explained in the text into practical situations when designing structures in locations with specific soil and rock settings. This reference book set is a suitable textbook primer for civil engineering students as it provides a basic introduction to different numerical methods (classical and modern) in comprehensive readable volumes.
Numerical Methods and Implementation in Geotechnical Engineering explains several numerical methods that are used in geotechnical engineering. The first part of this reference set includes methods such as the finite element method, distinct element method, discontinuous deformation analysis, numerical manifold method, smoothed particle hydrodynamics method, material point method, plasticity method, limit equilibrium and limit analysis, plasticity, slope stability and foundation engineering, optimization analysis and reliability analysis. The authors have also presented different computer programs associated with the materials in this book which will be useful to students learning how to apply the models explained in the text into practical situations when designing structures in locations with specific soil and rock settings. This reference book set is a suitable textbook primer for civil engineering students as it provides a basic introduction to different numerical methods (classical and modern) in comprehensive readable volumes.
The numerical, discrete element, Discontinuous Deformation Analysis (DDA) method was developed by Dr. Gen-hua Shi while he was working at the University of California, Berkeley, under the supervision of Prof. Richard E. Goodman in the late 1980s. Two-dimensional DDA was published in 1993 and three-dimensional DDA in 2001. Since its publication DDA has been verified, validated and applied in numerous studies worldwide and is now considered a powerful and robust method to address both static and dynamic engineering problems in discontinuous rock masses. In this book Yossef H. Hatzor and Guowei Ma, co-chairs of the International Society for Rock Mechanics (ISRM) Commission on DDA, join Dr. Shi in authoring a monograph that presents the state of the art in DDA research. A comprehensive discussion of DDA development since its publication is provided in Chapter 1, followed by concise reviews of 2D and 3D DDA in chapters 2 and 3. Procedures to select geological and numerical input parameters for DDA are discussed in Chapter 4, and DDA validation and verification is presented in Chapter 5. Applications of DDA in underground and rock slope engineering projects are discussed in chapters 6 and 7. In Chapter 8 the novel contact theory recently developed by Dr. Shi is published in its complete form, for the first time. This book is published within the framework of the ISRM Book Series and is the contribution of the ISRM DDA Commission to the international rock mechanics community.
Geomechanics from Micro to Macro contains 268 papers presented at the International Symposium on Geomechanics from Micro and Macro (IS-Cambridge, UK, 1-3 September 2014). The symposium created a forum for the dissemination of new advances in the micro-macro relations of geomaterial behaviour and its modelling. The papers on experimental investigati
The combined finite discrete element method is a relatively new computational tool aimed at problems involving static and / or dynamic behaviour of systems involving a large number of solid deformable bodies. Such problems include fragmentation using explosives (e.g rock blasting), impacts, demolition (collapsing buildings), blast loads, digging and loading processes, and powder technology. The combined finite-discrete element method - a natural extension of both discrete and finite element methods - allows researchers to model problems involving the deformability of either one solid body, a large number of bodies, or a solid body which fragments (e.g. in rock blasting applications a more or less intact rock mass is transformed into a pile of solid rock fragments of different sizes, which interact with each other). The topic is gaining in importance, and is at the forefront of some of the current efforts in computational modeling of the failure of solids. * Accompanying source codes plus input and output files available on the Internet * Important applications such as mining engineering, rock blasting and petroleum engineering * Includes practical examples of applications areas Essential reading for postgraduates, researchers and software engineers working in mechanical engineering.
This practical guide provides the best introduction to large deformation material point method (MPM) simulations for geotechnical engineering. It provides the basic theory, discusses the different numerical features used in large deformation simulations, and presents a number of applications -- providing references, examples and guidance when using MPM for practical applications. MPM covers problems in static and dynamic situations within a common framework. It also opens new frontiers in geotechnical modelling and numerical analysis. It represents a powerful tool for exploring large deformation behaviours of soils, structures and fluids, and their interactions, such as internal and external erosion, and post-liquefaction analysis; for instance the post-failure liquid-like behaviours of landslides, penetration problems such as CPT and pile installation, and scouring problems related to underwater pipelines. In the recent years, MPM has developed enough for its practical use in industry, apart from the increasing interest in the academic world.
This is the first-ever book on smoothed particle hydrodynamics (SPH) and its variations, covering the theoretical background, numerical techniques, code implementation issues, and many novel and interesting applications. It contains many appealing and practical examples, including free surface flows, high explosive detonation and explosion, underwater explosion and water mitigation of explosive shocks, high velocity impact and penetration, and multiple scale simulations coupled with the molecular dynamics method. An SPH source code is provided and coupling of SPH and molecular dynamics is discussed for multiscale simulation, making this a friendly book for readers and SPH users.
Extreme weather and climate events, interacting with exposed and vulnerable human and natural systems, can lead to disasters. This Special Report explores the social as well as physical dimensions of weather- and climate-related disasters, considering opportunities for managing risks at local to international scales. SREX was approved and accepted by the Intergovernmental Panel on Climate Change (IPCC) on 18 November 2011 in Kampala, Uganda.
Process Engineering, the science and art of transforming raw materials and energy into a vast array of commercial materials, was conceived at the end of the 19th Century. Its history in the role of the Process Industries has been quite honorable, and techniques and products have contributed to improve health, welfare and quality of life. Today, industrial enterprises, which are still a major source of wealth, have to deal with new challenges in a global world. They need to reconsider their strategy taking into account environmental constraints, social requirements, profit, competition, and resource depletion. “Systems thinking” is a prerequisite from process development at the lab level to good project management. New manufacturing concepts have to be considered, taking into account LCA, supply chain management, recycling, plant flexibility, continuous development, process intensification and innovation. This book combines experience from academia and industry in the field of industrialization, i.e. in all processes involved in the conversion of research into successful operations. Enterprises are facing major challenges in a world of fierce competition and globalization. Process engineering techniques provide Process Industries with the necessary tools to cope with these issues. The chapters of this book give a new approach to the management of technology, projects and manufacturing. Contents Part 1: The Company as of Today 1. The Industrial Company: its Purpose, History, Context, and its Tomorrow?, Jean-Pierre Dal Pont. 2. The Two Modes of Operation of the Company – Operational and Entrepreneurial, Jean-Pierre Dal Pont. 3. The Strategic Management of the Company: Industrial Aspects, Jean-Pierre Dal Pont. Part 2: Process Development and Industrialization 4. Chemical Engineering and Process Engineering, Jean-Pierre Dal Pont. 5. Foundations of Process Industrialization, Jean-François Joly. 6. The Industrialization Process: Preliminary Projects, Jean-Pierre Dal Pont and Michel Royer. 7. Lifecycle Analysis and Eco-Design: Innovation Tools for Sustainable Industrial Chemistry, Sylvain Caillol. 8. Methods for Design and Evaluation of Sustainable Processes and Industrial Systems, Catherine Azzaro-Pantel. 9. Project Management Techniques: Engineering, Jean-Pierre Dal Pont. Part 3: The Necessary Adaptation of the Company for the Future 10. Japanese Methods, Jean-Pierre Dal Pont. 11. Innovation in Chemical Engineering Industries, Oliver Potier and Mauricio Camargo. 12. The Place of Intensified Processes in the Plant of the Future, Laurent Falk. 13. Change Management, Jean-Pierre Dal Pont. 14. The Plant of the Future, Jean-Pierre Dal Pont.
