This Safety Report complements Safety Guide No. 50-SG-O12, Periodic Safety Review of Operational Nuclear Power Plants (1994). It provides practical information for the safety assessment and judgement process for operating nuclear power plants built to earlier standards, on the basis of a comparison with current safety standards and operational practices.
This report was prepared in response to the recommendation of the IAEA General Conference in 1992 that the Director General develop a process to provide a common basis on which the acceptable level of safety of all operating nuclear power plants built to earlier standards can be judged. This followed a recommendation made at the IAEA Conference on 'The Safety of Nuclear Power: Strategy for the Future' held in September 1991. The report also provides a basis for allocating responsibilities for, and deciding on the best approach to, making a safety assessment, and for selecting criteria to adopt in deciding on what corrective action to take.
This Safety Guide provides recommendations on the structure and content of the safety analysis report to be submitted by the operating organization to the regulatory body for authorization of the siting, construction, commissioning, operation and decommissioning of a nuclear power plant. It is intended to facilitate both the development of the safety analysis report by the operating organization and the checking of its completeness and adequacy by the regulatory body. The publication is a revision of IAEA Safety Standards Series No. GS-G-4.1, Format and Content of the Safety Analysis Report for Nuclear Power Plants, which it supersedes. The revision reflects feedback experience from the Fukushima Daiichi accident and the subsequent stress tests performed. It also describes good practices and experience from the use of safety analysis reports for newly built nuclear power plants in different States and informs on recent progress made in approaches to safety assessment.
On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.
This Safety Guide is intended primarily for use with land based stationary thermal nuclear power plants but it may, in parts, have a wider applicability to other nuclear facilities. It provides recommendations and guidance on the possible format and content of a SAR in support of a request to the State regulatory body for authorization to construct and or operate a nuclear power plant. As such, it contains recommendations on meeting the requirements of Safety guide GS-R-1 "Legal and governmental infrastructure for nuclear, radioactive waste and transport safety" (2000, ISBN 9201008007)
Provides recommendations and guidance on conducting periodic safety review (PSR) of an existing nuclear power plant. PSR is a comprehensive safety review of all important aspects of safety, carried out at regular intervals, typically every ten years.
