This interim report presents the findings of the initial literature review, a description of traffic data requirements for the M-E Design Guide for the Design of New and Rehabilitated Pavement Structures, and a preliminary sensitivity analysis conducted under typical Texas environmental conditions.
This interim report presents the findings of the literature review with particular emphasis on: (i) current regulations and trends on weights, lengths, and widths of commercial vehicles; and (ii) a review of state-of-the-art WIM technology. The report is complemented with a summary of the available WIM data in Texas to support Level 1 design in the M-E Design Guide.
The goal of this research study was to assess and address the implications of the axle load spectra approach proposed by the M-E Design Guide. In addition, recommendations were developed regarding traffic data needs and availability to aid in deciding the installation locations of future WIM stations in Texas. A methodology for specifying the required accuracy of WIM equipment based on the effect that this accuracy has on pavement performance prediction was also developed. Regarding traffic volume forecasting, a methodology is presented that allows optimum use of available data by simultaneously estimating traffic growth and seasonal traffic variability.
This book presents the latest advances in research to analyze mechanical damage and its detection in multilayer systems. The contents are linked to the Rilem TC241 - MCD scientific activities and the proceedings of the 8th RILEM International Conference on Mechanisms of Cracking and Debonding in Pavements (MCD2016). MCD2016 was hosted by Ifsttar and took place in Nantes, France, on June 7-9, 2016. In their lifetime, pavements undergo degradation due to different mechanisms of which cracking is among the most important ones. The damage and the fracture behavior of all its material layers as well as interfaces must be understood. In that field, the research activities aims to develop a deeper fundamental understanding of the mechanisms responsible for cracking and debonding in asphalt concrete and composite (e.g. asphalt overlays placed on PCC or thin cement concrete overlay placed on asphalt layer) pavement systems.
Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.
