Embedded Mechatronic Systems
Embedded Mechatronic Systems

Author: Abdelkhalak El Hami

Publisher: ISTE Press - Elsevier

Published: 2019-12-15

Total Pages: 274

ISBN-13: 1785481894

DOWNLOAD EBOOK

Mechatronics brings together computer science, mechanics and electronics. It enables us to improve the performances of embedded electronic systems by reducing their weight, volume, energy consumption and cost. Mechatronic equipment must operate without failure throughout ever-increasing service lives. The particularly severe conditions of use of embedded mechatronics cause failure mechanisms which are the source of breakdowns. Until now, these failure phenomena have not been looked at with enough depth to be able to be controlled. Embedded Mechatronic Systems 1, Second Edition presents two methodologies: the statistical approach to the design optimization by reliability and the experimental approach for the characterization of the development of mechatronic systems in operating mode. It also analyzes new analysis tools on the effects of thermal, vibratory, humidity, electric and electromagnetic stresses. Presents a statistical approach to the design optimization by reliability It presents an experimental approach for the characterization of the development of mechatronic systems in operating mode The book analyzes new analysis tools on the effects of thermal, vibratory, humidity, electric and electromagnetic stresses

Embedded Mechatronic Systems, Volume 2
Embedded Mechatronic Systems, Volume 2

Author: Abdelkhalak El Hami

Publisher: Elsevier

Published: 2015-07-16

Total Pages: 273

ISBN-13: 0081004699

DOWNLOAD EBOOK

In operation, mechatronics embedded systems are stressed by loads of different causes: climate (temperature, humidity), vibration, electrical and electromagnetic. These stresses in components induce failure mechanisms should be identified and modeled for better control. AUDACE is a collaborative project of the cluster Mov'eo that address issues specific to mechatronic reliability embedded systems. AUDACE means analyzing the causes of failure of components of mechatronic systems onboard. The goal of the project is to optimize the design of mechatronic devices by reliability. The project brings together public sector laboratories that have expertise in analysis and modeling of failure, major groups of mechatronics (Valeo and Thales) in the automotive and aerospace and small and medium enterprises that have skills in characterization and validation tests. - Find and develop ways to characterize and validate the design robustness and reliability of complex mechatronic devices - Develop ways to characterize physical and chemical phenomena, - Identify mechanisms of failure of components of these devices, - Analyze the physical and / or chemical mechanisms of failure, in order of importance - To model failure mechanisms and design optimization.

Embedded Mechatronic Systems, Volume 2
Embedded Mechatronic Systems, Volume 2

Author: Abdelkhalak El Hami

Publisher: ISTE Press - Elsevier

Published: 2015-07-16

Total Pages: 0

ISBN-13: 9781785480140

DOWNLOAD EBOOK

In operation, mechatronics embedded systems are stressed by loads of different causes: climate (temperature, humidity), vibration, electrical and electromagnetic. These stresses in components induce failure mechanisms should be identified and modeled for better control. AUDACE is a collaborative project of the cluster Mov'eo that address issues specific to mechatronic reliability embedded systems. AUDACE means analyzing the causes of failure of components of mechatronic systems onboard. The goal of the project is to optimize the design of mechatronic devices by reliability. The project brings together public sector laboratories that have expertise in analysis and modeling of failure, major groups of mechatronics (Valeo and Thales) in the automotive and aerospace and small and medium enterprises that have skills in characterization and validation tests.

Embedded Mechatronic Systems 2
Embedded Mechatronic Systems 2

Author: Abdelkhalak El Hami

Publisher: ISTE Press - Elsevier

Published: 2020-03-17

Total Pages: 298

ISBN-13: 1785481908

DOWNLOAD EBOOK

Embedded Mechatronic Systems 2: Analysis of Failures, Modeling, Simulation and Optimization presents advances in research within the field of mechatronic systems, which integrates reliability into the design process. Providing many detailed examples, this book develops a characterization methodology for faults in mechatronic systems. It analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms. This development of meta-models enables us to simulate effects on the reliability of conditions of use and manufacture. Provides many detailed examples Develops a characterization methodology for faults in mechatronic systems Analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms

Embedded Mechatronic Systems 2
Embedded Mechatronic Systems 2

Author: Abdelkhalak El Hami

Publisher: Elsevier

Published: 2020-02-28

Total Pages: 300

ISBN-13: 0081019564

DOWNLOAD EBOOK

Embedded Mechatronic Systems 2: Analysis of Failures, Modeling, Simulation and Optimization presents advances in research within the field of mechatronic systems, which integrates reliability into the design process. Providing many detailed examples, this book develops a characterization methodology for faults in mechatronic systems. It analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms. This development of meta-models enables us to simulate effects on the reliability of conditions of use and manufacture. - Provides many detailed examples - Develops a characterization methodology for faults in mechatronic systems - Analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms

Embedded Mechatronics System Design for Uncertain Environments
Embedded Mechatronics System Design for Uncertain Environments

Author: Cheng Siong Chin

Publisher: Institution of Engineering and Technology

Published: 2018-12-05

Total Pages: 478

ISBN-13: 1785613227

DOWNLOAD EBOOK

Industrial machines, automobiles, airplanes, robots, and machines are among the myriad possible hosts of embedded systems. The author researches robotic vehicles and remote operated vehicles (ROVs), especially Underwater Robotic Vehicles (URVs), used for a wide range of applications such as exploring oceans, monitoring environments, and supporting operations in extreme environments.

Embedded Computing and Mechatronics with the PIC32 Microcontroller
Embedded Computing and Mechatronics with the PIC32 Microcontroller

Author: Kevin Lynch

Publisher: Newnes

Published: 2015-12-08

Total Pages: 655

ISBN-13: 0124202357

DOWNLOAD EBOOK

For the first time in a single reference, this book provides the beginner with a coherent and logical introduction to the hardware and software of the PIC32, bringing together key material from the PIC32 Reference Manual, Data Sheets, XC32 C Compiler User's Guide, Assembler and Linker Guide, MIPS32 CPU manuals, and Harmony documentation. This book also trains you to use the Microchip documentation, allowing better life-long learning of the PIC32. The philosophy is to get you started quickly, but to emphasize fundamentals and to eliminate "magic steps" that prevent a deep understanding of how the software you write connects to the hardware. Applications focus on mechatronics: microcontroller-controlled electromechanical systems incorporating sensors and actuators. To support a learn-by-doing approach, you can follow the examples throughout the book using the sample code and your PIC32 development board. The exercises at the end of each chapter help you put your new skills to practice. Coverage includes: A practical introduction to the C programming language Getting up and running quickly with the PIC32 An exploration of the hardware architecture of the PIC32 and differences among PIC32 families Fundamentals of embedded computing with the PIC32, including the build process, time- and memory-efficient programming, and interrupts A peripheral reference, with extensive sample code covering digital input and output, counter/timers, PWM, analog input, input capture, watchdog timer, and communication by the parallel master port, SPI, I2C, CAN, USB, and UART An introduction to the Microchip Harmony programming framework Essential topics in mechatronics, including interfacing sensors to the PIC32, digital signal processing, theory of operation and control of brushed DC motors, motor sizing and gearing, and other actuators such as stepper motors, RC servos, and brushless DC motors For more information on the book, and to download free sample code, please visit http://www.nu32.org Extensive, freely downloadable sample code for the NU32 development board incorporating the PIC32MX795F512H microcontroller Free online instructional videos to support many of the chapters

Advances in Materials, Mechanics and Manufacturing II
Advances in Materials, Mechanics and Manufacturing II

Author: Mounir Ben Amar

Publisher: Springer Nature

Published: 2021-09-20

Total Pages: 449

ISBN-13: 3030849589

DOWNLOAD EBOOK

This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in the field of manufacturing. Chapters are based on contributions to the third International Conference on Advanced Materials Mechanics and Manufacturing, A3M2021, organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia and held online on March 25-27, 2021. They cover a variety of topics, spanning from experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. Offering a good balance of fundamental research and industrially relevant findings, they provide researchers and professionals with a timely snapshot of and extensive information on current developments in the field and a source of inspiration for future research and collaboration.

Mechatronic System Control, Logic, and Data Acquisition
Mechatronic System Control, Logic, and Data Acquisition

Author: Robert H. Bishop

Publisher: CRC Press

Published: 2017-12-19

Total Pages: 701

ISBN-13: 1420009028

DOWNLOAD EBOOK

The first comprehensive and up-to-date reference on mechatronics, Robert Bishop's The Mechatronics Handbook was quickly embraced as the gold standard in the field. With updated coverage on all aspects of mechatronics, The Mechatronics Handbook, Second Edition is now available as a two-volume set. Each installment offers focused coverage of a particular area of mechatronics, supplying a convenient and flexible source of specific information. This seminal work is still the most exhaustive, state-of-the-art treatment of the field available. Focusing on the most rapidly changing areas of mechatronics, this book discusses signals and systems control, computers, logic systems, software, and data acquisition. It begins with coverage of the role of control and the role modeling in mechatronic design, setting the stage for the more fundamental discussions on signals and systems. The volume reflects the profound impact the development of not just the computer, but the microcomputer, embedded computers, and associated information technologies and software advances. The final sections explore issues surrounding computer software and data acquisition. Covers modern aspects of control design using optimization techniques from H2 theory Discusses the roles of adaptive and nonlinear control and neural networks and fuzzy systems Includes discussions of design optimization for mechatronic systems and real-time monitoring and control Focuses on computer hardware and associated issues of logic, communication, networking, architecture, fault analysis, embedded computers, and programmable logic controllers

The Mechatronics Handbook - 2 Volume Set
The Mechatronics Handbook - 2 Volume Set

Author: Robert H. Bishop

Publisher: CRC Press

Published: 2018-10-08

Total Pages: 1416

ISBN-13: 1439833206

DOWNLOAD EBOOK

The first comprehensive reference on mechatronics, The Mechatronics Handbook was quickly embraced as the gold standard in the field. From washing machines, to coffeemakers, to cell phones, to the ubiquitous PC in almost every household, what, these days, doesn’t take advantage of mechatronics in its design and function? In the scant five years since the initial publication of the handbook, the latest generation of smart products has made this even more obvious. Too much material to cover in a single volume Originally a single-volume reference, the handbook has grown along with the field. The need for easy access to new material on rapid changes in technology, especially in computers and software, has made the single volume format unwieldy. The second edition is offered as two easily digestible books, making the material not only more accessible, but also more focused. Completely revised and updated, Robert Bishop’s seminal work is still the most exhaustive, state-of-the-art treatment of the field available.