Read and Download eBook Full
Author: Rodolfo Ambriz
Publisher: J. Ross Publishing
Published: 2011-05-15
Total Pages: 834
ISBN-13: 1604270616
DOWNLOAD EBOOKThrough the use of best practices, helpful screen shots, hands-on exercises, and review questions, this book instructs you on how to build dynamic schedules with Microsoft Project 2010 that will allow you to explore 'what if?' scenarios and decrease the time you spend making static schedule changes.
Author: Mario Vanhoucke
Publisher: Springer Science & Business Media
Published: 2013-11-29
Total Pages: 321
ISBN-13: 3642404383
DOWNLOAD EBOOKThe topic of this book is known as dynamic scheduling, and is used to refer to three dimensions of project management and scheduling: the construction of a baseline schedule and the analysis of a project schedule’s risk as preparation of the project control phase during project progress. This dynamic scheduling point of view implicitly assumes that the usability of a project’s baseline schedule is rather limited and only acts as a point of reference in the project life cycle. Consequently, a project schedule should especially be considered as nothing more than a predictive model that can be used for resource efficiency calculations, time and cost risk analyses, project tracking and performance measurement, and so on. In this book, the three dimensions of dynamic scheduling are highlighted in detail and are based on and inspired by a combination of academic research studies at Ghent University (www.ugent.be), in-company trainings at Vlerick Business School (www.vlerick.com) and consultancy projects at OR-AS (www.or-as.be). First, the construction of a project baseline schedule is a central theme throughout the various chapters of the book, and is discussed from a complexity point of view with and without the presence of project resources. Second, the creation of an awareness of the weak parts in a baseline schedule is discussed at the end of the two baseline scheduling parts as schedule risk analysis techniques that can be applied on top of the baseline schedule. Third, the baseline schedule and its risk analyses can be used as guidelines during the project control step where actual deviations can be corrected within the margins of the project’s time and cost reserves. The second edition of this book has seen corrections, additions and amendments in detail throughout the book. Moreover Chapter 15 on "Dynamic Scheduling with ProTrack" has been completely rewritten and extended with a section on "ProTrack as a research tool".
Author: Rodolfo Ambriz
Publisher: J. Ross Publishing
Published: 2008
Total Pages: 0
ISBN-13: 9781932159875
DOWNLOAD EBOOKNow fully revised and updated, this bestselling title provides practitioners a complete picture of why, when, and how to use the various new features of the 2007 version software with Service Pack 1 updates to their maximum potential and achieve the best results in real-world practice.
Author: Mario Vanhoucke
Publisher: Springer Science & Business Media
Published: 2012-02-09
Total Pages: 315
ISBN-13: 3642251757
DOWNLOAD EBOOKThe topic of this book is known as dynamic scheduling, and is used to refer to three dimensions of project management and scheduling: the construction of a baseline schedule and the analysis of a project schedule’s risk as preparation of the project control phase during project progress. This dynamic scheduling point of view implicitly assumes that the usability of a project’s baseline schedule is rather limited and only acts as a point of reference in the project life cycle. Consequently, a project schedule should especially be considered as nothing more than a predictive model that can be used for resource efficiency calculations, time and cost risk analyses, project tracking and performance measurement, and so on. In this book, the three dimensions of dynamic scheduling are highlighted in detail and are based on and inspired by a combination of academic research studies at Ghent University (www.ugent.be), in-company trainings at Vlerick Leuven Gent Management School (www.vlerick.com) and consultancy projects at OR-AS (www.or-as.be). First, the construction of a project baseline schedule is a central theme throughout the various chapters of the book, and is discussed from a complexity point of view with and without the presence of project resources. Second, the creation of an awareness of the weak parts in a baseline schedule is discussed at the end of the two baseline scheduling parts as schedule risk analysis techniques that can be applied on top of the baseline schedule. Third, the baseline schedule and its risk analyses can be used as guidelines during the project control step where actual deviations can be corrected within the margins of the project’s time and cost reserves.
Author: Rodolfo Ambriz
Publisher:
Published: 2014
Total Pages: 720
ISBN-13:
DOWNLOAD EBOOKMicrosoft Project 2013 is a powerful software tool, and like all tools it requires knowledge and skill to be used to its maximum potential. This fully revised new edition provides users with everything they will need to more easily and effectively manage projects to a successful conclusion. Designed for the busy, practicing project manager, Dynamic Scheduling With Microsoft Project 2013 will help you get up to speed quickly with the new and enhanced features of Project 2013 (including Project Pro for Office 365) and enable you to create effective schedules using best practices, tips & tricks, and step-by-step instruction. Through the use of helpful screenshots, hands-on exercises, illustrations, and review questions, this guide instructs you on how to build dynamic schedules that will allow you to explore what-if scenarios and dramatically decrease the time you spend making static schedule changes. "A must read, reread, and use daily for all project managers" is what PMI's Project Management Journal had to say about the previous edition. This updated version is even better! Key Features Fully aligned with the PMBOK Guide - Fifth Edition, The Practice Standard for Work Breakdown Structures - Second Edition, The Practice Standard for Scheduling - Second Edition, and The Practice Standard for Earned Value Management - Second Edition by the Project Management Institute Validated training material for the new Microsoft Certification Exam 74-343: Managing Projects with Microsoft Project 2013 Captures the best practices and insights that have been gained from thousands of real-life schedules and years of training project managers across all industries WAV offers downloadable exercise files, a glossary of terms, filters to check your own project, an advance topics appendix, and a solutions manual for college professors available from the Web Added Value Download Resource Center at www.jrosspub.com.
Author: Eric Uyttewaal
Publisher: J. Ross Publishing
Published: 2005
Total Pages: 0
ISBN-13: 9781932159455
DOWNLOAD EBOOKMicrosoft Office Project 2003 is a powerful software tool, and like all tools, it requires knowledge and skill to be used to its maximum potential. This fully revised new edition of Eric Uyttewaal's best-selling book on Microsoft Project provides users with everything they will need to more easily and effectively manage projects to a successful conclusion. Dynamic Scheduling with Microsoftr Office Project 2003: The Book By and For Professionals is not only written by a certified PMP and project management practitioner with over 17 years of experience using and teaching MS Project, but is also based on the cumulative experience of the author's clients, other instructors, and includes insights from numerous other professionals who have used MS Office Project successfully.
Author: Rodolfo Ambriz
Publisher: J. Ross Publishing
Published: 2014-10-21
Total Pages: 729
ISBN-13: 1604271124
DOWNLOAD EBOOK“More than a how-to book, Dynamic Scheduling® With Microsoft® Project 2013 takes you on a journey from concepts through frameworks and processes and then unleashes the power of Project 2013. Easy to use, the book lays out a solid foundation and the authors masterfully walk you through basic functionality and all the new bells and whistles. Enjoy the ride!” —Scott G. Fass, PMP, Strategy, Operations and PPM Executive Microsoft® Project 2013 is a powerful software tool, and like all tools it requires knowledge and skill to be used to its maximum potential. This fully revised new edition provides users with everything they will need to more easily and effectively manage projects to a successful conclusion. Designed for the busy, practicing project manager, Dynamic Scheduling® With Microsoft®Project 2013 will help you get up to speed quickly with the new and enhanced features of Project 2013 (including Project Pro for Office 365) and enable you to create effective schedules using best practices, tips & tricks, and step-by-step instruction. Through the use of helpful screenshots, hands-on exercises, illustrations, and review questions, this guide instructs you on how to build dynamic schedules that will allow you to explore what-if scenarios and dramatically decrease the time you spend making static schedule changes. “A must read, reread, and use daily for all project managers” is what PMI’s Project Management Journal had to say about previous editions. This updated version is even better!
Author: John L. Hennessy
Publisher: Elsevier
Published: 2006-11-03
Total Pages: 705
ISBN-13: 0080475027
DOWNLOAD EBOOKThe era of seemingly unlimited growth in processor performance is over: single chip architectures can no longer overcome the performance limitations imposed by the power they consume and the heat they generate. Today, Intel and other semiconductor firms are abandoning the single fast processor model in favor of multi-core microprocessors--chips that combine two or more processors in a single package. In the fourth edition of Computer Architecture, the authors focus on this historic shift, increasing their coverage of multiprocessors and exploring the most effective ways of achieving parallelism as the key to unlocking the power of multiple processor architectures. Additionally, the new edition has expanded and updated coverage of design topics beyond processor performance, including power, reliability, availability, and dependability. CD System Requirements PDF Viewer The CD material includes PDF documents that you can read with a PDF viewer such as Adobe, Acrobat or Adobe Reader. Recent versions of Adobe Reader for some platforms are included on the CD. HTML Browser The navigation framework on this CD is delivered in HTML and JavaScript. It is recommended that you install the latest version of your favorite HTML browser to view this CD. The content has been verified under Windows XP with the following browsers: Internet Explorer 6.0, Firefox 1.5; under Mac OS X (Panther) with the following browsers: Internet Explorer 5.2, Firefox 1.0.6, Safari 1.3; and under Mandriva Linux 2006 with the following browsers: Firefox 1.0.6, Konqueror 3.4.2, Mozilla 1.7.11. The content is designed to be viewed in a browser window that is at least 720 pixels wide. You may find the content does not display well if your display is not set to at least 1024x768 pixel resolution. Operating System This CD can be used under any operating system that includes an HTML browser and a PDF viewer. This includes Windows, Mac OS, and most Linux and Unix systems. Increased coverage on achieving parallelism with multiprocessors. Case studies of latest technology from industry including the Sun Niagara Multiprocessor, AMD Opteron, and Pentium 4. Three review appendices, included in the printed volume, review the basic and intermediate principles the main text relies upon. Eight reference appendices, collected on the CD, cover a range of topics including specific architectures, embedded systems, application specific processors--some guest authored by subject experts.
Author: C. Siva Ram Murthy
Publisher: MIT Press
Published: 2001
Total Pages: 472
ISBN-13: 9780262133760
DOWNLOAD EBOOKThis book introduces the concepts and state-of-the-art research developments of resource management in real-time systems and networks. Real-time systems and networks are of increasing importance in many applications, including automated factories, telecommunication systems, defense systems, and space systems. This book introduces the concepts and state-of-the-art research developments of resource management in real-time systems and networks. Unlike other texts in the field, it covers the entire spectrum of issues in resource management, including task scheduling in uniprocessor real-time systems; task scheduling, fault-tolerant task scheduling, and resource reclaiming in multiprocessor real-time systems; conventional task scheduling and object-based task scheduling in distributed real-time systems; message scheduling; QoS routing; dependable communication; multicast communication; and medium access protocols in real-time networks. It provides algorithmic treatments for all of the issues addressed, highlighting the intuition behind each algorithm and giving examples. The book also includes two chapters of case studies.
Author: John A. Stankovic
Publisher: Springer Science & Business Media
Published: 1998-10-31
Total Pages: 294
ISBN-13: 9780792382690
DOWNLOAD EBOOKMany real-time systems rely on static scheduling algorithms. This includes cyclic scheduling, rate monotonic scheduling and fixed schedules created by off-line scheduling techniques such as dynamic programming, heuristic search, and simulated annealing. However, for many real-time systems, static scheduling algorithms are quite restrictive and inflexible. For example, highly automated agile manufacturing, command, control and communications, and distributed real-time multimedia applications all operate over long lifetimes and in highly non-deterministic environments. Dynamic real-time scheduling algorithms are more appropriate for these systems and are used in such systems. Many of these algorithms are based on earliest deadline first (EDF) policies. There exists a wealth of literature on EDF-based scheduling with many extensions to deal with sophisticated issues such as precedence constraints, resource requirements, system overload, multi-processors, and distributed systems. Deadline Scheduling for Real-Time Systems: EDF and Related Algorithms aims at collecting a significant body of knowledge on EDF scheduling for real-time systems, but it does not try to be all-inclusive (the literature is too extensive). The book primarily presents the algorithms and associated analysis, but guidelines, rules, and implementation considerations are also discussed, especially for the more complicated situations where mathematical analysis is difficult. In general, it is very difficult to codify and taxonomize scheduling knowledge because there are many performance metrics, task characteristics, and system configurations. Also, adding to the complexity is the fact that a variety of algorithms have been designed for different combinations of these considerations. In spite of the recent advances there are still gaps in the solution space and there is a need to integrate the available solutions. For example, a list of issues to consider includes: preemptive versus non-preemptive tasks, uni-processors versus multi-processors, using EDF at dispatch time versus EDF-based planning, precedence constraints among tasks, resource constraints, periodic versus aperiodic versus sporadic tasks, scheduling during overload, fault tolerance requirements, and providing guarantees and levels of guarantees (meeting quality of service requirements). Deadline Scheduling for Real-Time Systems: EDF and Related Algorithms should be of interest to researchers, real-time system designers, and instructors and students, either as a focussed course on deadline-based scheduling for real-time systems, or, more likely, as part of a more general course on real-time computing. The book serves as an invaluable reference in this fast-moving field.
