Multi-Level Lot Sizing and Scheduling
Multi-Level Lot Sizing and Scheduling

Author: Alf Kimms

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 367

ISBN-13: 3642501621

DOWNLOAD EBOOK

This book is the outcome of my research in the field of multi levellot sizing and scheduling which started in May 1993 at the Christian-Albrechts-University of Kiel (Germany). During this time I discovered more and more interesting aspects ab out this subject and I had to learn that not every promising idea can be thoroughly evaluated by one person alone. Nevertheless, I am now in the position to present some results which are supposed to be useful for future endeavors. Since April 1995 the work was done with partial support from the research project no. Dr 170/4-1 from the "Deutsche For schungsgemeinschaft" (D FG). The remaining space in this preface shaH be dedicated to those who gave me valuable support: First, let me express my deep gratitude towards my thesis ad visor Prof. Dr. Andreas Drexl. He certainly is a very outstanding advisor. Without his steady suggestions, this work would not have come that far. Despite his scarce time capacities, he never rejected proof-reading draft versions of working papers, and he was always willing to discuss new ideas - the good as weH as the bad ones. He and Prof. Dr. Gerd Hansen refereed this thesis. I am in debted to both for their assessment. I am also owing something to Dr. Knut Haase. Since we al most never had the same opinion when discussing certain lot sizing aspects, his comments and criticism gave stimulating input.

Lotsizing and Scheduling for Production Planning
Lotsizing and Scheduling for Production Planning

Author: Knut Haase

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 127

ISBN-13: 3642457355

DOWNLOAD EBOOK

Billions of dollars are tied up in the inventories of manufacturing companies which cause large (interest) costs. A small decrease of the inventory and/or production costs without reduction of the service level can increase the profit substantially. Especially in the case of scarce capacity, efficient production schedules are fundamental for short delivery time and on-time delivery which are important competitive priorities. To support decision makers by improving their manufacturing resource planning system with appropriate methods is one of the most of production planning. interesting challenges The following chapters contain new models and new solution strategies which may be helpful for decision makers and for further research in the areas of production planning and operations research. The main subject is on lotsizing and scheduling. The objectives and further characteristics of such problems can be inferred from practical need. Thus, before an outline is given, we consider the general objectives of lotsizing and scheduling and classify the most important characteristics of such problems in the following sections.

Production Planning by Mixed Integer Programming
Production Planning by Mixed Integer Programming

Author: Yves Pochet

Publisher: Springer Science & Business Media

Published: 2006-04-19

Total Pages: 506

ISBN-13: 0387299599

DOWNLOAD EBOOK

This textbook provides a comprehensive modeling, reformulation and optimization approach for solving production planning and supply chain planning problems, covering topics from a basic introduction to planning systems, mixed integer programming (MIP) models and algorithms through the advanced description of mathematical results in polyhedral combinatorics required to solve these problems. Based on twenty years worth of research in which the authors have played a significant role, the book addresses real life industrial production planning problems (involving complex production structures with multiple production stages) using MIP modeling and reformulation approach. The book provides an introduction to MIP modeling and to planning systems, a unique collection of reformulation results, and an easy to use problem-solving library. This approach is demonstrated through a series of real life case studies, exercises and detailed illustrations. Review by Jakub Marecek (Computer Journal) The emphasis put on mixed integer rounding and mixing sets, heuristics in-built in general purpose integer programming solvers, as well as on decompositions and heuristics using integer programming should be praised... There is no doubt that this volume offers the present best introduction to integer programming formulations of lotsizing problems, encountered in production planning. (2007)

Production Planning with Capacitated Resources and Congestion
Production Planning with Capacitated Resources and Congestion

Author: Hubert Missbauer

Publisher: Springer Nature

Published: 2020-02-26

Total Pages: 289

ISBN-13: 107160354X

DOWNLOAD EBOOK

This book presents a comprehensive overview of recent developments in production planning. The monograph begins with an introductory chapter reviewing the need for these production planning models, that operate by determining time-phased releases of work into the facility or supply chain, relating these to the Manufacturing Planning and Control (MPC) and Advanced Planning and Scheduling (APS) frameworks, that form the basis of most academic research and industrial practice. The extensive body of work on Workload Control is also placed in this context, and proves the need for improved models with a discussion of the difficulties, these approaches encounter. The next two chapters present a detailed review of the state of the art in optimization models based on exogenous planned lead times, and examines the cases where these can take both integer and fractional values. The difficulties arising in estimating planned lead times are consistent with factory behavior which are highlighted, noting that many of these lead to non-convex optimization models. Attempts to address these difficulties by iterative multimodel approaches, that combine simulation and mathematical programming, are also discussed in detail. The next three chapters of the volume address the set of techniques developed using clearing functions, which represent the expected output of a resource in a planning period, as a function of the expected workload of the resource, during that period. The chapters on this subject propose a basic optimization model for multiple products, discuss the difficulties of this model and some possible solutions. It also reviews prior work, and discuss a number of alternative formulations of the clearing function concept with their respective advantages and disadvantages. Applications to lot sizing decisions and a number of other specific problems are also described. This volume concludes with an assessment of the state of the art described in the volume, and several directions for future work.

Reverse Logistics
Reverse Logistics

Author: Rommert Dekker

Publisher: Springer Science & Business Media

Published: 2013-06-05

Total Pages: 429

ISBN-13: 354024803X

DOWNLOAD EBOOK

This book addresses decision making in reverse logistics, which concerns the integration of used and obsolete products back into the supply chain as valuable resources. It covers a wide range of aspects, related to distribution, production and inventory management, and supply chain management. For each topic, it highlights key managerial issues in real-life examples and explains which quantitative models are available for addressing them. By treating a broad range of issues in a unified way, the book offers the reader a comprehensive view on the field of reverse logistics.

Logistics Systems: Design and Optimization
Logistics Systems: Design and Optimization

Author: Andre Langevin

Publisher: Springer Science & Business Media

Published: 2005-12-06

Total Pages: 401

ISBN-13: 038724977X

DOWNLOAD EBOOK

In a context of global competition, the optimization of logistics systems is inescapable. Logistics Systems: Design and Optimization falls within this perspective and presents twelve chapters that well illustrate the variety and the complexity of logistics activities. Each chapter is written by recognized researchers who have been commissioned to survey a specific topic or emerging area of logistics. The first chapter, by Riopel, Langevin, and Campbell, develops a framework for the entire book. It classifies logistics decisions and highlights the relevant linkages to logistics decisions. The intricacy of these linkages demonstrates how thoroughly the decisions are interrelated and underscores the complexity of managing logistics activities. Each of the chapters focus on quantitative methods for the design and optimization of logistics systems.

Inventory and Production Management in Supply Chains
Inventory and Production Management in Supply Chains

Author: Edward A. Silver

Publisher: CRC Press

Published: 2016-12-19

Total Pages: 810

ISBN-13: 1466558628

DOWNLOAD EBOOK

Authored by a team of experts, the new edition of this bestseller presents practical techniques for managing inventory and production throughout supply chains. It covers the current context of inventory and production management, replenishment systems for managing individual inventories within a firm, managing inventory in multiple locations and firms, and production management. The book presents sophisticated concepts and solutions with an eye towards today’s economy of global demand, cost-saving, and rapid cycles. It explains how to decrease working capital and how to deal with coordinating chains across boundaries.

Deterministic Lotsizing Models for Production Planning
Deterministic Lotsizing Models for Production Planning

Author: Marc Salomon

Publisher: Springer Science & Business Media

Published: 2013-11-11

Total Pages: 162

ISBN-13: 3642516491

DOWNLOAD EBOOK

This thesis deals with timing and sizing decisions for production lots, and more precisely, with mathematical models to support optimal tim ing and sizing decisions. These models are called lotsizing models. They are characterized by the fact that production lots are determined based on a trade-offbetween production costs and customer service. Production costs can be categorized as basic production costs, which consist of material costs, labour costs, machine startup costs and over head costs, and inventory related costs, which include costs of capital tied up in inventory, insurances and taxes. Customer service is the capability of the firm to deliver to their clients the products in the quantity they ordered at the agreed upon time and place. The costs of realizing a certain service level are usuaIly very dif ficult to convert into money. They include costs of expediting, loss of customer goodwill, and loss of sales revenues resulting from the short age situation.

Supply Chain Optimization, Management and Integration: Emerging Applications
Supply Chain Optimization, Management and Integration: Emerging Applications

Author: Wang, John

Publisher: IGI Global

Published: 2010-11-30

Total Pages: 418

ISBN-13: 1609601378

DOWNLOAD EBOOK

Our rapidly changing world has forced business practitioners, in corporation with academic researchers, to respond quickly and develop effective solution methodologies and techniques to handle new challenges in supply chain systems. Supply Chain Optimization, Management and Integration: Emerging Applications presents readers with a rich collection of ideas from researchers who are bridging the gap between the latest in information technology and supply chain management. This book includes theoretical, analytical, and empirical research, comprehensive reviews of relevant research, and case studies of effective applications in the field of SCM. The use of new technologies, methods, and techniques are emphasized by those who have worked with supply chain management across the world for those in the field of information systems.

Stochastic Dynamic Lot-Sizing in Supply Chains
Stochastic Dynamic Lot-Sizing in Supply Chains

Author: Timo Jannis Hilger

Publisher: BoD – Books on Demand

Published: 2015-10-01

Total Pages: 230

ISBN-13: 3738626972

DOWNLOAD EBOOK

Companies frequently operate in an uncertain environment and many real life production planning problems imply volatility and stochastics of the customer demands. Thereby, the determination of the lot-sizes and the production periods significantly affects the profitability of a manufacturing company and the service offered to the customers. This thesis provides practice-oriented formulations and variants of dynamic lot-sizing problems in presence of restricted production resources and demand uncertainty. The demand fulfillment is regulated by service level constraints. Additionally, integrated production and remanufacturing planning under demand and return uncertainty in closed-loop supply chains is addressed. This book offers introductions to these problems and presents approximation models that can be applied under uncertainty. Comprehensive numerical studies provide managerial implications. The book is written for practitioners interested in supply chain management and production as well as for lecturers and students in business studies with a focus on supply chain management and operations management.