Design of High Frequency Integrated Analogue Filters
Design of High Frequency Integrated Analogue Filters

Author: Yichuang Sun

Publisher: IET

Published: 2002-04-15

Total Pages: 258

ISBN-13: 0852969767

DOWNLOAD EBOOK

Sun (communication electronics, U. of Hertfordshire, UK), this volume's editor, also contributed a chapter on the architectures and design of OTA/gm-C filters. The other papers describe on-chip automatic tuning of filters, analog adaptive filters, low voltage techniques for switched-current filters, log domain filters, the MOSFET-C technique and active filters using integrated inductors. The contributors teach electrical engineering in the US, the UK, Thailand, and Canada. Annotation copyrighted by Book News, Inc., Portland, OR

Wireless Communications Circuits and Systems
Wireless Communications Circuits and Systems

Author: Institution of Electrical Engineers

Publisher: IET

Published: 2004

Total Pages: 304

ISBN-13: 0852964439

DOWNLOAD EBOOK

This book examines integrated circuits, systems and transceivers for wireless and mobile communications. It covers the most recent developments in key RF, IF, analogue, mixed-signal components and single-chip transceivers in CMOS technology.

CMOS Analog Design Using All-Region MOSFET Modeling
CMOS Analog Design Using All-Region MOSFET Modeling

Author: Márcio Cherem Schneider

Publisher: Cambridge University Press

Published: 2010-01-28

Total Pages: 505

ISBN-13: 1139483692

DOWNLOAD EBOOK

Covering the essentials of analog circuit design, this book takes a unique design approach based on a MOSFET model valid for all operating regions, rather than the standard square-law model. Opening chapters focus on device modeling, integrated circuit technology, and layout, whilst later chapters go on to cover noise and mismatch, and analysis and design of the basic building blocks of analog circuits, such as current mirrors, voltage references, voltage amplifiers, and operational amplifiers. An introduction to continuous-time filters is also provided, as are the basic principles of sampled-data circuits, especially switched-capacitor circuits. The final chapter then reviews MOSFET models and describes techniques to extract design parameters. With numerous design examples and exercises also included, this is ideal for students taking analog CMOS design courses and also for circuit designers who need to shorten the design cycle.

High Frequency Continuous Time Filters in Digital CMOS Processes
High Frequency Continuous Time Filters in Digital CMOS Processes

Author: Shanthi Pavan

Publisher: Springer Science & Business Media

Published: 2007-05-08

Total Pages: 228

ISBN-13: 0306470144

DOWNLOAD EBOOK

There is an ever increasing trend towards putting entire systems on a single chip. This means that analog circuits will have to coexist on the same substrate along with massive digital systems. Since technologies are optimized with these digital systems in mind, designers will have to make do with standard CMOS processes in the years to come. We address analog filter design from this perspective. Filters form important blocks in applications ranging from computer disc-drive chips to radio transceivers. In this book, we develop the theory and techniques necessary for the implementation of high frequency (hundreds of megahertz) programmable continuous time filters in standard CMOS processes. Since high density poly-poly capacitors are not available in these technologies, alternative capacitor structures have to be found. Met- metal capacitors have low specific capacitance. An alternative is to use the (inherently nonlinear) capacitance formed by MOSFET gates. In Chapter 2, we focus on the use of MOS capacitors as integrating elements. A physics-based model which predicts distortion accurately is presented for a two-terminal MOS structure in accumulation. Distortion in these capacitors as a function of signal swing and bias voltage is computed. Chapter 3 reviews continuous-time filter architectures in the light of bias-dependent integrating capacitors. We also discuss the merits and demerits of various CMOS transconductance elements. The problems encountered in designing high frequency programmable filters are discussed in detail.

Design of Very High-Frequency Multirate Switched-Capacitor Circuits
Design of Very High-Frequency Multirate Switched-Capacitor Circuits

Author: Ben U Seng Pan

Publisher: Springer Science & Business Media

Published: 2006-07-02

Total Pages: 250

ISBN-13: 0387261222

DOWNLOAD EBOOK

Design of Very High-Frequency Multirate Switched-Capacitor Circuits presents the theory and the corresponding CMOS implementation of the novel multirate sampled-data analog interpolation technique which has its great potential on very high-frequency analog frond-end filtering due to its inherent dual advantage of reducing the speed of data-converters and DSP core together with the specification relaxation of the post continuous-time filtering. This technique completely eliminates the traditional phenomenon of sampled-and-hold frequency-shaping at the lower input sampling rate. Also, in order to tackle physical IC imperfections at very high frequency, the state-of-the-art circuit design and layout techniques for high-speed Switched-Capacitor (SC) circuits are comprehensively discussed: -Optimum circuit architecture tradeoff analysis -Simple speed and power trade-off analysis of active elements -High-order filtering response accuracy with respect to capacitor-ratio mismatches -Time-interleaved effect with respect to gain and offset mismatch -Time-interleaved effect with respect to timing-skew and random jitter with non-uniformly holding -Stage noise analysis and allocation scheme -Substrate and supply noise reduction -Gain-and offset-compensation techniques -High-bandwidth low-power amplifier design and layout -Very low timing-skew multiphase generation Two tailor-made optimum design examples in CMOS are presented. The first one achieves a 3-stage 8-fold SC interpolating filter with 5.5MHz bandwidth and 108MHz output sampling rate for a NTSC/PAL CCIR 601 digital video at 3 V. Another is a 15-tap 57MHz SC FIR bandpass interpolating filter with 4-fold sampling rate increase to 320MHz and the first-time embedded frequency band up-translation for DDFS system at 2.5V. The corresponding chip prototype achieves so far the highest operating frequency, highest filter order and highest center frequency with highest dynamic range under the lowest supply voltage when compared to the previously reported high-frequency SC filters in CMOS.

Test and Diagnosis of Analogue, Mixed-signal and RF Integrated Circuits
Test and Diagnosis of Analogue, Mixed-signal and RF Integrated Circuits

Author: Yichuang Sun

Publisher: IET

Published: 2008-05-30

Total Pages: 411

ISBN-13: 0863417450

DOWNLOAD EBOOK

This book provides a comprehensive discussion of automatic testing, diagnosis and tuning of analogue, mixed-signal and RF integrated circuits, and systems in a single source. As well as fundamental concepts and techniques, the book reports systematically the state of the arts and future research directions of those areas. A complete range of circuit components are covered and test issues from the SoC perspective. An essential reference for researchers and engineers in mixed signal testing, postgraduate and senior undergraduate students.

Analog Filters using MATLAB
Analog Filters using MATLAB

Author: Lars Wanhammar

Publisher: Springer Science & Business Media

Published: 2009-06-02

Total Pages: 325

ISBN-13: 0387927670

DOWNLOAD EBOOK

This textbook provides a complete introduction to analog filters for senior undergraduate and graduate students. Coverage includes the synthesis of analog filters and many other filter types including passive filters and filters with distributed elements.

Analog CMOS Filters for Very High Frequencies
Analog CMOS Filters for Very High Frequencies

Author: Bram Nauta

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 239

ISBN-13: 1461535808

DOWNLOAD EBOOK

Integrated circuit technology is widely used for the full integration of electronic systems. In general, these systems are realized using digital techniques implemented in CMOS technology. The low power dissipation, high packing density, high noise immunity, ease of design and the relative ease of scaling are the driving forces of CMOS technology for digital applications. Parts of these systems cannot be implemented in the digital domain and will remain analog. In order to achieve complete system integration these analog functions are preferably integrated in the same CMOS technology. An important class of analog circuits that need to be integrated in CMOS are analog filters. This book deals with very high frequency (VHF) filters, which are filters with cut-off frequencies ranging from the low megahertz range to several hundreds of megahertz. Until recently the maximal cut-off frequencies of CMOS filters were limited to the low megahertz range. By applying the techniques presented in this book the limit could be pushed into the true VHF domain, and integrated VHF filters become feasible. Application of these VHF filters can be found in the field of communication, instrumentation and control systems. For example, pre and post filtering for high-speed AD and DA converters, signal reconstruction, signal decoding, etc. The general design philosophy used in this book is to allow only the absolute minimum of signal carrying nodes throughout the whole filter. This strategy starts at the filter synthesis level and is extended to the level of electronic circuitry. The result is a filter realization in which all capacitators (including parasitics) have a desired function. The advantage of this technique is that high frequency parasitic effects (parasitic poles/zeros) are minimally present. The book is a reference for engineers in research or development, and is suitable for use as a text for advanced courses on the subject. >

Continuous-Time Active Filter Design
Continuous-Time Active Filter Design

Author: T. Deliyannis

Publisher: CRC Press

Published: 2019-05-08

Total Pages: 352

ISBN-13: 1351833804

DOWNLOAD EBOOK

This book presents the design of active RC filters in continuous time. Topics include: filter fundamentals active elements realization of functions using opamps LC ladder filters operational transconductance amplifier circuits (OTACs) MOSFET-C filters Continuous-Time Active Filter Design uses wave variables to enable the reader to better understand the introduction of more complex variables created through linear transformations of voltages and currents. Intended for undergraduate students in electrical engineering, Continuous-Time Active Filter Design provides chapters as self-contained units, including introductory material leading to active RC filters.

Textbook of Operational Transconductance Amplifier and Analog Integrated Circuits
Textbook of Operational Transconductance Amplifier and Analog Integrated Circuits

Author: Tahira Parveen

Publisher: I. K. International Pvt Ltd

Published: 2013-12-30

Total Pages: 292

ISBN-13: 9380026552

DOWNLOAD EBOOK

This book covers a detailed study of Operational Transconductance Amplifier (OTA) based circuits, their realizations and applications. The book is primarily concerned with the building blocks and their applications in linear and nonlinear circuit design, presented in a simplified and methodical way. The book comprises nine chapters, covers important building blocks, ideal and non-ideal component simulators.