Computer-aided design is at the forefront of the patternmaking business today. Computer Aided Design Using Gerber Technology provides clear, step-by-step instructions for AccuMark Explorer, Silhouette/Pattern Design System, and Marker Making-everything necessary to aid the designer in the creation of a garment from conception to output, Appropriate for new students as well as design professionals who need a technological refresher course.
The tools and techniques you need to break the analog design bottleneck! Ten years ago, analog seemed to be a dead-end technology. Today, System-on-Chip (SoC) designs are increasingly mixed-signal designs. With the advent of application-specific integrated circuits (ASIC) technologies that can integrate both analog and digital functions on a single chip, analog has become more crucial than ever to the design process. Today, designers are moving beyond hand-crafted, one-transistor-at-a-time methods. They are using new circuit and physical synthesis tools to design practical analog circuits; new modeling and analysis tools to allow rapid exploration of system level alternatives; and new simulation tools to provide accurate answers for analog circuit behaviors and interactions that were considered impossible to handle only a few years ago. To give circuit designers and CAD professionals a better understanding of the history and the current state of the art in the field, this volume collects in one place the essential set of analog CAD papers that form the foundation of today's new analog design automation tools. Areas covered are: * Analog synthesis * Symbolic analysis * Analog layout * Analog modeling and analysis * Specialized analog simulation * Circuit centering and yield optimization * Circuit testing Computer-Aided Design of Analog Integrated Circuits and Systems is the cutting-edge reference that will be an invaluable resource for every semiconductor circuit designer and CAD professional who hopes to break the analog design bottleneck.
Computer-aided Design Techniques deals with the tools used in computer-aided design, problems associated with software development for design, and techniques applied in the development of the REDAC system. The book covers topics such as program design, requirements of a program for general use, and representation of the circuit in a computer; device modeling, general linear modeling, and linear and non-linear transistor modeling; and non-linear transient analysis. Also covered are topics such as layout capacitances and inductances computation; the use of graphic display as a drawing aid for circuit layout; and the writing of design programs. The text is recommended for engineers and physicists who would like to know how computers can aid them in design, as well as computer experts who aim to write programs intended for design.
Micro and nanoelectronic devices are the prime movers for electronics, which is essential for the current information age. This unique monograph identifies the key stages of advanced device design and integration in semiconductor manufacturing. It brings into one resource a comprehensive device design using simulation. The book presents state-of-the-art semiconductor device design using the latest TCAD tools.Professionals, researchers, academics, and graduate students in electrical & electronic engineering and microelectronics will benefit from this reference text.
Computer-Aided Design and Manufacturing (CAD/CAM) is concerned with all aspects of the process of designing, prototyping, manufacturing, inspecting, and maintaining complex geometric objects under computer control. As such, there is a natural synergy between this field and Computational Geometry (CG), which involves the design, analysis, implementation, and testing of efficient algorithms and data representation techniques for geometric entities such as points, polygons, polyhedra, curves, and surfaces. The DIMACS Center (Piscataway, NJ) sponsored a workshop to further promote the interaction between these two fields. Attendees from academia, research laboratories, and industry took part in the invited talks, contributed presentations, and informal discussions. This volume is an outgrowth of that meeting.
This volume of The Circuits and Filters Handbook, Third Edition focuses on computer aided design and design automation. In the first part of the book, international contributors address topics such as the modeling of circuit performances, symbolic analysis methods, numerical analysis methods, design by optimization, statistical design optimization, and physical design automation. In the second half of the text, they turn their attention to RF CAD, high performance simulation, formal verification, RTK behavioral synthesis, system-level design, an Internet-based micro-electronic design automation framework, performance modeling, and embedded computing systems design.
This might be the first book that deals mostly with the 3D technology computer-aided design (TCAD) simulations of major state-of-the-art stress- and strain-engineered advanced semiconductor devices: MOSFETs, BJTs, HBTs, nonclassical MOS devices, finFETs, silicon-germanium hetero-FETs, solar cells, power devices, and memory devices. The book focuses on how to set up 3D TCAD simulation tools, from mask layout to process and device simulation, including design for manufacturing (DFM), and from device modeling to SPICE parameter extraction. The book also offers an innovative and new approach to teaching the fundamentals of semiconductor process and device design using advanced TCAD simulations of various semiconductor structures. The simulation examples chosen are from the most popular devices in use today and provide useful technology and device physics insights. To extend the role of TCAD in today’s advanced technology era, process compact modeling and DFM issues have been included for design–technology interface generation. Unique in approach, this book provides an integrated view of silicon technology and beyond—with emphasis on TCAD simulations. It is the first book to provide a web-based online laboratory for semiconductor device characterization and SPICE parameter extraction. It describes not only the manufacturing practice associated with the technologies used but also the underlying scientific basis for those technologies. Written from an engineering standpoint, this book provides the process design and simulation background needed to understand new and future technology development, process modeling, and design of nanoscale transistors. The book also advances the understanding and knowledge of modern IC design via TCAD, improves the quality in micro- and nanoelectronics R&D, and supports the training of semiconductor specialists. It is intended as a textbook or reference for graduate students in the field of semiconductor fabrication and as a reference for engineers involved in VLSI technology development who have to solve device and process problems. CAD specialists will also find this book useful since it discusses the organization of the simulation system, in addition to presenting many case studies where the user applies TCAD tools in different situations.
Computer Aided Design of Multivariable Technological Systems covers the proceedings of the Second International Federation of Automatic Control (IFAC). The book reviews papers that discuss topics about the use of Computer Aided Design (CAD) in designing multivariable system, such as theoretical issues, applications, and implementations. The book tackles several topics relevant to the use of CAD in designing multivariable systems. Topics include quasi-classical approach to multivariable feedback system designs; fuzzy control for multivariable systems; root loci with multiple gain parameters; multivariable frequency domain stability criteria; and computational algorithms for pole assignment in linear multivariable systems. The text will be of great use to professionals whose work involves designing and implementing multivariable systems.
Describes facets of CAD/CAM. Illustrates how each is tied together in an integrated system. Serves as a text for college-level courses in mechanical or manufacturing engineering; for professional in-house training programs & seminars.
