Good engineers never stop looking for opportunities to improve the performance of their production systems. Performance enhancement methods are always carefully examined, and production data is analyzed in order to identify determining factors affecting performance.The two main activities of the production engineer in the petroleum and related industries are reservoir stimulation and artificial lift. The classic solution to maximizing a well's productivity is to stimulate it. The basis for selecting stimulation candidates should be a review of the well's actual and theoretical IPR. Low permeability wells often need fracturing on initial completion. In low permeability zones, additional post stimulation production can be significant to the economics, however, the production engineer needs to make management aware of the true long term potential or else overly optimistic projections can easily be made.The main purpose of stimulation is to enhance the property value by the faster delivery of the petroleum fluid and/or to increase ultimate economic recovery. The aim of reservoir stimulation is to bypass near-wellbore damage and return a well to its “natural” productivity / injectivity, to extend a conductive path deep into a formation and thus increase productivity beyond the natural level and to produce hydrocarbon from tight formation.The importance of reservoir stimulation is increasing due to following reasons: • Hydrocarbon fields in their mid-life• Production in these fields are in declining trend• The thrust area: Enhancement of productionHence, to improve productivity of the well matrix stimulation and hydraulic fracturing are intended to remedy, or even improve, the natural connection of the wellbore with the reservoir, which could delay the need for artificial lift.This book presents procedures taken in the Oil & Gas Industry for identifying well problems, and it suggests means of solving problems with the help of the Coil Tube unit which is used for improving well productivity and techniques like Acidizing and Hydraulic Fracturing.
Well Control for Completions and Interventions explores the standards that ensure safe and efficient production flow, well integrity and well control for oil rigs, focusing on the post-Macondo environment where tighter regulations and new standards are in place worldwide. Too many training facilities currently focus only on the drilling side of the well's cycle when teaching well control, hence the need for this informative guide on the topic. This long-awaited manual for engineers and managers involved in the well completion and intervention side of a well's life covers the fundamentals of design, equipment and completion fluids. In addition, the book covers more important and distinguishing components, such as well barriers and integrity envelopes, well kill methods specific to well completion, and other forms of operations that involve completion, like pumping and stimulation (including hydraulic fracturing and shale), coiled tubing, wireline, and subsea intervention. - Provides a training guide focused on well completion and intervention - Includes coverage of subsea and fracturing operations - Presents proper well kill procedures - Allows readers to quickly get up-to-speed on today's regulations post-Macondo for well integrity, barrier management and other critical operation components
This book is a compilation of selected papers from the 10th International Field Exploration and Development Conference (IFEDC 2020). The proceedings focuses on Reservoir Surveillance and Management, Reservoir Evaluation and Dynamic Description, Reservoir Production Stimulation and EOR, Ultra-Tight Reservoir, Unconventional Oil and Gas Resources Technology, Oil and Gas Well Production Testing, Geomechanics. The conference not only provides a platform to exchanges experience, but also promotes the development of scientific research in oil & gas exploration and production. The main audience for the work includes reservoir engineer, geological engineer, enterprise managers senior engineers as well as professional students.
Abrasive Water Jet Perforation and Multi-Stage Fracturing gives petroleum engineers, well completion managers and fracturing specialists a critical guide to understanding all the details of the technology including materials, tools, design methods and field applications. The exploitation and development of unconventional oil and gas resources has continued to gain importance, and multi-stage fracturing with abrasive water jets has emerged as one of the top three principal methods to recover unconventional oil and gas, yet there is no one collective reference to explain the fundamentals, operations and influence this method can deliver. The book introduces current challenges and gives solutions for the problems encountered. Packed with references and real-world examples, the book equips engineers and specialists with a necessary reservoir stimulation tool to better understand today's fracturing technology. - Provides understanding of the fundamentals, design and application of water jet perforation - Examines the pressure boosting assembly in all phases including initiation, hydraulic isolation and production stage - Evaluates production analysis, pump pressure predictions and the latest design software - Introduces current challenges and gives solutions for the problems encountered
This book is an introductory reference guide to coiled tubing techniques in the oil and gas field. The book examines the common techniques of coiled tubing operations in the oil field. The author introduces the reader to the tools, equipment, and application methods of coiled tubing. It also talks about the safety precautions one must take during the process. This work may appeal to readers who are interested in oil and gas field techniques.
This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.
Unpredictable, unwanted, and costly, oil and gas well fishing is not a typical practice for drilling, workover and completion projects, but roughly one in every five wells experience this intervention. To stay on top, The Guide to Oilwell Fishing Operations, Second Edition will keep fishing tool product managers, drilling managers and all other well intervention specialists keyed in to all the latest tools, techniques and rules of thumb critical to conventional and complex wellbore projects, such as extended reach horizontal wells, thru-tubing, and coiled tubing operations. Strengthened with updated material and a new chapter on wellbore cleaning, The Guide to Oilwell Fishing Operations, Second Edition ensures that the life of the well will be saved no matter the unforeseen circumstances. Crucial aspects include: - Enhancements with updated equipment, technology, and a new chapter on wellbore cleaning methods - Additional input from worldwide service companies, providing a more comprehensive balance - Remains the only all-inclusive guide exclusively devoted to fishing tools, techniques, and rules of thumb - Remodeled with latest jars on the market, catch tools, and retrieving stuck packers with cutting technology - Improved with information on methods such as sidetracking and plug-and-abandon operations - Modernized with approaches and tactics on more advanced well projects such as high-angle deviated and horizontal wells and expandable casing technology to repair casing failure and leaks
Offshore Operation Facilities: Equipment and Procedures provides new engineers with the knowledge and methods that will assist them in maximizing efficiency while minimizing cost and helps them prepare for the many operational variables involved in offshore operations. This book clearly presents the working knowledge of subsea operations and demonstrates how to optimize operations offshore. The first half of the book covers the fundamental principles governing offshore engineering structural design, as well as drilling operations, procedures, and equipment. The second part includes common challenges of deep water oil and gas engineering as well as beach (shallow) oil engineering, submarine pipeline engineering, cable engineering, and safety system engineering. Many examples are included from various offshore locations, with special focus on offshore China operations. In the offshore petroleum engineering industry, the ability to maintain a profitable business depends on the efficiency and reliability of the structure, the equipment, and the engineer. Offshore Operation Facilities: Equipment and Procedures assists engineers in meeting consumer demand while maintaining a profitable operation. Comprehensive guide to the latest technology, strategies, and best practices for offshore operations Step-by-step approach for dealing with common challenges such as deepwater and shallow waters Includes submarine pipeline, cable engineering, and safety system engineering Unique examples from various offshore locations around the world, with special focus on offshore China
