On-the-Job Cisco IP Routing Solutions! Packed with network-tested troubleshooting techniques, advanced configuration solutions, and inside tips on how to avoid common pitfalls, this all-fact, no-fluff reference shows you step-by-step how to tackle real-world IP routing challenges. There's no theory, no tutorials -- just the nuts-and-bolts information you need to solve the problem at hand, compiled by three Cisco-certified professionals who've seen it all.
"Cisco OSPF Command and Configuration Handbook is a clear, concise, and complete source of documentation for all Cisco IOS Software OSPF commands. The way you use this book will depend on your objectives. If you are preparing for the CCIE written and lab exams, then this book can be used as a laboratory guide to learn the purpose and proper use of every OSPF command. If you are a network designer, then this book can be used as a ready reference for any OSPF command. Author Bill Parkhurst provides concise snapshots of every command with regard to command purpose, usage, syntax explanation, initial introduction in Cisco IOS Software, and cross references to related commands also covered in the book. This book covers many OSPF topic areas, including interface configuration, OSPF area configuration, route filtering, OSPF process configuration, route cost, default route generation, redistribution, administrative distance, OSPF neighbor relationships, route summarization, and show, debug, and clear commands"--Resource description page.
This reference guide to the commands contained with BGP-4 explains the intended use and function and how to properly configure each command. Scenarios are presented to demonstrate every facet of the command and its use.
Fast answers and reliable solutions for all widely-used Cisco router features - all in one time-saving guide Organized for maximum efficiency: describes actual commands and options in the sequence they should be used Helps network pros eliminate time-consuming documentation searches Extensive updates: IPv6, MPLS, AutoQoS, SIP, MGCP, voice troubleshooting, VPNs, security, and more "At-a-glance" illustrations offer fast answers and easy double-checking Locating reliable Cisco router configuration command information can require extensive, time-consuming research. Cisco Router Configuration Handbook, 2/e, is the solution: a day-to-day reference to the most widely used Cisco router features and configurations. Straight from Cisco experts, it covers every facet of router configuration, including fundamentals, network protocols, packet processing, voice/telephony, security, and more. This book is organized for maximum efficiency. Related features are covered together, and features and options are covered in the sequence in which they are typically used. Shaded tabs mark each section for quick reference. Information on each feature, technology, or protocol is presented in a concise one- or two-page format, with sections presenting quick facts, configuration information, and step-by-step examples, including both required and optional commands. Simply put, this book brings together all the Cisco routing configuration information most network professionals will ever need - and organizes it more efficiently than any other resource.
An Essential Guide to Understanding and Implementing IP Routing Protocols Cisco''s authoritative single-source guide to IP routing protocols for enterprise and service provider environments Service providers and large enterprises are converging on a common IP infrastructure that supports rapid deployment of high-value services. Demand is soaring for highly skilled IP network engineers who can implement and run these infrastructures. Now, one source combines reliable knowledge about contemporary IP routing protocols and expert hands-on guidance for using them with Cisco IOS, IOS XE, and IOS XR operating systems. After concisely reviewing the basics, three Cisco experts fully explain static routing, EIGRP, OSPF, IS-IS, and BGP routing protocols. Next, they introduce advanced routing with policies and redistribution, sophisticated BGP-based traffic engineering, and multicast. They present comprehensive coverage of IPv6, from its multicast implementation to its completely revamped address structure. Finally, they discuss advanced high availability techniques, including fast routing convergence. IP Routing on Cisco IOS, IOS XE, and IOS XR presents each protocol conceptually, with intuitive illustrations, realistic configurations, and appropriate output. To help IOS users master IOS XE and IOS XR, differences in operating systems are explicitly identified, and side-by-side feature command references are presented. All content fully aligns with Learning@Cisco, providing efficient self-study for multiple Cisco Career Certifications, including CCNA®/CCNP®/CCIE® Service Provider, CCIE Routing & Switching, Cisco IOS XR Specialist Certification, and the routing components of several additional Cisco Certifications. Brad Edgeworth, CCIE No. 31574 (R&S & SP) has been with Cisco since 2011 as Systems Engineer and Technical Leader. Formerly a network architect and consultant for various Fortune® 500 companies, his 18 years of IT experience includes extensive architectural and operational work in enterprise and service provider environments. He is a Cisco Live distinguished speaker presenting on IOS XR. Aaron Foss, CCIE No. 18761 (R&S & SP), a High Touch Engineer with the Cisco Focused Technical Support (FTS) organization, works with large service providers to troubleshoot MPLS, QoS, and IP routing issues. He has more than 15 years of experience designing, deploying, and troubleshooting IP networks. Ramiro Garza Rios, CCIE No. 15469 (R&S, SP, and Security), Senior Network Consulting Engineer with Cisco Advanced Services, plans, designs, implements, and optimizes next-generation service provider networks. Before joining Cisco in 2005, he was Network Consulting and Presales Engineer for a Cisco Gold Partner in Mexico, where he planned and deployed both enterprise and service provider networks. Foreword by Norm Dunn, Senior Product Manager, Learning@Cisco Global Product Management, Service Provider Portfolio Understand how IOS®, IOS XE, and IOS XR operating systems compare Master IPv4 concepts, addressing structure, and subnetting Learn how routers and routing protocols work, and how connected networks and static routes behave from the router''s perspective Work with EIGRP and distance vector routing Deploy basic and advanced OSPF, including powerful techniques for organizing routing domains, path selection, and optimization Compare IS-IS with OSPF, and implement advanced IS-IS multilevel routing, optimization, and path selection Make the most of BGP and route manipulation, including IOS/IOS XE route maps and IOS XR''s highly scalable Route Policy Language Use advanced policy-based route manipulation and filtering Implement route redistribution: rules, potential problems, and solutions Leverage BGP communities, summaries, and other router conservation techniques Discover how IPv6 changes IP address and command structure Establish highly efficient multicast routing in IPv4 and IPv6 environments Systematically improve network availability and operational uptime through event driven detection and fast routing convergence
Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) Foundation Learning Guide is a Cisco authorized, self-paced learning tool for CCNP preparation. This book educates network professionals on how to maintain and monitor network performance, troubleshoot multi protocol system networks, and troubleshoot Cisco device hardening issues.
This book is a concise one-stop desk reference and synopsis of basic knowledge and skills for Cisco certification prep. For beginning and experienced network engineers tasked with building LAN, WAN, and data center connections, this book lays out clear directions for installing, configuring, and troubleshooting networks with Cisco devices. The full range of certification topics is covered, including all aspects of IOS, NX-OS, and ASA software. The emphasis throughout is on solving the real-world challenges engineers face in configuring network devices, rather than on exhaustive descriptions of hardware features. This practical desk companion doubles as a comprehensive overview of the basic knowledge and skills needed by CCENT, CCNA, and CCNP exam takers. It distills a comprehensive library of cheat sheets, lab configurations, and advanced commands that the authors assembled as senior network engineers for the benefit of junior engineers they train, mentor on the job, and prepare for Cisco certification exams. Prior familiarity with Cisco routing and switching is desirable but not necessary, as Chris Carthern, Dr. Will Wilson, Noel Rivera, and Richard Bedwell start their book with a review of the basics of configuring routers and switches. All the more advanced chapters have labs and exercises to reinforce the concepts learned. This book differentiates itself from other Cisco books on the market by approaching network security from a hacker’s perspective. Not only does it provide network security recommendations but it teaches you how to use black-hat tools such as oclHashcat, Loki, Burp Suite, Scapy, Metasploit, and Kali to actually test the security concepts learned. Readers of Cisco Networks will learn How to configure Cisco switches, routers, and data center devices in typical corporate network architectures The skills and knowledge needed to pass Cisco CCENT, CCNA, and CCNP certification exams How to set up and configure at-home labs using virtual machines and lab exercises in the book to practice advanced Cisco commands How to implement networks of Cisco devices supporting WAN, LAN, and data center configurations How to implement secure network configurations and configure the Cisco ASA firewall How to use black-hat tools and network penetration techniques to test the security of your network
Implementing Cisco IP Routing (ROUTE) Foundation Learning Guide is a Cisco® authorized learning tool for CCNP®/CCDP®/CCIP® preparation. As part of the Cisco Press Foundation Learning Series, this book teaches you how to plan, configure, maintain, and scale a routed network. It focuses on using Cisco routers connected in LANs and WANs typically found at medium-to-large network sites. After completing this book, you will be able to select and implement the appropriate Cisco IOS services required to build a scalable, routed network. Each chapter opens with the list of topics covered to clearly identify the focus of that chapter. At the end of each chapter, a summary of key concepts for quick study and review questions provide you with an opportunity to assess and reinforce your understanding of the material. Throughout the book there are many configuration examples and sample verification outputs demonstrating troubleshooting techniques and illustrating critical issues surrounding network operation. Implementing Cisco IP Routing (ROUTE) Foundation Learning Guide is ideal for certification candidates who are seeking a tool to learn all the topics covered in the ROUTE 642-902 exam. Serves as the official book for the Cisco Networking Academy CCNP ROUTE course Includes all the content from the e-Learning portion of the Learning@ Cisco ROUTE course Provides a thorough presentation of complex enterprise network frameworks, architectures, and models, and the process of creating, documenting, and executing an implementation plan Details Internet Protocol (IP) routing protocol principles Explores Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First (OSPF), and Border Gateway Protocol (BGP) Examines how to manipulate routing updates and control the information passed between them Covers routing facilities for branch offices and mobile workers Investigates IP Version 6 (IPv6) in detail Presents self-assessment review questions, chapter objectives, and summaries to facilitate effective studying This book is in the Foundation Learning Guide Series. These guides are developed together with Cisco® as the only authorized, self-paced learning tools that help networking professionals build their understanding of networking concepts and prepare for Cisco certification exams.
Routing Protocols and Concepts CCNA Exploration Companion Guide Routing Protocols and Concepts, CCNA Exploration Companion Guide is the official supplemental textbook for the Routing Protocols and Concepts course in the Cisco Networking Academy® CCNA® Exploration curriculum version 4. This course describes the architecture, components, and operation of routers, and explains the principles of routing and the primary routing protocols. The Companion Guide, written and edited by Networking Academy instructors, is designed as a portable desk reference to use anytime, anywhere. The book’s features reinforce the material in the course to help you focus on important concepts and organize your study time for exams. New and improved features help you study and succeed in this course: Chapter objectives–Review core concepts by answering the focus questions listed at the beginning of each chapter. Key terms–Refer to the updated lists of networking vocabulary introduced and turn to the highlighted terms in context in each chapter. Glossary–Consult the comprehensive glossary with more than 150 terms. Check Your Understanding questions and answer key–Evaluate your readiness with the updated end-of-chapter questions that match the style of questions you see on the online course quizzes. The answer key explains each answer. Challenge questions and activities–Strive to ace more challenging review questions and activities designed to prepare you for the complex styles of questions you might see on the CCNA exam. The answer key explains each answer. Rick Graziani has been a computer science and networking instructor at Cabrillo College since 1994. Allan Johnson works full time developing curriculum for Cisco Networking Academy. Allan also is a part-time instructor at Del Mar College in Corpus Christi, Texas. How To–Look for this icon to study the steps you need to learn to perform certain tasks. Packet Tracer Activities– Explore networking concepts in activities interspersed throughout some chapters using Packet Tracer v4.1 developed by Cisco®. The files for these activities are on the accompanying CD-ROM. Also available for the Routing Protocols and Concepts Course: Routing Protocols and Concepts CCNA Exploration Labs and Study Guide ISBN-10: 1-58713-204-4 ISBN-13: 978-1-58713-204-9 Companion CD-ROM **See instructions within the ebook on how to get access to the files from the CD-ROM that accompanies this print book.** The CD-ROM provides many useful tools and information to support your education: Packet Tracer Activity exercise files v4.1 A Guide to Using a Networker’s Journal booklet Taking Notes: a .txt file of the chapter objectives More IT Career Information Tips on Lifelong Learning in Networking This book is part of the Cisco Networking Academy Series from Cisco Press®. The products in this series support and complement the Cisco Networking Academy online curriculum.
Covers topics covered in the ICND1 100-101, ICND2 200-101, and CCNA 200-120 exams along with a summarization of commands, keywords, command augments, and associated prompts.
