Calorimetry, as a technique for thermal analysis, has a wide range of applications which are not only limited to studying the thermal characterisation (e.g. melting temperature, denaturation temperature and enthalpy change) of small and large drug molecules, but are also extended to characterisation of fuel, metals and oils. Differential Scanning Calorimetry is used to study the thermal behaviours of drug molecules and excipients by measuring the differential heat flow needed to maintain the temperature difference between the sample and reference cells equal to zero upon heating at a controlled programmed rate. Microcalorimetry is used to study the thermal transition and folding of biological macromolecules in dilute solutions. Microcalorimetry is applied in formulation and stabilisation of therapeutic proteins. This book presents research from all over the world on the applications of calorimetry on both solid and liquid states of materials.
This book addresses the basic understanding of food contaminants and their sources, followed by the techniques to measure food safety and quality. It is divided into four parts: Part A - sources of contaminants in foods, their associated health risks, and integrated management and alternative options to minimize contaminants; Part B - Technological assessment of conventional methods and selected advanced methods for the detection, identification and enumeration of microbial contaminates; Part C - Technological assessment of different chemical measurements techniques; and Part D – Technological assessment of different instrumental techniques to assess sensory properties of foods. Food safety is a growing concern due to the increase in food-borne illnesses caused by food adulteration, excessive use of pesticides, use of chemical preservatives and artificial fruit ripening agents, microbial contaminations, and improper food handling. Chemical contaminants in food could be transferred from environmental or agrochemical sources, personal care products, and other by-products of water disinfects. In addition, microbial food safety can be threatened due to the presence of many pathogens, such as Salmonella, Escherichia coli, Clostridium botulinum, Staphylococcus aureus, and Listeria monocytogenes in foods. Globally, strict regulations are imposed to limit the potential contaminants in foods. Development of accurate, rapid, and inexpensive approaches to test food contamination and adulteration would be highly valued to ensure global food safety. There are existing processes to ensure safety of food products from chemical and microbial contaminants. Apart from the existing measurement technologies, varieties of new techniques are also being emerged and these could be potential to ensure food safety and quality. In addition to chemical and microbial properties, sensory properties such as texture, mouth feel, flavor, and taste, are among the most important attributes of food products to ensure their acceptability by consumers. Two approaches are available to evaluate sensory properties of food products, namely subjective and objective analyses. The responses are perceived by all five senses: smell, taste, sight, touch, and hearing. The approach used in sensory evaluation varies depending on the types of foods and the ultimate goal of the testing. Sensory attributes are the most important quality parameters after ensuring the safety of foods.
This book provides an update on recent advances in various areas of modern engineering design, such as mechanical, materials, computer, and process engineering, which provide the foundation for the development of improved structures, materials, and processes. The modern design cycle is characterized by the interaction of different disciplines and a strong shift toward computer-based approaches involving only a small number of experiments for verification purposes. A major driver for this development is the increased demand for cost reduction, which is also connected to environmental demands. In the transportation industry (e.g. automotive or aerospace), where there is a demand for greater fuel efficiency, one solution is lighter structures and/or improved processes for energy conversion. Another emerging area is the interaction of classical engineering with the health and medical sector.
The book explores the new developments that have taken place in recent years in the processing and application of aluminium alloys. The chapter on self diffusion shows a complete detail of the mechanism of diffusion in aluminium alloys and how it affects the strength. The chapter on native oxide films gives useful information on the films developed on commercial magnesium alloys. On the analytical side, the details of Mossbauer spectroscopy related to aluminium alloys fully described. One recent development in aluminium alloys is the controlling of pitting corrosion by the application of superhydrophobic coatings. Complete details of the theory and application of hydrophobicity related to aluminium alloys is shown in the two chapters related to hydrophobicity. It is hoped that this book will be found useful by researchers and general readers in the areas described in the book.
Performance Testing of Textiles: Methods, Technology and Applications examines the developed and established methodology for testing performance textiles, also summarizing the material properties for advanced applications. This book emphasizes reproducible tests using commonly used experimental methods reported in scientific literature and internationally recognized testing standards to quantify textile material properties and performance. After an introductory explanation of key fiber and textile properties and testing methods, the book summarizes electronic testing theories, technologies, and instrumentation for performance textiles. Also covered are aspects of military textile, medical textile, sportswear, smart composites, and wearable textiles which, as examples, present the latest research and results related to performance textile testing and applications. - Offers up-to-date coverage of new and advanced performance testing techniques for the fiber and textile industries - Explores key fiber and textile properties - Summarizes electronic testing theories, technologies, and instrumentation for performance textiles - Includes contributions from an international team of authors edited by an expert in the field
Textile testing is an important field of textile sciences involving experimental evaluation of conventional as well as technical textile products. This book aims to provide technical details, required protocols and procedures for conducting any specific evaluation test along with key parameters. The book covers the topics in two main sections, first one for the conventional textile testing techniques starting from fiber to final product while the second one focusses on testing of technical textiles. Written with a reader friendly approach, it will cater to graduate students in textile engineering as well as industry personnel, focusing on following key points: Addresses all techniques for testing both conventional and technical textiles. Describes testing techniques compliance with the latest requirements of the updated EN ISO and AATCC standards. Provides detailed description on the testing of technical textiles and their products. Discusses the operations conditions, like atmospheric conditions, and human error with cause and effect diagrams. Covers both destructive and non-destructive testing.
Lightweight Ballistic Composites: Military and Law-Enforcement Applications, Second Edition, is a fully revised and updated version of this informative book that explores the many changes in composite materials technology that have occurred since the book's first release in 2008, especially the type of commercial products used by armed forces around the world. Some changes can be attributed to the wars in Iraq and Afghanistan, whereas others are due to massive investment by private companies to neutralize the ever-increasing global threats and fulfill the military's appetite for lighter materials. Soldiers are now better protected against new ballistic threats and the overall weight of body protection has been reduced, while comfort has increased. New military vehicles are no longer purely armored with steel, and are instead lined with lightweight ballistic materials that increase the distance military vehicles can travel without refueling and also improve maneuverability. The book considers all aspects of lightweight ballistic composites from fiber manufacturing to commercial products and testing. Chapters also cover the many uses of lightweight ballistic composites in the military and law-enforcement industries. It will be an invaluable reference for ballistic composite design engineers, product development engineers, and all those involved in promoting new products for both defense and the law-enforcement industry. - Gives comprehensive coverage on all aspects of lightweight ballistic composites, from fiber manufacturing, to commercial products and testing - Discusses the wider applications of lightweight ballistic composites in military and law-enforcement industries - Edited by a highly respected industry expert with over thirty years' experience developing lightweight composite ballistic materials and products
Multifunctional Polymeric Nanocomposites Based on Cellulosic Reinforcements introduces the innovative applications of polymeric materials based on nanocellulose, and covers extraction methods, functionalization approaches, and assembly methods to enable these applications. The book presents the state-of-the-art of this novel nano-filler and how it enables new applications in many different sectors, beyond existing products. With a focus on application of nano-cellulose based polymers with multifunctional activity, the book explains the methodology of nano-cellulose extraction and production and shows the potential performance benefits of these particular nanostructured polymers, for applications across different sectors, including food active packaging, energy-photovoltaics, biomedical, and filtration. The book describes how the different methodologies, functionalization, and organization at the nano-scale level could contribute to the design of required properties at macro level. The book studies the interactions between the main nano-filler with other active systems and how this interaction enables multi-functionality in the produced materials. The book is an indispensable resource for the growing number of scientists and engineers interested in the preparation and novel applications of nano-cellulose, and for industrial scientists active in formulation and fabrication of polymer products based on renewable resources. - Provides insight into nanostructure formation science, and processing of polymeric materials and their characterization - Offers a strong analysis of real industry needs for designing the materials - Provides a well-balanced structure, including a light introduction of basic knowledge on extraction methods, functionalization approaches, and assembling focused to applications - Describes how different methodologies, functionalization, and organization at the nano-scale level could contribute to the design of required properties at macro level
Nanostructured Lithium-ion Battery Materials: Synthesis and Applications provides a detailed overview of nanostructured materials for application in Li-ion batteries, supporting improvements in materials selection and battery performance. The book begins by presenting the fundamentals of Lithium-ion batteries, including electrochemistry and reaction mechanism, advantages and disadvantages of Li-ion batteries, and characterization methods. Subsequent sections provide in-depth coverage of a range of nanostructured materials as applied to cathodes, electrolytes, separators, and anodes. Finally, other key aspects are discussed, including industrial scale-up, safety, life cycle analysis, recycling, and future research trends. This is a valuable resource for researchers, faculty, and advanced students across nanotechnology, materials science, battery technology, energy storage, chemistry, applied physics, chemical engineering, and electrical engineering. In an industrial setting, this book will be of interest to scientists, engineers, and R&D professionals working with advanced materials for Li-ion batteries and other energy storage applications. - Introduces fundamental of Lithium-ion batteries, electrochemistry, and characterization methods - Offers in-depth information on nanostructured cathode, electrolyte, separator, and anode materials - Addresses lab to industry challenges, safety, lifecycle analysis, recycling, and future opportunities
Obesity is an increasing problem on a global scale, and strategies for its prevention involve experts from many disciplines including nutritionists, physicians, policy-makers and public health professionals. This book covers the latest advances in obesity development, management and prevention with specific focus on dietary interventions. Part one covers the development of obesity and key drivers for its continuation and increase. Part two looks at the role of specific dietary components in obesity management, and part three discusses the role of behavioural factors such as eating patterns in managing and preventing obesity. Part four focuses on structured dietary interventions for obesity treatment, and part five looks at public interventions and consumer issues. - Reviews how different foods and diets can affect obesity management - Examines various ways of preventing and treating obesity - Explores how governments and industries are preventing and treating obesity
