Introductory technical guidance for civil engineers, geotechnical engineers and construction managers interested in construction of tunnels and shafts. Here is what is discussed: 1. GENERAL, 2. TUNNEL EXCAVATION BY DRILLING AND BLASTING, 3. TUNNEL EXCAVATION BY MECHANICAL MEANS, 4. INITIAL GROUND SUPPORT, 5. SEQUENTIAL EXCAVATION AND SUPPORT, 6. PORTAL CONSTRUCTION, 7. SHAFT CONSTRUCTION, 8. OPTIONS FOR GROUND IMPROVEMENT, 9. DRAINAGE AND CONTROL OF GROUNDWATER, 10. CONSTRUCTION OF FINAL, PERMANENT TUNNEL LININGS, 11. VENTILATION OF TUNNELS AND SHAFTS, 12. SURVEYING FOR TUNNELS AND SHAFTS, 13. CONSTRUCTION HAZARDS AND SAFETY REQUIREMENTS, 14. ENVIRONMENTAL CONSIDERATIONS AND EFFECTS, 15. CONTRACTING PRACTICES, 16. PRACTICAL CONSIDERATIONS FOR THE PLANNING OF TUNNEL PROJECTS.
Introductory technical guidance for civil engineers, geotechnical engineers and other professional engineers nd construction managers interested in design and construction of tunnels and shafts in rock and soil. Here is what is discussed: 1. CONSTRUCTION BY BLASTING AND BORING, 2. DESIGN CONSIDERATIONS, 3. GEOTECHNICAL ANALYSIS, 4. INITIAL GROUND SUPPORT DESIGN, 5. CONSTRUCTION OF TUNNELS AND SHAFTS, 6. GEOTECHNICAL EXPLORATION, 7. GROUND SUPPORT, 8. TUNNELS AND SHAFTS IN ROCK.
Introductory technical guidance for civil engineers, geotechnical engineers and other professional engineers and construction managers interested in design and construction of tunnels and shafts in rock. Here is what is discussed: 1. FUNDAMENTAL APPROACH TO GROUND SUPPORT DESIGN, 2. FUNCTIONAL REQUIREMENTS OF TUNNELS AND SHAFTS, 3. MODES OF FAILURE OF TUNNELS AND SHAFTS, 4. SEISMIC EFFECTS ON TUNNELS.
Tunnelling provides a robust solution to a variety of engineering challenges. It is a complex process, which requires a firm understanding of the ground conditions as well as the importance of ground-structure interaction. This book covers the full range of areas related to tunnel construction required to embark upon a career in tunnelling. It also includes a number of case studies related to real tunnel projects, to demonstrate how the theory applies in practice. New features of this second edition include: the introduction of a case study related to Crossrail’s project in London, focussing on the Whitechapel and Liverpool Street station tunnels and including considerations of building tunnels in a congested urban area; and further information on recent developments in tunnel boring machines, including further examples of all the different types of machine as well as multi-mode machines. The coverage includes: Both hard-rock and soft-ground conditions Site investigation, parameter selection, and design considerations Methods of improving the stability of the ground and lining techniques Descriptions of the various main tunnelling techniques Health and safety considerations Monitoring of tunnels during construction Description of the latest tunnel boring machines Case studies with real examples, including Crossrail’s project in London Clear, concise, and heavily illustrated, this is a vital text for final-year undergraduate and MSc students and an invaluable starting point for young professionals and novices in tunnelling.
The Tunnel Engineering Handbook, Second Edition provides, in a single convenient volume, comprehensive coverage of the state of the art in the design, construction, and rehabilitation of tunnels. It brings together essential information on all the principal classifications of tunnels, including soft ground, hard rock, immersed tube and cut-and-cover, with comparisons of their relative advantages and suitability. The broad coverage found in the Tunnel Engineering Handbook enables engineers to address such critical questions as how tunnels are planned and laid out, how the design of tunnels depends on site and ground conditions, and which types of tunnels and construction methods are best suited to different conditions. Written by the leading engineers in the fields, this second edition features major revisions from the first, including: * Complete updating of all chapters from the first edition * Seven completely new chapters covering tunnel stabilization and lining, difficult ground, deep shafts, water conveyance tunnels, small diameter tunnels, fire life safety, tunnel rehabilitation and tunnel construction contracting *New coverage of the modern philosophy and techniques of tunnel design and tunnel construction contracting The comprehensive coverage of the Tunnel Engineering Handbook makes it an essential resource for all practicing engineers engaged in the design of tunnels and underground construction. In addition, the book contains a wealth of information that government administrators and planners and transportation officials will use in the planning and management of tunnels.
Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in dewatering systems for construction sites and other applications. Here is what is discussed: 1. INTRODUCTION, 2. METHODS FOR DEWATERING, PRESSURE RELIEF AND SEEPAGE CUTOFF, 3. GEOLOGIC, SOIL, AND GROUNDWATER INVESTIGATIONS.
This book provides a general review of the literature on underground structures, combined with new specifications, engineering case studies, and numerical simulations based on the authors’ research. It focuses on the basic concepts, theories, and methods of the design of underground structures. After an introduction, it covers various topics, such as elastic foundation beam theory and numerical analysis methods for underground structures, as well as the design of shallow underground structures, diaphragm wall structures, shield tunnel structures, caisson structures, immersed tube structures, and integral tunnel structures. It also includes tables for calculating elastic foundation beam. This book is intended for senior undergraduate and graduate students majoring in urban underground space engineering, building engineering, highway engineering, railway engineering, bridge and tunnel engineering, water conservancy and hydropower engineering.
Soft Ground Tunnel Design is a textbook that teaches the principles of tunnel and underground space design in soft ground. ‘Soft ground’ refers to soil, in contrast to rock. The book focuses on stability, prediction of ground movements and structural design of the lining. It shows that the choice of excavation and support methods depends on ground stability; limitation of damage to the existing built environment; and health, safety and environmental considerations. Author Benoît Jones builds on the basic principles of soil-structure interaction, the three-dimensional effects of construction sequence and the effects of construction on other surface or subsurface structures in steps of gradually increasing complexity. The use of worked examples throughout, and example problems at the end of each chapter, gives the reader confidence to apply their knowledge. Engineers and graduate students will be able to: • Understand the complex soil-structure interaction around an advancing tunnel. • Calculate heading stability. • Understand the basis for choosing an underground construction method and/or ground improvement method. • Design tunnel linings in soft ground using a variety of methods. • Predict ground movements. • Predict the effects of construction on the built environment and assess potential damage. Benoît Jones has worked in tunnelling as a designer, contractor and academic for more than 20 years. He set up and ran the MSc Tunnelling and Underground Space course at the University of Warwick. He is now managing director of his own company, Inbye Engineering.
Praise for the Second Edition: "This is the book that the dewatering sector really needs – it is reliably based on sound theory and profound understanding of the physical processes, yet is presented in a very accessible and user-friendly manner. It draws on many, many decades of experience, and yet is utterly up to date. . . . It is a one-stop shop for the dewatering practitioner – who can nonetheless rest assured that the theoretical basis of the methods presented is flawless." — Professor Paul L. Younger, FGS, FICE, C.Geol., C.Eng., FREng, University of Glasgow, Scotland, UK "The best reference on this topic available . . . and will prove useful to a wide variety of readers ranging from junior construction engineers or dewatering contractors to theoretical hydrogeologists and environmental managers. It is rare that a book is able to bridge the gap between theoretical design guidance and practical application." — S.N. Sterling, University of Waterloo, Canada The extensively updated Groundwater Lowering in Construction: A Practical Guide to Dewatering, 3rd Edition offers practical advice on all phases of groundwater control systems, from planning and design, through installation and maintenance, and ultimately decommissioning. The expertise provided in this book can help you improve working conditions, increase project viability, save time and reduce excavation costs. Designers and managers of construction and engineering projects are given the tools necessary to effectively control groundwater. The content is divided into three sections – Principles, Design and Construction. The Principles section explains the fundamentals of groundwater flow as it relates to civil engineering excavations. The Design section explores in extensive detail site investigation, permeability assessment methods and groundwater control strategies. Chapters in the Construction section describe dewatering and exclusion techniques, and examine the complete life cycle of a groundwater control scheme, including monitoring, maintenance and decommissioning. This section incorporates eleven case histories from the authors’ casebook. The 3rd edition has been greatly revised and updated, and contains more than 200 new illustrations. The new content covers: Permeability of soils and rocks Groundwater problems for excavations in rock Groundwater control for tunnelling projects, such as shafts and cross passages Methods for assessing permeability Decommissioning of dewatering systems Optimisation of groundwater control schemes. The new, expanded content offers valuable direction that can give you a true competitive advantage in the planning and execution of temporary and permanent dewatering works for excavation and tunnelling. Written for practising engineers, geologists and construction managers, as well as postgraduate engineering students, this revamped manual on design and practice presents numerous case studies and extensive references to enhance understanding. Martin Preene is a groundwater consultant, based in the UK. He has more than 30 years’ experience working on dewatering and groundwater control projects worldwide. The late Pat Cashman was the leading British exponent of groundwater control for his generation, championing a practical and straightforward approach for more than forty years.
