This book describes, in clear understandable language, the three main disciplines of adhesion technology: mechanics of the adhesive bond, chemistry of adhesives, and surface science. Some knowledge of physical and organic chemistry is assumed, but no familiarity with the science of adhesion is required. The emphasis is on understanding adhesion, how surfaces can be prepared and modified, and how adhesives can be formulated to perform a given task. Throughout the book, the author provides a broad view of the field, with a consistent style that leads the reader from one step to the next in gaining an understanding of the science.
Covering a wide range of industrial applications across sectors including medical applications, automotive/aerospace, packaging, electronics, and consumer goods, this book provides a complete guide to the selection of adhesives, methods of use, industrial applications, and the fundamentals of adhesion. Dr Ebnesajjad examines the selection of adhesives and adhesion methods and challenges for all major groups of substrate including plastics (thermosets and thermoplastics), elastomers, metals, ceramics and composite materials. His practical guidance covers joint design and durability, application methods, test methods and troubleshooting techniques. The science and technology of adhesion, and the principles of adhesive bonding are explained in a way that enhances the reader's understanding of the fundamentals that underpin the successful use and design of adhesives. The third edition has been updated throughout to include recent developments in the industry, with new sections covering technological advances such as nanotechnology, micro adhesion systems, and the replacement of toxic chromate technology. Provides practitioners of adhesion technology with a complete guide to bonding materials successfully Covers the whole range of commonly used substrates including plastics, metals, elastomers and ceramics, explaining basic principles and describing common materials and application techniques Introduces the range of commercially available adhesives and the selection process alongside the science and technology of adhesion
Over the last decade, or so, the growth in the use of adhesives, especially in ever more technically demanding applications, has been rapid and many major developments in the technology of adhesives have been reported. This growth has also led to attention being focused on somewhat more basic studies of the science of adhesion and adhesives, and in recent years our level of fundamental knowledge concerning the formation and mechanical performance of adhesive joints has increased dramatically. Such studies have, of course, been aided greatly by the development of the tools at the disposal of the investigators. For example, specific surface analytical techniques, such as X-ray photoelectron and secondary-ion mass spectroscopy, and the increasingly sophisticated methods of stress analysis and fracture mechanics have been put to good use in furthering our understanding of the science of adhesion and adhesives. The present book attempts to review the multidisciplined subject of adhesion and adhesives, considering both the science and technology involved in the formation and mechanical performance of adhesive joints. The author would like to thank his friends and colleagues for useful discus sions and help in the preparation of this book. I am particularly grateful to P. Cawley, J. Comyn, W. A. Lees, A. C. Roulin-Moloney, W. C. Wake, J. G. Williams and R. J. Young who have read and commented on various chapters and P. Farr for preparing the diagrams.
This book describes, in clear understandable language, the three main disciplines of adhesion technology: 1) mechanics of the adhesive bond 2) chemistry of adhesives, and 3) surface science. Some knowledge of physical and organic chemistry is assumed, but no familiarity with the science of adhesion is required. The emphasis is on understanding adhesion, how surfaces can be prepared and modified, and how adhesives can be formulated to perform a given task. Throughout the book, the author provides a broad view of the field, with a consistent style that leads the reader from one step to the next in gaining an understanding of the science.
The Mechanics of Adhesion shows that adhesion science and technology is inherently an interdisciplinary field, requiring fundamental understanding of mechanics, surfaces, and materials. This volume comprises 19 chapters. Starting with a background and introduction to stress transfer principles; fracture mechanics and singularities; and an energy approach to debonding, the volume continues with analysis of structural lap and butt joint configurations. It then continues with discussions of test methods for strength and constitutive properties; fracture; peel; coatings, the case of adhesion to a single substrate; elastomeric adhesives such as sealants. The role of mechanics in determining the locus of failure in bonded joints is discussed, followed by a chapter on rheology relevant to adhesives and sealants. Pressure sensitive adhesive performance; the principles of tack and tack measurements; and contact mechanics relevant to wetting and surface energy measurements are then covered. The volume concludes with sections on fibermatrix bonding and reinforcement; durability considerations for adhesive bonds; ultrasonic non-destructive evaluation of adhesive bonds; and design of adhesive bonds from a strength perspective. This book will be of interest to practitioners in the fields of engineering and to those with an interest in adhesion science.
The surface of an object is the first thing we see or touch. Nearly every article or object we encounter at home, in industry, land transportation, aerospace, or the medical field in some way uses an adhesive, a sealant, or a decorative coating. Adhesion science provides the technology and the know-how behind these applications. Recent Advances in
The Handbook of Adhesive Technology, Second Edition exceeds the ambition of its bestselling forerunner by reexamining the mechanisms driving adhesion, categories of adhesives, techniques for bond formation and evaluation, and major industrial applications. Integrating modern technological innovations into adhesive preparation and application, this greatly expanded and updated edition comprises a total of 26 different adhesive groupings, including three new classes. The second edition features ten new chapters, a 40-page list of resources on adhesives, and abundant figures, tables, equations.
This important collection reviews key research on adhesive behaviour and applications in sectors as diverse as construction and automotive engineering. The book is divided into three main parts: fundamentals, mechanical properties and applications. Part one focuses on the basic properties of adhesives, surface assessment and treatment. Part two concentrates on understanding how adhesives perform under stress and the factors affecting fatigue and failure. The final part of the book reviews industry specific applications in areas such as building and construction, transport and electrical engineering.With its distinguished editor and international team of contributors, Adhesive bonding is a standard reference for all those concerned with the industrial application of adhesives. Essential information for all those concerned with the industrial application of adhesives This important collection examines adhesives and adhesive bonding for load-bearing applications Arranged in a user-friendly format with three main sections: fundamentals, generic uses and industry specific applications
