The ideal woodturning book for beginners. Author Barry Gross is a recognized woodturning artist and professional woodturner. Expert instruction, valuable tips, and common-sense advice. Covers lathe selection, basics of turning tools, and fundamentals of sharpening, sanding, and finishing. Revised & expanded 3rd edition includes: New and accessible step-by-step projects; Special troubleshooting section that offers simple solutions to common turning mistakes; Inspiring color photo gallery of completed works.
Written for true beginners, this approachable and enjoyable instructional guide teaches the art of turning. Readers receive advice on every step of the turning process, including selecting the right lathe, basic safety and woodshop setup, an overview of the proper tools and how to use them, and the basics on sharpening, sanding, and finishing. Step-by-step instructions for eight projects such as a birdhouse, a simple bowl, and a pepper mill are included. This guide also features a special chapter that addresses and reveals surprisingly simple solutions to common beginner mistakes.
Everything a woodturner needs to know about using and implementing the exciting new technology of replaceable carbide cutting tips is included in this guide. Woodturning tools have taken a quantum leap since the recent introduction of these tips that have greatly simplified the task of turning in dry stock. Carbide-tipped woodturning tools are safer, faster, easier, and more efficient than traditional tools that require grinding the end of a piece of fluted steel to one of dozens of subjective profiles. The technology of the carbide cutters is fully explained, as are the various shafts and the function of the handle designs, providing insight into how and why these cutters act as they do, and why they are shaped as they are. Removing the intimidating aspects of turning, the guide explains the elimination of sharpening, addresses the issues of chatter and fatigue, and advises on maintenance, techniques, and usage. A number of projects are included--such as a candlestick, spinning tops, and a basic bowl--that can be completed right away by novice turners, rather than waiting for years to gain enough experience to do the same job with traditional tools.
This resource deals exclusively with teaching and improving woodturners' spindle forming skills and takes the reader through the basic techniques of turning wood. It includes 18 projects from basic spindle shapes through to more advanced projects.
Turning wood can be a relatively low cost hobby (in woodworking all things are relative). A mini-lathe, a set of turning tools, a grinder for sharpening, a work light and some protective gear can be purchased for between $750 and $1000. A mini-lathe can easily be stored under a bench. Setting it all up takes a relatively small amount of space. This book is designed to give you an understanding of the tools used by turners and the skills to safely and effectively use them. You'll practice so that you start to develop a "feel" for turning. The class begins with the fundamental rules for turning spindles safely and confidently and progresses to expanding your newly learned skills to turning of bowls from green (freshly cut) wood.
Build your woodturning skills and confidence with this variety of projects that take between a couple of hours and a couple of days to complete. All of the 25 projects can be undertaken using a limited amount of tools and equipment. Making use of the six basic tools - spindle roughing gouge, spindle gouge, parting tool, bowl gouge, skew chisel and scrapers - the book will introduce a couple of carving tools and a boring tool and explain why and how to use them.Each project will have a list of tools and materials required, drawings with dimensions and a panel on the wood used. Sections on safety and seasoning wood are also included.
Comprehensive guide from professional woodturner covers all aspects of woodturning, from working with a lathe and tools to preparing the wood and planning your designs to applying finish to your work
When Rude Osolnik was asked, "Rude, how do I become a good turner?" he replied, "Stand at the lathe." Well, that's the key! Of all the woodworking crafts I have practiced, Turning demands most patience and focus. As you start, you have to find your comfort zone with a lathe, chisels, and other tools. After some practice, your mind and body would get attenuated to the ecosystem of Turning. As lathe is involved and the wood item revolves fast, always remember that overconfidence and lack of focus are not options. So find your sweet spot of how long you can work at a stretch. When I first started woodcraft, I looked desperately for a go-to guide about the processes and tools I would need. The content I found online was total information overload and wasn't presented sequentially. The books I looked at were either focused on just a few processes or assumed that I already had the necessary information. A lot of the books were also very dated. There are two ways of learning; one is learning from SMEs (Subject Matter Experts) with years of experience, and the other is to learn from people who are just a few steps ahead of you in their journey. I fall into the latter group. I have spent five years on this hobby and am still learning from the experts. I still remember the initial doubts I had and the tips that helped me. This book is for those who are still running their first lap (0-3 years) in wood-crafting and want to have a holistic idea of the processes and tools they need. Topics Covered ✓ Introduction to Wood Turning ✓ Process & Techniques ✓ Finishing ✓ Safety and Best Practices ✓ 10 Beginner Woodturning Projects ✓ Tips, Glossary, and Conclusion I have included ample photographs of realistic beginner projects, and I will explain the processes and standard operating procedures associated with them. In the last chapter, I have provided tips for beginners and a glossary of woodturning terms. So what are you waiting for? Get this updated book from someone who is a few steps ahead in the Wood Turning journey! "If you don't blow up a bowl now and then, you are not aren't trying hard enough"- D. Raffin, Master Woodturner.
Discover how resin can transform your next woodturned project into a work of art... You've probably seen the dazzling work of woodturners who've combined resin with wood to create gorgeous, one-of-a-kind projects ranging from pens and bowls to platters, boxes and more. The end result is so amazing that you'd think the process would be too complicated and too expensive. It's not. In fact, once you learn the basic techniques of preparing and working with resin, you'll discover that it turns like butter and stunning results will have you thinking about your next project before the lathe has cooled down. From Keith Lackner, one of the leading resin woodturners today, Woodturning with Resin is a go-to guide for anyone who enjoys woodturning or is interested in getting started. With expert instruction and stunning photos, Woodturning with Resin takes you through the golden rules of preparing and curing resin for the lathe. Also covered are the fundamentals of how turning with resin is different than turning wood, the best tools, grinds, and speeds to use, and how to achieve a finish that makes the resin sparkle. With all this premium information under your belt, you'll be able to tackle the wide range of projects that are detailed step-by-step. Woodturning with Resin also includes a gallery of projects to spark your imagination and a helpful Troubleshooting Guide for when things don't seem to turn out right. Woodturning with Resin is the only guide you need to discover the fun, beauty, and unlimited potential of adding resin to your woodturning projects.
