Analog Layout Synthesis
Analog Layout Synthesis

Author: Helmut E. Graeb

Publisher: Springer Science & Business Media

Published: 2010-09-28

Total Pages: 302

ISBN-13: 1441969322

DOWNLOAD EBOOK

Integrated circuits are fundamental electronic components in biomedical, automotive and many other technical systems. A small, yet crucial part of a chip consists of analog circuitry. This part is still in large part designed by hand and therefore represents not only a bottleneck in the design flow, but also a permanent source of design errors responsible for re-designs, costly in terms of wasted test chips and in terms of lost time-to-market. Layout design is the step of the analog design flow with the least support by commercially available, computer-aided design tools. This book provides a survey of promising new approaches to automated, analog layout design, which have been described recently and are rapidly being adopted in industry.

Design Automation for Timing-Driven Layout Synthesis
Design Automation for Timing-Driven Layout Synthesis

Author: S. Sapatnekar

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 285

ISBN-13: 1461531780

DOWNLOAD EBOOK

Moore's law [Noy77], which predicted that the number of devices in tegrated on a chip would be doubled every two years, was accurate for a number of years. Only recently has the level of integration be gun to slow down somewhat due to the physical limits of integration technology. Advances in silicon technology have allowed Ie design ers to integrate more than a few million transistors on a chip; even a whole system of moderate complexity can now be implemented on a single chip. To keep pace with the increasing complexity in very large scale integrated (VLSI) circuits, the productivity of chip designers would have to increase at the same rate as the level of integration. Without such an increase in productivity, the design of complex systems might not be achievable within a reasonable time-frame. The rapidly increasing complexity of VLSI circuits has made de- 1 2 INTRODUCTION sign automation an absolute necessity, since the required increase in productivity can only be accomplished with the use of sophisticated design tools. Such tools also enable designers to perform trade-off analyses of different logic implementations and to make well-informed design decisions.

Monolithic Phase-Locked Loops and Clock Recovery Circuits
Monolithic Phase-Locked Loops and Clock Recovery Circuits

Author: Behzad Razavi

Publisher: John Wiley & Sons

Published: 1996-04-18

Total Pages: 516

ISBN-13: 9780780311497

DOWNLOAD EBOOK

Featuring an extensive 40 page tutorial introduction, this carefully compiled anthology of 65 of the most important papers on phase-locked loops and clock recovery circuits brings you comprehensive coverage of the field-all in one self-contained volume. You'll gain an understanding of the analysis, design, simulation, and implementation of phase-locked loops and clock recovery circuits in CMOS and bipolar technologies along with valuable insights into the issues and trade-offs associated with phase locked systems for high speed, low power, and low noise.

Field-Programmable Gate Arrays
Field-Programmable Gate Arrays

Author: Stephen D. Brown

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 218

ISBN-13: 1461535727

DOWNLOAD EBOOK

Field-Programmable Gate Arrays (FPGAs) have emerged as an attractive means of implementing logic circuits, providing instant manufacturing turnaround and negligible prototype costs. They hold the promise of replacing much of the VLSI market now held by mask-programmed gate arrays. FPGAs offer an affordable solution for customized VLSI, over a wide variety of applications, and have also opened up new possibilities in designing reconfigurable digital systems. Field-Programmable Gate Arrays discusses the most important aspects of FPGAs in a textbook manner. It provides the reader with a focused view of the key issues, using a consistent notation and style of presentation. It provides detailed descriptions of commercially available FPGAs and an in-depth treatment of the FPGA architecture and CAD issues that are the subjects of current research. The material presented is of interest to a variety of readers, including those who are not familiar with FPGA technology, but wish to be introduced to it, as well as those who already have an understanding of FPGAs, but who are interested in learning about the research directions that are of current interest.

Computer-Aided Design of Analog Integrated Circuits and Systems
Computer-Aided Design of Analog Integrated Circuits and Systems

Author: Rob A. Rutenbar

Publisher: John Wiley & Sons

Published: 2002-05-06

Total Pages: 773

ISBN-13: 047122782X

DOWNLOAD EBOOK

The tools and techniques you need to break the analog design bottleneck! Ten years ago, analog seemed to be a dead-end technology. Today, System-on-Chip (SoC) designs are increasingly mixed-signal designs. With the advent of application-specific integrated circuits (ASIC) technologies that can integrate both analog and digital functions on a single chip, analog has become more crucial than ever to the design process. Today, designers are moving beyond hand-crafted, one-transistor-at-a-time methods. They are using new circuit and physical synthesis tools to design practical analog circuits; new modeling and analysis tools to allow rapid exploration of system level alternatives; and new simulation tools to provide accurate answers for analog circuit behaviors and interactions that were considered impossible to handle only a few years ago. To give circuit designers and CAD professionals a better understanding of the history and the current state of the art in the field, this volume collects in one place the essential set of analog CAD papers that form the foundation of today's new analog design automation tools. Areas covered are: * Analog synthesis * Symbolic analysis * Analog layout * Analog modeling and analysis * Specialized analog simulation * Circuit centering and yield optimization * Circuit testing Computer-Aided Design of Analog Integrated Circuits and Systems is the cutting-edge reference that will be an invaluable resource for every semiconductor circuit designer and CAD professional who hopes to break the analog design bottleneck.

Reference Data for Engineers
Reference Data for Engineers

Author: Mac E. Van Valkenburg

Publisher: Newnes

Published: 2001-09-26

Total Pages: 1696

ISBN-13: 9780750672917

DOWNLOAD EBOOK

This standard handbook for engineers covers the fundamentals, theory and applications of radio, electronics, computers, and communications equipment. It provides information on essential, need-to-know topics without heavy emphasis on complicated mathematics. It is a "must-have" for every engineer who requires electrical, electronics, and communications data. Featured in this updated version is coverage on intellectual property and patents, probability and design, antennas, power electronics, rectifiers, power supplies, and properties of materials. Useful information on units, constants and conversion factors, active filter design, antennas, integrated circuits, surface acoustic wave design, and digital signal processing is also included. This work also offers new knowledge in the fields of satellite technology, space communication, microwave science, telecommunication, global positioning systems, frequency data, and radar.

Digital BiCMOS Integrated Circuit Design
Digital BiCMOS Integrated Circuit Design

Author: Sherif H.K. Embabi

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 413

ISBN-13: 1461531748

DOWNLOAD EBOOK

Digital BiCMOS Integrated Circuit Design is the first book devoted entirely to the analysis and design of digital BiCMOS integrated circuits. BiCMOS Integrated Circuit Design also reviews CMOS and CML integrated circuit design. The application of BiCMOS in the design of digital subsystems, e.g. adders, multipliers, RAMs and PLAs is addressed. The book also introduces the reader to IC process technology: CMOS, bipolar and BiCMOS. The modeling of both the bipolar and MOS devices are covered. Many process/device/circuit design issues are discussed. Digital BiCMOS Integrated Circuit Design can be used by engineers, researchers, graduate and senior undergraduate students working in the area of digital integrated circuits, digital circuits and system design, BiCMOS process and device modeling.

Microsystems Technology for Multimedia Applications
Microsystems Technology for Multimedia Applications

Author: Bing Jay Sheu

Publisher: Institute of Electrical & Electronics Engineers(IEEE)

Published: 1995

Total Pages: 760

ISBN-13:

DOWNLOAD EBOOK

Current interest in NAD (Nicotinamide adenine dinucleotide) in biological systems focuses on its role in ADP-ribose transfer reactions. These appear to be fundamentally involved in the regulation of many physiological processes. The contributions in this monograph thus represent the range of research in the very active investigation of niacin metabolism. The major topics covered are:??? - Enzymology of ADP-Ribosylation - ADP-Ribosylation and Chromatin Function - Carcinogenesis and Differentiation - NAD Metabolism and Chemotherapy - ADP-Ribosylation and Signal Transduction - Molecular Genetic Approaches to.

Economics of Electronic Design, Manufacture and Test
Economics of Electronic Design, Manufacture and Test

Author: M. Abadir

Publisher: Springer Science & Business Media

Published: 2013-06-29

Total Pages: 181

ISBN-13: 147575048X

DOWNLOAD EBOOK

The general understanding of design is that it should lead to a manufacturable product. Neither the design nor the process of manufacturing is perfect. As a result, the product will be faulty, will require testing and fixing. Where does economics enter this scenario? Consider the cost of testing and fixing the product. If a manufactured product is grossly faulty, or too many of the products are faulty, the cost of testing and fixing will be high. Suppose we do not like that. We then ask what is the cause of the faulty product. There must be something wrong in the manufacturing process. We trace this cause and fix it. Suppose we fix all possible causes and have no defective products. We would have eliminated the need for testing. Unfortunately, things are not so perfect. There is a cost involved with finding and eliminating the causes of faults. We thus have two costs: the cost of testing and fixing (we will call it cost-1), and the cost of finding and eliminating causes of faults (call it cost-2). Both costs, in some way, are included in the overall cost of the product. If we try to eliminate cost-1, cost-2 goes up, and vice versa. An economic system of production will minimize the overall cost of the product. Economics of Electronic Design, Manufacture and Test is a collection of research contributions derived from the Second Workshop on Economics of Design, Manufacture and Test, written for inclusion in this book.