This book describes the wind resources in the built environment that can be converted into energy by a wind turbine. It especially deals with the integration of a wind turbine and a building in such a way that the building concentrates the available wind energy for the wind turbine. The three different ways to concentrate wind power are examined: wind turbines on the roof or at the sides of a building; wind turbines between two airfoil shaped buildings; wind turbines in ducts through buildings.
The generation of electricity by wind energy has the potential to reduce environmental impacts caused by the use of fossil fuels. Although the use of wind energy to generate electricity is increasing rapidly in the United States, government guidance to help communities and developers evaluate and plan proposed wind-energy projects is lacking. Environmental Impacts of Wind-Energy Projects offers an analysis of the environmental benefits and drawbacks of wind energy, along with an evaluation guide to aid decision-making about projects. It includes a case study of the mid-Atlantic highlands, a mountainous area that spans parts of West Virginia, Virginia, Maryland, and Pennsylvania. This book will inform policy makers at the federal, state, and local levels.
This book addresses the main challenges faced today in implementing the Nearly Zero Energy Buildings (nZEB) concept. The book starts with a chapter that addresses problems related to the energy demand and renewable energy sources available in the built environment, along with the restrictions and opportunities in developing sustainable, efficient and affordable solutions, also gaining aesthetic and architectural acceptance. Advanced solutions to cover the energy needs by using various renewable-based energy mixes are presented in two chapters. These two chapters discuss the problem of conversion efficiency at the level of components and systems, aiming at giving value to the variable renewable energy sources, in producing thermal and electric energy. The concept is discussed further in a chapter on advanced solutions for water re-use and recycling wastes as second raw materials. The need for new strategies and implementation tools, for education and training is addressed in the final chapter as part of the nZEB concept, towards sustainable communities. The sub-chapters of the book were openly presented during the 4th Edition of the Conference for Sustainable Energy, held 6-8 November, 2014 and organized by the R&D Centre Renewable Energy Systems and Recycling at the Transilvania University of Brasov, Romania. This event was developed under the patronage of the International Federation for the Promotion of Mechanism and Machine Science (IFToMM), through the Technical Committee Sustainable Energy Systems.
Business Models for Renewable Energy in the Built Environment provides insight to policy makers and market actors as to the ways that new and innovative business models (and/or policy measures) can stimulate the deployment of renewable energy technologies (RET) and energy efficiency (EE) measures in this field. This project was initiated and funded by the IEA Implementing Agreement for Renewable Energy Technology Deployment (IEA-RETD). It analyses ten business models in three categories, covering different types of energy service companies (ESCO’s). Included developing properties certified with a ‘green’ building label building owners profiting from rent increases after EE measures property Assessed Clean Energy (PACE) financing on-bill financing leasing of RET equipment. Coverage extends to the organisational and financial structure of the models and the existing market and policy context, plus analysis of Strengths, Weaknesses, Opportunities and Threats (SWOT). The book concludes with recommendations for policy makers and other market actors on how to encourage and accelerate built environment renewable energy technologies.
IEA-RETD stands for International Energy Agency - Renewable energy technology development. This book provides insight to policy makers and market actors regarding the way that new and innovative business models can stimulate the deployment of renewable energy technologies and energy efficiency measures in the built environment.
Energy security, rising energy prices (oil, gas, electricity), 'peak oil', environmental pollution, nuclear energy, climate change and sustainable living are hot topics across the globe. Meanwhile, abundant and perpetual wind resources offer opportunities, via recent technological developments, to provide part of the solution to address these key issues. The rapid growth of large-scale wind farm installations has now led to the generation of clean electricity for tens of millions of homes around the world. However, despite the potential to reduce the losses and costs associated with transmission and to use local wind acceleration techniques to improve energy yields, the potential for urban wind energy has yet to be realised. Although there is increasing public interest, the uptake of urban wind energy in suitable areas has been slow. This is in part due to a lack of understanding of key issues such as: available wind resources; technology integration; planning processes (include assessment of environmental impacts and public safety due to close proximity to people and property); energy consumption in buildings versus energy production from turbines; economics (including grants, subsidies, maintenance); and the effect of complex urban windscapes on performance. Urban Wind Energy attempts to illuminate these areas, addressing common concerns highlighting pitfalls, offering real world examples and providing a framework to assess viability in energy, environmental and economic terms. It is a comprehensive guide to urban wind energy for architects, engineers, planners, developers, investors, policy-makers, manufacturers and students as well as community organisations and home-owners interested in generating their own clean electricity.
Global populations have grown rapidly in recent decades, leading to ever increasing demands for shelter, resources, energy and utilities. Coupled with the worldwide need to achieve lower impact buildings and conservation of resources, the need to achieve sustainability in urban environments has never been more acute. This book critically reviews the fundamental issues and applied science, engineering and technology that will enable all cities to achieve a greater level of metropolitan sustainability, and assist nations in meeting the needs of their growing urban populations.Part one introduces key issues related to metropolitan sustainability, including the use of both urban metabolism and benefit cost analysis. Part two focuses on urban land use and the environmental impact of the built environment. The urban heat island effect, redevelopment of brownfield sites and urban agriculture are discussed in depth, before part three goes on to explore urban air pollution and emissions control. Urban water resources, reuse and management are explored in part four, followed by a study of urban energy supply and management in part five. Solar, wind and bioenergy, the role of waste-to-energy systems in the urban infrastructure, and smart energy for cities are investigated. Finally, part six considers sustainable urban development, transport and planning.With its distinguished editor and international team of expert contributors, Metropolitan sustainability is an essential resource for low-impact building engineers, sustainability consultants and architects, town and city planners, local/municipal authorities, and national and non-governmental bodies, and provides a thorough overview for academics of all levels in this field. - Critically reviews the fundamental issues and applied science, engineering and technology that will enable all cities to achieve a greater level of metropolitan sustainability - Will assist nations in meeting the needs of their growing urban populations - Chapters discuss urban land use, the environmental impact of the build environment, the urban heat island effect, urban air pollution and emissions control, among other topics
Brings together disparate conversations about wildlife conservation and renewable energy, suggesting ways these two critical fields can work hand in hand. Renewable energy is often termed simply "green energy," but its effects on wildlife and other forms of biodiversity can be quite complex. While capturing renewable resources like wind, solar, and energy from biomass can require more land than fossil fuel production, potentially displacing wildlife habitat, renewable energy infrastructure can also create habitat and promote species health when thoughtfully implemented. The authors of Renewable Energy and Wildlife Conservation argue that in order to achieve a balanced plan for addressing these two crucially important sustainability issues, our actions at the nexus of these fields must be directed by current scientific information related to the ecological effects of renewable energy production. Synthesizing an extensive, rapidly growing base of research and insights from practitioners into a single, comprehensive resource, contributors to this volume • describe processes to generate renewable energy, focusing on the Big Four renewables—wind, bioenergy, solar energy, and hydroelectric power • review the documented effects of renewable energy production on wildlife and wildlife habitats • consider current and future policy directives, suggesting ways industrial-scale renewables production can be developed to minimize harm to wildlife populations • explain recent advances in renewable power technologies • identify urgent research needs at the intersection of renewables and wildlife conservation Relevant to policy makers and industry professionals—many of whom believe renewables are the best path forward as the world seeks to meet its expanding energy needs—and wildlife conservationists—many of whom are alarmed at the rate of renewables-related habitat conversion—this detailed book culminates with a chapter underscoring emerging opportunities in renewable energy ecology. Contributors: Edward B. Arnett, Brian B. Boroski, Regan Dohm, David Drake, Sarah R. Fritts, Rachel Greene, Steven M. Grodsky, Amanda M. Hale, Cris D. Hein, Rebecca R. Hernandez, Jessica A. Homyack, Henriette I. Jager, Nicole M. Korfanta, James A. Martin, Christopher E. Moorman, Clint Otto, Christine A. Ribic, Susan P. Rupp, Jake Verschuyl, Lindsay M. Wickman, T. Bently Wigley, Victoria H. Zero
Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)
Due to the mounting demand for energy and increasing population of the world, switching from nonrenewable fossil fuels to other energy sources is not an option-it is a necessity. Focusing on a cost-effective option for the generation of electricity, Wind Energy: Renewable Energy and the Environment covers all facets of wind energy and wind turbines
