Titanium
Titanium

Author: Matthew J. Donachie

Publisher: ASM International

Published: 2000

Total Pages: 381

ISBN-13: 161503062X

DOWNLOAD EBOOK

Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.

Titanium and Titanium Alloys
Titanium and Titanium Alloys

Author: Christoph Leyens

Publisher: John Wiley & Sons

Published: 2006-03-06

Total Pages: 532

ISBN-13: 3527605207

DOWNLOAD EBOOK

This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.

Advanced Joining Processes
Advanced Joining Processes

Author: Lucas F. M. da Silva

Publisher: Springer Nature

Published: 2020-03-31

Total Pages: 178

ISBN-13: 9811529574

DOWNLOAD EBOOK

This book presents recent material science-based and mechanical analysis-based advances in joining processes. It includes all related processes, e.g. friction stir welding, joining by plastic deformation, laser welding, clinch joining, and adhesive bonding, as well as hybrid joints. It gathers selected full-length papers from the 1st Conference on Advanced Joining Processes.

Joining of Titanium
Joining of Titanium

Author: Robert Edward Monroe

Publisher:

Published: 1967

Total Pages: 86

ISBN-13:

DOWNLOAD EBOOK

This report supplies information on joining processes applicable to titanium and its alloys in sheet metal applications, primarily related directly to airframe construction. Although the material presented here does not cover all titanium joining processes, and omits such processes as plasma-arc, submerged-arc, electroslag, flash, and high-frequency resistance welding, the data presented cover materials up to 2-inches thick in some cases and the report should be useful to anyone seeking titanium joining information. The joining processes covered fall into five categories: welding, brazing, metallurgical bonding (diffusion and deformation bonding), adhesive bonding, and mechanical fastening. The fusion welding processes that are discussed in detail include gas tungsten arc, gas metal arc, arc spot, and electron beam. The resistance processes give extended coverage are spot, roll spot, and seam welding. (Author).

AWS A5. 16-A5. 16M-2013 (ISO 24034-2010 MOD), Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods
AWS A5. 16-A5. 16M-2013 (ISO 24034-2010 MOD), Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods

Author: American Welding Society. Committee on Filler Metals and Allied Materials

Publisher:

Published: 2013-03-11

Total Pages: 26

ISBN-13: 9780871718341

DOWNLOAD EBOOK

This specification prescribes the requirements for the classification of over 30 titanium and titanium-alloy welding electrodes and rods. Classification is based on the chemical composition of the electrode. Major topics include general requirements, testing, packaging, and application guidelines. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other. This specification adopts the requirements of ISO 24034 and incorporates the provisions of earlier versions of A5.16/A5.16M, allowing for classifications under both specifications.

Titanium Alloys
Titanium Alloys

Author: Jane Perry (Science writer)

Publisher: Nova Science Publishers

Published: 2017

Total Pages: 120

ISBN-13: 9781536104530

DOWNLOAD EBOOK

Titanium and its alloys are among the most important materials with a wide range of applications. Titanium and its alloy offer a good combination of properties, such as low density, high strength-to-weight ratio, good biocompatibility, and excellent corrosion resistance. These excellent properties make Titanium and its alloys the favourite of many industries that ranges between, land, air and water applications. In this book, Chapter One provides a review of laser additive manufacturing of titanium and its alloys. Chapter Two presents some of these properties produced through research of laser metal deposition of Ti6Al4V. Chapter Three determines the effects of welding heat input on the high-temperature tensile properties, toughness, and microstructural features of titanium alloy. Chapter Four presents a commentary on the positive roles of hydrogen in titanium alloys in the aspects of microstructural refinement, hot workability, superplasticity, powder metallurgy, hydrogen storage, mechanical properties, wear resistance, welding, bonding, machining and deoxidation, with the purpose of helping readers to obtain a quick method of the special and effective hydrogen treatment technology of titanium alloys.

Titanium
Titanium

Author: Gerd Lütjering

Publisher: Springer Science & Business Media

Published: 2013-06-29

Total Pages: 385

ISBN-13: 3540713980

DOWNLOAD EBOOK

The authors were motivated to prepare this book by the absence of any recent comprehensive book on titanium. The intent of this book is to provide a modern compendium that addresses both the phyical metallurgy as well as the applications of titanium. Until now the only book on this subject is that by Zwicker which was written in German and published almost 30 years ago. Chapter 1 is an introduction to the subject including some historical aspects of titanium. Chapter 2 is a s- mary of the Fundamental Aspects of Titanium, Chapter 3 is a summary of the Technological Aspects of Titanium and Chapters 4 through 9 address the specifics of the various classes of titanium ranging from CP Titanium to Titanium Matrix Composites. Finally, Chapter 10 covers “special” properties and applications of titanium. Our intent has been to address the subject conceptually rather than provide quantities of data of the sort that would be found in a Handbook. It is our intent that this book is useful for materials scientists and engineers interested in using titanium and for students either as a sourcebook or as a textbook. We have - tempted to include a representative set of references which provide additional detail for readers interested in specific aspects of titanium. Because of the re- tively recent growth of the technological importance of titanium, there is a vo- minous literature on titanium. While our references span this literature it has proven impossible to mention every contribution.

Machining of Titanium Alloys
Machining of Titanium Alloys

Author: J. Paulo Davim

Publisher: Springer

Published: 2014-07-05

Total Pages: 154

ISBN-13: 3662439026

DOWNLOAD EBOOK

This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.