Read and Download eBook Full
Author: Constantianus J.M. Koenraadt
Publisher: Brill Wageningen Academic
Published: 2021-03-04
Total Pages: 0
ISBN-13: 9789086863440
DOWNLOAD EBOOKThis 6th volume of the ECVD series reflects on the progress of GVCR. The introduction and concluding chapters of the book have been written in collaboration with WHO.
Author: Nguyen Phung Quang
Publisher: Springer
Published: 2015-05-14
Total Pages: 374
ISBN-13: 3662469154
DOWNLOAD EBOOKThis book addresses the vector control of three-phase AC machines, in particular induction motors with squirrel-cage rotors (IM), permanent magnet synchronous motors (PMSM) and doubly-fed induction machines (DFIM), from a practical design and development perspective. The main focus is on the application of IM and PMSM in electrical drive systems, where field-orientated control has been successfully established in practice. It also discusses the use of grid-voltage oriented control of DFIMs in wind power plants. This second, enlarged edition includes new insights into flatness-based nonlinear control of IM, PMSM and DFIM. The book is useful for practitioners as well as development engineers and designers in the area of electrical drives and wind-power technology. It is a valuable resource for researchers and students.
Author: Peter W. Atkinson
Publisher: Springer Science & Business Media
Published: 2009-12-12
Total Pages: 258
ISBN-13: 9048124581
DOWNLOAD EBOOKMir S. Mulla joined the faculty of the Entomology Department at the University of California, Riverside in 1956, only two years after the Riverside campus was established as an independent campus within the University of California system. Prior to his appointment, Mir received his B.S. from Cornell University and then moved to the University of California, Berkeley to pursue his graduate studies. His Ph.D. from Berkeley, awarded in 1955, completed his formal American education which was the purpose of his immigration from his native Kandahar in Afghanistan. In his over 50 years at Riverside, Mir has made an incalculable impact on vector biology both within the United States and in developing countries throughout the world. Within Southern California, Mir’s basic and applied research led to the rapid and sustainable control of mosquitoes and eye gnats in the Coachella Valley and so directly enabled this region to grow to the thriving, large community it is today. In 2006 his efforts in facilitating the development of the low desert of southern California were recognized through the dedication of the Mir S. Mulla Biological Control Facility by the Coachella Valley Mosquito and Vector Control District. His success has been so profound that it remains somewhat cryptic to the many who now reside in, visit, and enjoy, this region of California, oblivious to the insect problems that severely restrained development until Mir and his students ?rst applied their expertise many decades ago.
Author: World Health Organization
Publisher: World Health Organization
Published: 2009
Total Pages: 159
ISBN-13: 9241547871
DOWNLOAD EBOOKThis publication is intended to contribute to prevention and control of the morbidity and mortality associated with dengue and to serve as an authoritative reference source for health workers and researchers. These guidelines are not intended to replace national guidelines but to assist in the development of national or regional guidelines. They are expected to remain valid for five years (until 2014), although developments in research could change their validity.--Publisher's description.
Author: H. F. van Emden
Publisher: Cambridge University Press
Published: 2004-01-29
Total Pages: 372
ISBN-13: 9780521010832
DOWNLOAD EBOOKThis short, readable textbook is designed to introduce students the biology and techniques of aricultural pest and disease vector control and management. As such, it is unique; no other book attempts to marry together the fields of pest and vector control. The authors are two of the leading authorities in their respective fields and amongst the best known entomologists of their generation.
Author: Ion Boldea
Publisher: CRC Press
Published: 1992-08-26
Total Pages: 254
ISBN-13: 9780849344084
DOWNLOAD EBOOKAlternating current (AC) induction and synchronous machines are frequently used in variable speed drives with applications ranging from computer peripherals, robotics, and machine tools to railway traction, ship propulsion, and rolling mills. The notable impact of vector control of AC drives on most traditional and new technologies, the multitude of practical configurations proposed, and the absence of books treating this subject as a whole with a unified approach were the driving forces behind the creation of this book. Vector Control of AC Drives examines the remarkable progress achieved worldwide in vector control from its introduction in 1969 to the current technology. The book unifies the treatment of vector control of induction and synchronous motor drives using the concepts of general flux orientation and the feed-forward (indirect) and feedback (direct) voltage and current vector control. The concept of torque vector control is also introduced and applied to all AC motors. AC models for drive applications developed in complex variables (space phasors), both for induction and synchronous motors, are used throughout the book. Numerous practical implementations of vector control are described in considerable detail, followed by representative digital simulations and test results taken from the recent literature. Vector Control of AC Drives will be a welcome addition to the reference collections of electrical and mechanical engineers involved with machine and system design.
Author: Frederic Giraud
Publisher: Butterworth-Heinemann
Published: 2019-04-23
Total Pages: 212
ISBN-13: 0128141867
DOWNLOAD EBOOKPiezoelectric Actuators: Vector Control Method: Base, Modeling and Mechatronic Design of Ultrasonic Devices guides researchers and engineers through the process of implementing the vector control method (VCM) in their systems. The book presents which measurements can be made, how to visualize a variable as a rotating vector, about the angular position of the rotating reference frame, how to calculate the parameters of the controllers, and how to observe key variables. Additionally, the book focuses on the modeling of PE ultrasonic transducers and investigates the energy conversion process in an ultrasonic transducer.
Author: Rodrick Wallace
Publisher: Springer
Published: 2018-02-22
Total Pages: 76
ISBN-13: 3319728504
DOWNLOAD EBOOKThe vector-borne Zika virus joins avian influenza, Ebola, and yellow fever as recent public health crises threatening pandemicity. By a combination of stochastic modeling and economic geography, this book proposes two key causes together explain the explosive spread of the worst of the vector-borne outbreaks. Ecosystems in which such pathogens are largely controlled by environmental stochasticity are being drastically streamlined by both agribusiness-led deforestation and deficits in public health and environmental sanitation. Consequently, a subset of infections that once burned out relatively quickly in local forests are now propagating across susceptible human populations whose vulnerability to infection is often exacerbated in structurally adjusted cities. The resulting outbreaks are characterized by greater global extent, duration, and momentum. As infectious diseases in an age of nation states and global health programs cannot, as much of the present modeling literature presumes, be described by interacting populations of host, vector, and pathogen alone, a series of control theory models is also introduced here. These models, useful to researchers and health officials alike, explicitly address interactions between government ministries and the pathogens they aim to control.
Author: Institute of Medicine
Publisher: National Academies Press
Published: 1991-02-01
Total Pages: 312
ISBN-13: 9780309045278
DOWNLOAD EBOOKMalaria is making a dramatic comeback in the world. The disease is the foremost health challenge in Africa south of the Sahara, and people traveling to malarious areas are at increased risk of malaria-related sickness and death. This book examines the prospects for bringing malaria under control, with specific recommendations for U.S. policy, directions for research and program funding, and appropriate roles for federal and international agencies and the medical and public health communities. The volume reports on the current status of malaria research, prevention, and control efforts worldwide. The authors present study results and commentary on the: Nature, clinical manifestations, diagnosis, and epidemiology of malaria. Biology of the malaria parasite and its vector. Prospects for developing malaria vaccines and improved treatments. Economic, social, and behavioral factors in malaria control.
Author: Graham Matthews
Publisher: John Wiley & Sons
Published: 2011-08-17
Total Pages: 242
ISBN-13: 1119950333
DOWNLOAD EBOOKDiseases transmitted by insects continue to have a major impact on human populations. Malaria, dengue, onchocerciasis, sleeping sickness and leishmaniasis all adversely affect man. Malaria is one of the most important causes of child mortality and reduces economic development in many countries, with agricultural productivity often greatly reduced, as many vectors are active in the wet season favourable for crop production. Vector control is crucial to reduce the extent to which drugs are needed to treat the diseases, as the parasite can become resistant, or the drugs are often too expensive for those living in rural areas and urban slums most affected by these diseases. Chemical control of vectors is often the only method that can reduce vector populations in a disease epidemic, but with vectors developing resistance to insecticides, there is increasing awareness that a single control method is often insufficient and also that chemical control must be integrated where possible with other control measures. In Integrated Vector Management, Graham Matthews covers the main chemical methods of vector control, including the use of indoor residual spraying, space treatments, the use of treated bed nets and larviciding, but also stresses the importance of drainage schemes and improvement of houses to prevent access of indoor vectors, techniques that have largely been responsible for reducing the risk of vector borne diseases in Europe and the USA. This book combines practical information from successful vector control programmes, including early use of DDT, and recent research into a vital resource for all those now involved in combating insect vector borne diseases. Integrated Vector Management is an essential tool, not only for medical entomologists and those directly involved in government health departments, but also for all those who provide the skills and management needed to operate successful area-wide vector management programmes. Libraries in all universities and research establishments world-wide, where biological sciences, medicine and agriculture are studied and taught should have multiple copies of this important book.
