Ultra Clean Processing of Silicon Surfaces VI

Ultra Clean Processing of Silicon Surfaces VI

Author: Marc Heyns

Publisher: Trans Tech Publications Ltd

Published: 2003-05-02

Total Pages: 321

ISBN-13: 3035707200

DOWNLOAD EBOOK

Proceedings of the 6h International Symposium on Ultra Clean Processing of Silicon Surfaces (UCPSS 2002), Held in Ostens, Belgium, September 2002


Ultra Clean Processing of Silicon Surfaces VI

Ultra Clean Processing of Silicon Surfaces VI

Author:

Publisher:

Published: 2003

Total Pages: 320

ISBN-13:

DOWNLOAD EBOOK

The issues addressed by the Sixth International Symposium on the Ultra Clean Processing of Silicon Surfaces included all aspects of ultra-clean Si-technology, cleaning and contamination control in both front-end-of-line (FEOL) and back-end-of-line (BEOL) processing. This covered studies of Si-surface chemistry and topography and its relationship to device performance and process yield, cleaning in relationship to new gate stacks, cleaning at the interconnect level, resist stripping and polymer removal, cleaning and contamination control of various new materials, wafer backside cleaning and cleaning following Chemical-Mechanical-Polishing (CMP). Judging from the large number of papers dealing with wet cleaning processes, it is clear that this is still the dominant cleaning technology at the moment. Various papers discussed simplified cleaning by the use of chelating additives, and single-wafer wet cleaning; which is expected to replace the more standard multi-step batch-type cleaning systems, in various applications, in the future. Several contributions dealt with new materials introduced into current process research and development: such as Cu, and especially (porous) low-k material, as well as high-k and metal gate stacks. Substantial progress had also been made in understanding the effects of megasonics, and in the area of cleaning following Chemical-Mechanical Polishing (CMP). Last, but not least, an encouraging number of contributions were presented on the relatively new topic of supercritical CO2 cleaning. Altogether, the 76 contributions presented at the symposium represent a timely and authoritative assessment of the state-of-the-art of this very interesting and essential field.


Analytical and Diagnostic Techniques for Semiconductor Materials, Devices, and Processes

Analytical and Diagnostic Techniques for Semiconductor Materials, Devices, and Processes

Author: Bernd O. Kolbesen

Publisher: The Electrochemical Society

Published: 2003

Total Pages: 572

ISBN-13: 9781566773485

DOWNLOAD EBOOK

.".. ALTECH 2003 was Symposium J1 held at the 203rd Meeting of the Electrochemical Society in Paris, France from April 27 to May 2, 2003 ... Symposium M1, Diagnostic Techniques for Semiconductor Materials and Devices, was part of the 202nd Meeting of the Electrochemical Society held in Salt Lake City, Utah, from October 21 to 25, 2002 ..."--p. iii.


High Purity Silicon VI

High Purity Silicon VI

Author: Electrochemical Society. Meeting

Publisher: The Electrochemical Society

Published: 2000

Total Pages: 720

ISBN-13: 9781566772846

DOWNLOAD EBOOK

"... papers that were presented at the Sixth Symposium on High Purity Silicon held in Phoenix, Arizona at the 198th Meeting of the Electrochemical Society, October 22-27, 2000."--Preface.


Handbook of Semiconductor Manufacturing Technology

Handbook of Semiconductor Manufacturing Technology

Author: Yoshio Nishi

Publisher: CRC Press

Published: 2017-12-19

Total Pages: 1720

ISBN-13: 1420017667

DOWNLOAD EBOOK

Retaining the comprehensive and in-depth approach that cemented the bestselling first edition's place as a standard reference in the field, the Handbook of Semiconductor Manufacturing Technology, Second Edition features new and updated material that keeps it at the vanguard of today's most dynamic and rapidly growing field. Iconic experts Robert Doering and Yoshio Nishi have again assembled a team of the world's leading specialists in every area of semiconductor manufacturing to provide the most reliable, authoritative, and industry-leading information available. Stay Current with the Latest Technologies In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on... Silicon-on-insulator (SOI) materials and devices Supercritical CO2 in semiconductor cleaning Low-κ dielectrics Atomic-layer deposition Damascene copper electroplating Effects of terrestrial radiation on integrated circuits (ICs) Reflecting rapid progress in many areas, several chapters were heavily revised and updated, and in some cases, rewritten to reflect rapid advances in such areas as interconnect technologies, gate dielectrics, photomask fabrication, IC packaging, and 300 mm wafer fabrication. While no book can be up-to-the-minute with the advances in the semiconductor field, the Handbook of Semiconductor Manufacturing Technology keeps the most important data, methods, tools, and techniques close at hand.


Particles on Surfaces Five and Six

Particles on Surfaces Five and Six

Author: Kashmiri Lal Mittal

Publisher: VSP

Published: 1999-09

Total Pages: 366

ISBN-13: 9789067643122

DOWNLOAD EBOOK

This volume documents the Proceedings of the 5th and 6th Symposia on Particles on Surfaces: Detection, Adhesion and Removal, held under the aegis of the Fine Particle Society in Chicago (May 6--9, 1996) and Dallas (April 1--3, 1998), respectively. The technical programs clearly reflected an interest and need to ameliorate the existing methods and to devise new and more efficient ways to detect, analyze and characterize particles on surfaces. The removal of particles from a host of surfaces was especially highlighted; the need to remove smaller and smaller particles was particularly underscored. All manuscripts included in this volume were properly peer reviewed and all were revised before inclusion in this volume. Thus, this book is not a mere collection of unreviewed papers, but represents information that has passed peer scrutiny. Furthermore, the authors of the 5th Symposium were asked to update the information. So, the information presented in this book should be as fresh and up-to-date as possible. This volume is divided into two parts: Part 1. General Papers and Part 2. Particle Adhesion and Removal. The topics covered include: high-sensitivity rapid detection of particles; detection of particles using evanescent wave scattering; particles on the backside of wafers; particle shedding from fluid-handling components; dynamics of particle adhesion; particle dispersion/aggregation; precision cleaning; and particle removal by surfactants, supercritical fluids, hydrodynamic forces, high-speed droplet impinging, megasonic, CO2 blasting, CO2 snow, argon aerosol, lasers, microcluster beams, brush and chemical-mechanical methods. This volume offers bountiful information and represent a current commentary on the R&D activity taking place in the area of particles on surfaces, particularly particle removal from a variety of surfaces.


Handbook for cleaning/decontamination of surfaces

Handbook for cleaning/decontamination of surfaces

Author: Ingegard Johansson

Publisher: Elsevier

Published: 2007-06-20

Total Pages: 994

ISBN-13: 0080555535

DOWNLOAD EBOOK

The focus of Handbook for Cleaning/Decontamination of Surfaces lies on cleaning and decontamination of surfaces and solid matter, hard as well as soft. Bringing together in a 2-volume reference source: - current knowledge of the physico-chemical fundamentals underlying the cleaning process; - the different needs for cleaning and how these needs are met by various types of cleaning processes and cleaning agents, including novel approaches; - how to test that cleaning has taken place and to what extent; - the effects of cleaning on the environment; - future trends in cleaning and decontamination, for example the idea of changing surfaces, to hinder the absorbance of dirt and thus make cleaning easier.A brief introduction is given to the legal demands concerning the environment and a historical background, in terms of development of detergents, from soaps to the modern sophisticated formulations. Bactericides, their use and the environmental demands on them are covered. Thorough discussions of mechanisms for cleaning are given in several chapters, both general basic concepts and special cases like particle cleaning and cleaning using microemulsion concepts.* General understanding of how cleaning works, function of ingredients and formulations * Overview of environmental issues and demands from the society in the area * Gives basic formulas for cleaning preparations in most areas