Read and Download eBook Full
Author: Hugh MacInnes
Publisher: Penguin
Published: 1987-01-01
Total Pages: 164
ISBN-13: 9780895861351
DOWNLOAD EBOOKProvides instruction in installing turbochargers, surveys the design, manufacture, and testing of turbocharger kits, and explains the economy and other advantages of turbocharging small engines
Author: Jay K. Miller
Publisher: CarTech Inc
Published: 2008
Total Pages: 162
ISBN-13: 1932494294
DOWNLOAD EBOOKAutomotive technology.
Author: Hung Nguyen-Schäfer
Publisher: Springer Science & Business Media
Published: 2012-03-06
Total Pages: 327
ISBN-13: 3642275184
DOWNLOAD EBOOKThis book deals with rotordynamics of automotive turbochargers while encompassing the analysis of the dynamics of rotating machines at very high rotor speeds of 300,000 rpm and above. This interdisciplinary field involves 1. thermodynamics and turbo-matching knowledge to compute working conditions of turbochargers, 2. fluid and bearing dynamics to calculate various operating thrust loads and to design the rotating floating ring bearings (two-oil-film bearings), and 3. tribology to improve the rotor stability and to reduce the bearing friction. Mathematical background in modeling and simulation methods is necessary; however, the prerequisites have been kept to a minimum. The book addresses both practitioners working in the field of rotordynamics of automotive turbochargers and graduate students in mechanical engineering.
Author: Evangelos G. Giakoumis
Publisher: Nova Science Publishers
Published: 2017
Total Pages: 0
ISBN-13: 9781536122398
DOWNLOAD EBOOKSupercharging has long been established as the most successful means to maximise power output from a specific engine size. Through supercharging, the inlet air density is increased, usually by means of a compressor, and by doing so the amount of air trapped in the cylinders is increased accordingly. As a result, efficient burning of a proportionately higher amount of fuel is enabled. By far, the most successful version of supercharging is turbocharging. Here, the expansion in a turbine of the exhaust gases leaving the cylinders supplies the power needed to drive the compressor. At the moment, practically all diesel engines are turbocharged, with a continuously increasing penetration in the highly competitive market of SI-powered vehicles. The current book on turbochargers and turbocharging, comprising fifteen chapters, gathers important and novel research on many modern aspects of turbocharging for all kinds of gasoline and diesel-powered engine applications (automotive, truck, marine and aircraft). For example, characterisation of the value proposition of turbocharged vehicles, marine engines turbo-compounding, fundamental issues of turbocharger lag and its relation with engine-out PM emissions, variable geometric compressors, automotive two-stage turbocharging, and dynamic operation of turbochargers including VGT and surging effects are amongst the topics analysed. Review papers form a very important part of the book, namely the discussion and in-depth analysis of various automotive boosting systems, turbocharger reduced-order modeling, heat transfer and pulsating flows in turbomachinery, mathematical models for turbocharged engines, and turbomachine-based engine throttling. A considerable portion of the book (seven chapters) deals with control-oriented modeling techniques relating to the turbocharger and/or the whole engine power-plant. Such models have proven valuable during the design of both turbochargers and turbocharged engines, and are described and discussed in detail for a variety of automotive and aircraft applications. The book is written for post-graduate students, engineers and researchers in the field of internal combustion engines (diesel and SI) and turbochargers.
Author: Institution of Mechanical Engineers
Publisher: CRC Press
Published: 2020-09-30
Total Pages: 390
ISBN-13: 1000316777
DOWNLOAD EBOOK14th International Conference on Turbochargers and Turbocharging addresses current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The contributions focus on the development of air management solutions and waste heat recovery ideas to support thermal propulsion systems leading to high thermal efficiency and low exhaust emissions. These can be in the form of internal combustion engines or other propulsion technologies (eg. Fuel cell) in both direct drive and hybridised configuration. 14th International Conference on Turbochargers and Turbocharging also provides a particular focus on turbochargers, superchargers, waste heat recovery turbines and related air managements components in both electrical and mechanical forms.
Author: Institution of Mechanical Engineers
Publisher: Elsevier
Published: 2012-05-11
Total Pages: 456
ISBN-13: 0857096133
DOWNLOAD EBOOKThis book presents the papers from the latest international conference, following on from the highly successful previous conferences in this series held regularly since 1978. Papers cover all current and novel aspects of turbocharging systems design for boosting solutions for engine downsizing. The focus of the papers is on the application of turbocharger and other pressure charging devices to spark ignition (SI) and compression ignition (CI) engines in the passenger car and commercial vehicles. Novel boosting solutions for diesel engines operating in the industrial and marine market sectors are also included.The current emission legislations and environmental trends for reducing CO2 and fuel consumption are the major market forces in the transport (land and marine) and industry sectors. In these market sectors the internal combustion engine is the key product where downsizing is the driver for development for both SI and CI engines in the passenger car and commercial vehicle applications. The more stringent future market forces and environmental considerations mean more stringent engine downsizing, thus, novel systems are required to provide boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems for high efficiency, response, reliability, durability and compactness etc. For large engines the big challenge is to enhance the high specific power and efficiency whilst reducing emission levels (Nox and Sox) with variable quality fuels. This will require turbocharging systems for very high boost pressure, efficiency and a high degree of system flexibility. - Presents papers from all the latest international conference - Papers cover all aspects of the turbocharging systems design for boosting solutions for engine downsizing - The focus of the papers is on the application of turbocharger and other pressure charging devices to spark ignition (SI) and compression ignition (CI) engines in the passenger car and commercial vehicles
Author: IMechE
Publisher: Elsevier
Published: 2014-08-25
Total Pages: 497
ISBN-13: 0081000340
DOWNLOAD EBOOKThe future market forces and environmental considerations in the passenger car and commercial vehicle sector mean more stringent engine downsizing is far more prevalent. Therefore, novel systems are required to provide boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems for high efficiency, response, reliability, durability and compactness. The current emission legislations and environmental trends for reducing CO2 and fuel consumption are the major market forces in the land and marine transport industries. The internal combustion engine is the key product and downsizing, efficiency and economy are the driving forces for development for both spark ignition (SI) and compression ignition (CI) engines in both markets. Future market forces and environmental considerations for transportation, specifically in the passenger car, commercial vehicle and the marine sectors mean more stringent engine downsizing. This international conference is the latest in the highly successful and prestigious series held regularly since 1978. These proceedings from the Institution's highly successful and prestigious series address current and novel aspects of turbocharging systems design, boosting solutions for engine downsizing and improvements in efficiency, and present the latest research and development in this growing and innovative area. - Focuses on boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems - Explores the current need for high efficiency, reliability, durability and compactness in recovery systems - Examines what new systems developments are underway
Author: Institution of Mechanical Engineers
Publisher: CRC Press
Published: 2023-05-05
Total Pages: 341
ISBN-13: 1000964000
DOWNLOAD EBOOKThe Institution’s International Conference on Turbochargers and Turbocharging (Twickenham, London, UK, 16-17 May 2023) returns to address the latest advances, research and developments in turbocharging system designs and boosting solutions. This volume presents a peer-reviewed collection of papers which will address current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The latest developments leading to enhanced performance and efficiency, increased durability and reduced emissions in line with meeting Net-Zero and global emissions targets. Topics include: Air management in powertrains: conventional, hybrids, fuel cells and novel configurations Alternate fuels and their needs in boosting (e.g. hydrogen, synthetic fuels) Electrification of turbochargers, compressors, and exhaust turbines Simulation and testing techniques, data analytics, including AI and digital twins Thermal management, waste heat recovery and expanders Turbomachinery aerodynamic: novel compressors & turbines and multi-stage systems. Component fatigue life, bearing design, rotor-dynamics and durability prediction Mechatronics, control, sensors and power electronics High speed turbomachinery in propulsion and power systems Future Legislation needs for thermal propulsion systems
Author: Hung Nguyen-Schäfer
Publisher: Springer Science & Business Media
Published: 2013-01-06
Total Pages: 145
ISBN-13: 3642350704
DOWNLOAD EBOOKAero and Vibroacoustics of Automotive Turbochargers is a topic involving aspects from the working fields of thermodynamics of turbomachinery, aerodynamics, rotordynamics, and noise propagation computation. In this broadly interdisciplinary subject, thermodynamics of turbomachinery is used to design the turbocharger and to determine its operating conditions. Aerodynamics is needed to study the compressor flow dynamics and flow instabilities of rotating stall and surge, which can produce growling and whining-type noises. Rotordynamics is necessary to study rotor unbalance and self-excited oil-whirl instabilities, which lead to whistling and constant tone-type noises in rotating floating oil-film type bearings. For the special case of turbochargers using ball bearings, some high-order harmonic and wear noises also manifest in the rotor operating range. Lastly, noise propagation computation, based on Lighthill’s analogy, is required to investigate airborne noises produced by turbochargers in passenger vehicles. The content of this book is intended for advanced undergraduates, graduates in mechanical engineering, research scientists and practicing engineers who want to better understand the interactions between these working fields and the resulting impact on the interesting topic of Aero and Vibroacoustics of Automotive Turbochargers.
Author: IMechE
Publisher: Elsevier
Published: 2016-06-15
Total Pages: 372
ISBN-13: 184569709X
DOWNLOAD EBOOKBuilding on the success of an established series of successful conferences held every four years since 1978, 8th International Conference on Turbochargers and Turbocharging presents the latest technologies relating to engine pressure charging systems from international industry and academic experts in the field, covering new developments in compressors and novel intake systems; Improved models for cycle simulation; Electro boost systems; Industry trends and requirements; Turbines and mechanical aspects such as thermomechanical analysis, dynamics, and axial load capacity. - Discusses the latest technologies relating to engine pressure charging systems - Looks at mechanical aspects such as thermomechanical analysis, dynamics, and axial load capacity
