Tubular Structures X
Tubular Structures X

Author: Angel Alonso

Publisher: Routledge

Published: 2017-10-02

Total Pages: 640

ISBN-13: 1351406760

DOWNLOAD EBOOK

This volume contains the Kurobane lecture and proceedings of the Tenth International Symposium on Tubular Structures - ISTS10, held in Madrid, Spain, 18-20 September 2003. The ISTS10 provides a platform for the presentation and discussion of seventy-three lectures covering themes including: bridges; roofs; design aspects and case studies; static joint behaviour; fatigue; members; beam-column connections; finite element methods; concrete filled tubes; trusses and frames; cast nodes; and behaviour of tubular structures under fire. This book provides a useful reference work for architects, civil and mechanical engineers, designers, manufacturers and contractors involved with tubular structures.

Tubular Structures XIII
Tubular Structures XIII

Author: Ben Young

Publisher: CRC Press

Published: 2010

Total Pages: 0

ISBN-13: 9780415584739

DOWNLOAD EBOOK

This paper presents a series of test results carried out on elliptical Concrete-Filled Tube (CFT) columns. The tests were conducted to investigate the effects of variations of concrete strength and column slenderness on the behaviour and axial strength of the columns. The experimental study was carried out on ten specimens of short and long columns with Self-Consolidating Concrete (SCC). One elliptical steel section was used with three different typical concrete strengths to determine the reduction of column strength with the increase in column length. All specimens were tested to failure to assess their load carrying capacity, deformation and structural behaviour.

Cold-formed Tubular Members and Connections
Cold-formed Tubular Members and Connections

Author: Greg Hancock

Publisher: Elsevier

Published: 2005-08-17

Total Pages: 255

ISBN-13: 008052933X

DOWNLOAD EBOOK

Cold formed structural members are being used more widely in routine structural design as the world steel industry moves from the production of hot-rolled section and plate to coil and strip, often with galvanised and/or painted coatings. Steel in this form is more easily delivered from the steel mill to the manufacturing plant where it is usually cold-rolled into open and closed section members.This book not only summarises the research performed to date on cold form tubluar members and connections but also compares design rules in various standards and provides practical design examples.

International Integrated Engineering Summit 2014
International Integrated Engineering Summit 2014

Author: Al Emran Ismail

Publisher: Trans Tech Publications Ltd

Published: 2015-07-15

Total Pages: 1600

ISBN-13: 3038269441

DOWNLOAD EBOOK

Selected, peer reviewed papers from the 1st International Integrated Engineering Summit (IIES 2014), December 1-4, 2014, Batu Pahat, Malaysia