Training Circular TC 21-306 Tracked Combat Vehicle Driver Training June 2019

Training Circular TC 21-306 Tracked Combat Vehicle Driver Training June 2019

Author: United States Government Us Army

Publisher:

Published: 2019-07-03

Total Pages: 64

ISBN-13: 9781077930896

DOWNLOAD EBOOK

This manual, Training Circular TC 21-306 Tracked Combat Vehicle Driver Training June 2019, provides unit commanders and unit master drivers with guidance on developing tracked, combat vehicle driver training programs for their organizations. This TC provides guidance on how to integrate drivers training programs into unit gunnery training and other routine duties and tasks of units equipped with tracked combat vehicles. This manual provides units with resources and guidance to support training that promotes safe driving practices, accident avoidance, and technical competence to produce more lethal and effective combat vehicle crews. Hands-on training in a controlled environment and under the close supervision of qualified and licensed trainers is stressed throughout this TC.TC 21-306 applies to the Active Army, Army National Guard/Army National Guard of the United States and United States Army Reserve unless otherwise stated.Leaders must emphasize driver training within their organizations because of the length, width, and high ground pressure of tracked combat vehicles, the terrain tracked combat vehicles are required to operate in, and the numerous blind spots associated with tracked combat vehicles. These variables demand additional skills and knowledge beyond those required for tactical wheeled vehicles. Unit drivers training programs must challenge drivers to use safe driving practices, increase their awareness to improve accident avoidance, and improve crew performance. Programs must train drivers to understand the operational limitations of the vehicles they are operating so they can negotiate complex terrain under difficult and stressful conditions.This TC covers critical information ranging from vehicle operations to considerations for reducing the risk of environmental damage during training.This TC consists of three chapters. The chapters contain the following information: Chapter 1 describes a system for identifying, selecting, and qualifying tracked vehicle driver instructors, vehicle drivers, and planning considerations for unit programs and training events.Chapter 2 discusses vehicle or equipment introductory training, operator technical manual familiarization, vehicle preventive maintenance checks and services procedures, instrumentation familiarization, placing vehicles into operation, self-recovery procedures, and guidance on meshing unit gunnery, and drivers training requirements.Chapter 3 highlights the dangers and safety risks associated with operating tracked combat vehicles as well the environmental hazards that tracked combat vehicles pose. The chapter provides guidance on how to mitigate these risks to personnel and the operating environment.


Training Circular Tc 21-305-4

Training Circular Tc 21-305-4

Author: United States Government Us Army

Publisher: Createspace Independent Publishing Platform

Published: 2017-02-25

Total Pages: 134

ISBN-13: 9781544130163

DOWNLOAD EBOOK

Training Circular TC 21-305-4 Training Program For The High Mobility Multipurpose Wheeled Vehicle This training circular (TC) provides standardized driver training and testing for the high mobility multipurpose wheeled vehicle (HMMWV) operator in accordance with AR 600-55. It stresses hands-on training with minimal classroom instruction. It does not include any theater-unique requirements. This TC teaches the novice (inexperienced) driver to operate the HMMWV. It also can be used to teach the apprentice driver. (The apprentice driver is a driver that has been driving military vehicles for at least one year.) The apprentice driver may learn to operate the HMMWV in less time than the novice, assuming that skills learned on other military vehicles are positive skills transferable to operating a HMMWV.


Training Circular Tc 21-305-20 / Afman 24-306(i) Manual for the Wheeled Vehicle Operator January 2016

Training Circular Tc 21-305-20 / Afman 24-306(i) Manual for the Wheeled Vehicle Operator January 2016

Author: United States Government Us Army

Publisher: Createspace Independent Publishing Platform

Published: 2016-02-02

Total Pages: 364

ISBN-13: 9781523828715

DOWNLOAD EBOOK

This publication, Training Circular TC 21-305-20 / AFMAN 24-306(I) Manual for the Wheeled Vehicle Operator January 2016, provides instructions to help the wheeled vehicle operator maintain a high degree of driving efficiency. This TC does not restrict its contents to any one particular vehicle. It is a guide to normal every day operations and to driving under difficult conditions. When more information is needed for a specific vehicle, check the technical manual (TM) or technical order (TO) written for that vehicle. Today's military operator does considerably more than just drive and has a requirement to master every aspect of the vehicle's capabilities and limitations to include all current sub-components such as technologically advanced communications, navigation, intercom systems, onboard material handling cranes, self-recovery winches, integrated night-vision devices, weapons support systems, onboard electronic diagnostic systems, and load responsibility. Leaders can use a variety of methods and environments to train and practice the safe operation of Army motor vehicles in accordance with this training circular.


Training Circular Tc 21-305-5

Training Circular Tc 21-305-5

Author: United States Government Us Army

Publisher: Createspace Independent Publishing Platform

Published: 2017-02-25

Total Pages: 302

ISBN-13: 9781544122694

DOWNLOAD EBOOK

Training Circular TC 21-305-5 Training Program For Equipment Transporters (C-Het, Met, And Let The driver of a light-, medium-, or heavy-equipment transporter is charged with an awesome responsibility. Not only will he be driving one of the largest vehicles in the Army's vehicle fleet but also one of the heaviest vehicles. Therefore, as a prerequisite, the individual must have been qualified and licensed to operate a 5-ton tractor and semitrailer for at least one year before receiving a license to operate an equipment transporter. Therefore, this TC provides standardized driver training and testing for the light-, medium-, and heavy-equipment transporter operator. This TC stresses hands-on training with minimal classroom instruction. It does not include any theater unique requirements. The lesson outlines are used to teach the novice (inexperienced) driver to operate the light-, medium-, and/or heavy-equipment transporter. They can also be used to teach the apprentice driver. (The apprentice driver is defined as a driver that has been driving military vehicles for at least one year.) The apprentice driver may learn to operate the light-, medium-, and/or heavy equipment transporter in less time than the novice assuming that skills learned on other military vehicles are positive skills transferable to operating light-, medium-, and/or heavy-equipment transporter.


Training Circular Tc 21-305-8 Training Program for Medium Vehicles

Training Circular Tc 21-305-8 Training Program for Medium Vehicles

Author: United States Government US Army

Publisher: Createspace Independent Publishing Platform

Published: 2017-02-28

Total Pages: 194

ISBN-13: 9781544188300

DOWNLOAD EBOOK

Training Circular TC 21-305-8 Training Program For Medium Vehicles This training circular (TC) provides a training program for the wheeled vehicle operator of medium vehicles (straight vehicles, 5 ton and greater), in accordance with Army Regulation (AR) 600-55. It can be used to train drivers of tactical or commercially- designed vehicles. Instructions in this TC are written in general terms because they include driver tasks for several vehicles. Therefore, use the appropriate vehicle operator's manual in conjunction with this TC. While developing this TC, each driver candidate was assumed to have a state driver's license and some past driving experience. Less experienced soldiers will need additional subjects and time to train to the standard. This TC provides standardized training and testing in the operation, maintenance, and safety of medium wheeled vehicles. It stresses hands-on training with minimal classroom instruction. It does not include any theater-unique requirements. To provide effective training, each instructor should ensure his operators are trained and tested to the standards in this TC. Any deviation from successfully completing these basic standards will only decrease the soldiers' overall driving effectiveness. This training program offers commanders some alternatives. Chapter 7 contains training and testing for drivers transporting personnel in trucks; Chapter 8, for drivers transporting personnel in buses. For safety reasons, all drivers should be tested on the End Of Course Comprehensive Test (EOCCT) (Chapter 6) before proceeding to Chapters 7 or 8. Also, Chapter 9 includes additional subjects that can be added at the commander's discretion based on the unit's mission. Graduates (licensed drivers) of this training program should be supervised until they have gained the experience to operate safely. They should not be placed in situations that may be above their skill level. Periodically, the supervisor should ride with each driver to observe safe operating procedures and to determine the need for more training.


Training Circular Tc 21-305-7 Training Program for Light Vehicles

Training Circular Tc 21-305-7 Training Program for Light Vehicles

Author: United States Government Us Army

Publisher: Createspace Independent Publishing Platform

Published: 2017-02-23

Total Pages: 142

ISBN-13: 9781543289671

DOWNLOAD EBOOK

Training Circular TC 21-305-7 Training Program For Light Vehicles This training circular (TC) provides a training program for the wheeled vehicle operator of light vehicles (2 1/2 tons or less) in accordance with AR 600-55. It provides standardized training and testing in the operation, maintenance, and safety of light vehicles. It can be used to train drivers of tactical or commercially designed vehicles. It stresses hands-on training with minimal classroom instruction, but it does not include any theater-unique requirements. Instructions are written in general terms because this TC includes driver tasks for several vehicles. For this reason, the appropriate vehicle operator's manual must be used along with this training circular. During the development of this TC, it was assumed that each driver candidate would have a state driver's license and some past driving experience. Less experienced soldiers will require additional subjects and time to train to these standards. To provide effective training, each instructor should ensure his operators are trained and tested to the standards contained in this TC. Any deviation from the successful completion of these basic standards will only lessen the soldiers' overall driving effectiveness. This training program offers some alternatives for the commander. Chapter 5 includes additional subjects to allow the flexibility to add subjects based on the mission of the unit. Graduates of this training program (licensed drivers) should be supervised until they have gained the experience to operate safely. They should not be placed in situations that may be above their skill level. Periodically, the supervisor should ride with each driver to observe safe operating procedures and to determine the need for additional training.


Stryker Driver Training

Stryker Driver Training

Author: U. S. Army Training And Doctrine Command

Publisher:

Published: 2011-11

Total Pages: 98

ISBN-13: 9781780399546

DOWNLOAD EBOOK

TC 7-21 is organized into the following eight chapters and four appendixes that provide Stryker driver training strategies and training support materials: Chapter 1, Introduction, explains the purposes, focus, and contents of the manual.Chapter 2, Driver Selection, Training, and Supervision, describes a system for identifying, selecting, and qualifying Stryker vehicle drivers. Chapter 3, Safety Awareness, examines the safeguards necessary to ensure vehicle operators do not place the physical well-being of people in jeopardy. Chapter 4, Environmental Awareness, examines the safeguards necessary to ensure the environment is not placed in jeopardy by vehicle operators. Chapter 5, How to Use Training Support Packages (TSPs), describes the learning objectives of TSPs and how to access them for use. Chapter 6, Stryker Drivers Vision Enhancer AN/VAS-5, explains Stryker driver use of the DVE. Chapter 7, Stryker Driver Trainer, explains Stryker driver use of the Stryker Driver Trainer. Chapter 8, Driving with Slat Armor, describes the vehicle's attachable armor commonly in use. Appendix A, Stryker Combat Vehicle Driver TSPs, lists all available TSPs. Appendix B, Sample Operator/Driver Training Schedule Calendar (10 Day), contains a sample training calendar for adaptation and use. Appendix C, Stryker Driver Training Courses, discusses training course design and procedures.Appendix D, Lessons Learned, uses a Stryker-comparable U.S. Marine Lessons Learned LAV report of experiences in Iraq.


School Training of Tracked Combat Vehicle Drivers

School Training of Tracked Combat Vehicle Drivers

Author: James M. Buckley

Publisher:

Published: 1965

Total Pages:

ISBN-13:

DOWNLOAD EBOOK

Problem: To determine whether the tracked combat vehicle driver should be school trained and awarded an appropriate track vehicle driver military occupational specialty (MOS) rating.


Training Circular Tc 7-21 Stryker Driver Training December 2006

Training Circular Tc 7-21 Stryker Driver Training December 2006

Author: United States Government US Army

Publisher: Createspace Independent Pub

Published: 2012-09-16

Total Pages: 100

ISBN-13: 9781479325641

DOWNLOAD EBOOK

Training Circular TC 7-21 provides standardized driver training and testing for Stryker operators in accordance with AR 600-55, The Army Driver and Operator Standardization Program. It teaches novice (inexperienced) and apprentice (one year of military vehicle driving experience) drivers to operate the Stryker vehicle. An apprentice driver may learn to operate the Stryker in less time than the novice, assuming skills learned on other military vehicles are transferable to Stryker operation. Leaders must emphasize driver training because high-technology Stryker vehicles demand greater driver skills and knowledge. This TC does not include any theater-unique requirements. It stresses hands-on training with minimal classroom instruction. Stryker drivers must know how to operate the vehicle's equipment effectively in all environments. They must be challenged to use safe driving practices and increase their awareness of accident avoidance. This TC is designed to accommodate these skills by providing: • Leadership tools needed to meet the challenge of producing quality Stryker drivers. • An introduction to Stryker simulated training. • Guidance on the use and accessing of lesson outlines. • Written and hands-on performance tests. • Listings of supporting training materials for all Stryker vehicles. • The latest techniques to enhance Stryker driver driving skills. • Slat armor attachment. TC 7-21 is organized into the following eight chapters and four appendixes that provide Stryker driver training strategies and training support materials: • Chapter 1, Introduction, explains the purposes, focus, and contents of the manual. • Chapter 2, Driver Selection, Training, and Supervision, describes a system for identifying, selecting, and qualifying Stryker vehicle drivers. • Chapter 3, Safety Awareness, examines the safeguards necessary to ensure vehicle operators do not place the physical well-being of people in jeopardy. • Chapter 4, Environmental Awareness, examines the safeguards necessary to ensure the environment is not placed in jeopardy by vehicle operators. • Chapter 5, How to Use Training Support Packages (TSPs), describes the learning objectives of TSPs and how to access them for use. • Chapter 6, Stryker Drivers Vision Enhancer AN/VAS-5, explains Stryker driver use of the DVE. • Chapter 7, Stryker Driver Trainer, explains Stryker driver use of the Stryker Driver Trainer. • Chapter 8, Driving with Slat Armor, describes the vehicle's attachable armor commonly in use. • Appendix A, Stryker Combat Vehicle Driver TSPs, lists all available TSPs. • Appendix B, Sample Operator/Driver Training Schedule Calendar (10 Day), contains a sample training calendar for adaptation and use. • Appendix C, Stryker Driver Training Courses, discusses training course design and procedures. • Appendix D, Lessons Learned, uses a Stryker-comparable U.S. Marine Lessons Learned LAV report of experiences in Iraq. To effectively execute this TC each instructor should ensure their Stryker operators are trained and tested to the standards contained within it. Graduates (licensed drivers) of this Stryker driver training program should be supervised until they gain the experience necessary to operate safely. Recent graduates should not be placed in situations that exceed their skill levels. Supervisors should periodically ride with each driver to observe safe operating procedures, and to determine any need for additional training. This publication applies to the Active Army, the Army National Guard/Army National Guard of the United States, and the United States Army Reserve unless otherwise stated.


Training Circular TC 21-305-11 Training Program for the Family of Medium Tactical Vehicles Operator May 1999

Training Circular TC 21-305-11 Training Program for the Family of Medium Tactical Vehicles Operator May 1999

Author: United States Government US Army

Publisher:

Published: 2017-01-20

Total Pages: 172

ISBN-13: 9781542657709

DOWNLOAD EBOOK

Training Circular TC 21-305-11 Training Program for the Family of Medium Tactical Vehicles Operator May 1999This TC provides a training program for the Family of Medium Tactical Vehicles (FMTV cargo variants) vehicle operator according to AR 600-55. It was designed for the Medium Tactical Vehicle 5-ton cargo truck, but also may be used for the Light Medium Tactical Vehicles 2 1/2-ton cargo variant. It provides standardized training and testing in the operation, maintenance, and safety of this vehicle. It stresses hands-on training with minimal classroom instruction and does not include any theater-unique requirements. Additionally, during the development of this TC, it was assumed that each driver candidate would have a state driver's license, have completed accident avoidance training according to TC 21-305, and possess an OF 346 Learners Permit.The lesson content for this training program is arranged sequentially and separated into three chapters (Chapters 4, 5, and 7). Chapter 4 contains training for driving operations and Chapter 5 for trailer operations. Testing is contained in Chapter 7. For those operators trained on truck operations, testing is conducted after the training in Chapter 4. Operators that are trained in trailer operations are tested after receiving all training in Chapters 4 and 5. This allows the commander the flexibility to tailor 5-ton operator training based on the unit's equipment. Additionally, all training should be annotated on DA Form 348, Equipment Operator's Qualification Record (or ULLS generated DA Form 348-E) according to AR 600-55.