Department of Defense Refractory Metals Sheet Rolling Program
Department of Defense Refractory Metals Sheet Rolling Program

Author: D. J. Maykuth

Publisher:

Published: 1965

Total Pages: 48

ISBN-13:

DOWNLOAD EBOOK

This report is the third of a series which will periodically summarize the status of the various contracts involved in the Department of Defense Refractory Metals Sheet Rolling Program. Under this program, selected candidate materials are being carried through one or more of the following consecutive phases: Phase I, development of a sheet-production practice; Phase II, establishment of minimum design data; and Phase III, evaluation of sheetfabrication characteristics. To the present time, 13 contracts have been funded or planned in support of the Phase I, II, and III activities. This report summarizes the status of each of these individual contracts as of November 1, 1964. The first section describes the overall program of the Department of Defense Refractory Metals Sheet Rolling Program. Following, in the order of their discussions, are sections dealing with fabricable molybdenum alloys, unalloyed tungsten, columbium alloys, and tantalum alloys. (Author).

Surface Damage in Machined Beryllium
Surface Damage in Machined Beryllium

Author: Stanley W. Porembka

Publisher:

Published: 1965

Total Pages: 18

ISBN-13:

DOWNLOAD EBOOK

A review of machining damage effects in beryllium was made. Surface damage is caused by twinning and microcracking as a result of various machining operations. Twinning is a result of surface working while microcracks initiate at intersections of twins and grain boundaries, at twin-matrix interfaces, at impurity particles, and in heavily twinned regions. These phenomena may be due to residual stresses in wrought products as well as machining parameters such as tool type, feed, and speed and depth of cut. The loss of mechanical properties due to machining damage is reviewed. Also presented is a study of surface damage actually encountered with machining of the shingles for the Gemini spacecraft.

Scientific and Technical Aerospace Reports
Scientific and Technical Aerospace Reports

Author:

Publisher:

Published: 1991

Total Pages: 1460

ISBN-13:

DOWNLOAD EBOOK

Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Status Report No. 2 on Department of Defense Refractory Metals Sheet-rolling Program
Status Report No. 2 on Department of Defense Refractory Metals Sheet-rolling Program

Author: H. R. Ogden

Publisher:

Published: 1962

Total Pages: 54

ISBN-13:

DOWNLOAD EBOOK

The Nb program is nearing completion of laboratory tory rolling studiory materials, *Heat resistant alloys, *Sheets, Niobium alloys, Molybdenum alloys, Tantalum alloys, Tungsten alloys, Titanium alloys, Zirconium alloys, Tungsten, Powder metallurgy, Electric arcs, Manufacturing methods, Mechanical proper ies, Forging, Heat treatment, Melting, Extrusion, Deformation, Hardness, Rolling mills, Processing. Identifiers: Floturning. The Nb program is nearing completion of laboratory tory rolling studies, and a single composition for larger scale rolling studies will be selected in the near future. In the Mo program, it has been shown that true hot forging of billets to sheet bar results in higher recrystallization temperatures of TZM and Mo-0.5Ti sheet than are obtained when normal forging temperatures are used. The Ta program is in the early stages of ingot production and primary breakdown fabrication of the Ta-30Nb-7.5V alloy. Three methods of fabricating W sheet are being investigated: rolling of powder-metallurgy billets, fabrication of arc-melted ingots, and floturning of cylindrical blanks. Properties obtained on both powdermetallurgy and arc-melted tungsten sheet compare very favorably. Evaluation of the formability of Mo-alloy sheet has been delayed until sheet is available from the production program. (Author).