The Micro-hydro Pelton Turbine Manual

The Micro-hydro Pelton Turbine Manual

Author: Jeremy Thake

Publisher: Intermediate Technology

Published: 2000

Total Pages: 180

ISBN-13: 9781853394607

DOWNLOAD EBOOK

Where flow is limited but high heads of water are available the Pelton wheel is one of the most useful turbines. It can be fabricated in small engineering shops with basic facilities. Jeremy Thake explains how to design, make and use them.


Pumps as Turbines

Pumps as Turbines

Author: Armando Carravetta

Publisher: Springer

Published: 2017-10-24

Total Pages: 226

ISBN-13: 3319675079

DOWNLOAD EBOOK

This book provides users, pump manufactures, engineers, researchers and students with extensive information about pump’s behavior in reverse operation. It reports on cutting-edge methods for selecting the proper PAT and improving PAT’s efficiency, discusses PAT’s reliability, economic issues and environmental impact as well. The book describes in detail electromechanical equipment of PAT systems, their installation and operation, and gives important practical insight into the use of PAT in water transmission and distribution systems, as part of thermal power plants and cooling systems, in oil distribution systems and other systems as well. It reports on different types on PAT control modes as well as on numerical methods useful for PAT analysis and implementation. All in all, the book represents a comprehensive practice-oriented reference-guide to design engineers, as well as PAT general users and manufactures. It also provides researchers with extensive technical information on the use of PAT thus fostering new discussions and ideas to improve current methods and cope with future challenges.


Micro-hydro Design Manual

Micro-hydro Design Manual

Author: Adam Harvey

Publisher: Intermediate Technology

Published: 1993-01

Total Pages: 374

ISBN-13: 9781853391033

DOWNLOAD EBOOK

Micro-Hydro Design Manual has grown from Intermediate Technology's field experiences with micro-hydro installations and covers operation and maintenance, commissioning, electrical power, induction generators, electronic controllers, management, and energy surveys.There is an increasing need in many countries for power supplies to rural areas, partly to support industries, and partly to provide illumination at night. Government authorities are faced with the very high costs of extending electricity grids. Often micro-hydro provides an economic alternative to the grid. This is because independentmicro-hydro schemes save on the cost of grid transmission lines, and because grid extension schemes often have very expensive equipment and staff costs. In contrast, micro-hydro schemes can be designed and built by local staff andsmaller organizations following less strict regulations and using 'off-the-shelf' components or locally made machinery.


Planning and Installing Micro-Hydro Systems

Planning and Installing Micro-Hydro Systems

Author: Chris Elliott

Publisher: Routledge

Published: 2014-04-16

Total Pages: 408

ISBN-13: 1317813820

DOWNLOAD EBOOK

An essential addition to the Earthscan Planning & Installing series, Planning and Installing Micro-Hydro Systems provides vital diagrams, pictures and tables detailing the planning and installing of a micro-hydro system, including information on the maintenance and economics once an installation is running. The book covers subjects such as measuring head and flow, ecological impacts, scheme layouts, practical advice, calculations and turbine choice. Archimedes screws are also covered in detail, as well as the main conventional choices relevant to small sites. Micro-hydro refers to hydropower systems with a power rating of 100kW or less. A 100kW system will produce 100 standard units of electricity in one hour. These systems have been popular in some sparsely populated or mountainous countries for a number of years, but now new technology, less stringent regulation of grid connected generators and standardised turbine designs are encouraging more widespread interest in micro-hydro in the developed world. The renewable energy sector is growing at a remarkable rate, and whilst much attention has so far focused on solar and wind technologies, Europe and elsewhere have great potential for generating power from small scale hydroelectric installations. This book is aimed at site owners, designers and consultants who are looking to develop schemes in the micro-hydro scale – 5 to 100kW – although the concepts are applicable to smaller and larger schemes.


Designing and Building Mini and Micro Hydropower Schemes

Designing and Building Mini and Micro Hydropower Schemes

Author: Luis Rodríguez

Publisher: Practical Action Publishing

Published: 2011

Total Pages: 0

ISBN-13: 9781853396465

DOWNLOAD EBOOK

This practical manual is a major new addition to the resources available for micro-hydro power project and programme managers worldwide and represents excellent value for such a detailed technical reference handbook.


Energy Resources and Systems

Energy Resources and Systems

Author: Tushar K. Ghosh

Publisher: Springer Science & Business Media

Published: 2011-06-27

Total Pages: 736

ISBN-13: 9400714025

DOWNLOAD EBOOK

This second volume of Energy Resources and Systems is focused on renewable energy resources. Renewable energy mainly comes from wind, solar, hydropower, geothermal, ocean, bioenergy, ethanol and hydrogen. Each of these energy resources is important and growing. For example, high-head hydroelectric energy is a well established energy resource and already contributes about 20% of the world’s electricity. Some countries have significant high-head resources and produce the bulk of their electrical power by this method. However, the bulk of the world’s high-head hydroelectric resources have not been exploited, particularly by the underdeveloped countries. Low-head hydroelectric is unexploited and has the potential to be a growth area. Wind energy is the fastest growing of the renewable energy resources for the electricity generation. Solar energy is a popular renewable energy resource. Geothermal energy is viable near volcanic areas. Bioenergy and ethanol have grown in recent years primarily due to changes in public policy meant to encourage its usage. Energy policies stimulated the growth of ethanol, for example, with the unintended side effect of rise in food prices. Hydrogen has been pushed as a transportation fuel. The authors want to provide a comprehensive series of texts on the interlinking of the nature of energy resources, the systems that utilize them, the environmental effects, the socioeconomic impact, the political aspects and governing policies. Volume 1 on Fundamentals and Non Renewable Resources was published in 2009. It blends fundamental concepts with an understanding of the non-renewable resources that dominate today’s society. The authors are now working on Volume 3, on nuclear advanced energy resources and nuclear batteries, consists of fusion, space power systems, nuclear energy conversion, nuclear batteries and advanced power, fuel cells and energy storage. Volume 4 will cover environmental effects, remediation and policy. Solutions to providing long term, stable and economical energy is a complex problem, which links social, economical, technical and environmental issues. It is the goal of the four volume Energy Resources and Systems series to tell the whole story and provide the background required by students of energy to understand the complex nature of the problem and the importance of linking social, economical, technical and environmental issues.


Motors as Generators for Micro Hydro Power

Motors as Generators for Micro Hydro Power

Author: Nigel Smith

Publisher:

Published: 2008

Total Pages: 116

ISBN-13:

DOWNLOAD EBOOK

This is a guide to the use of induction motors for electricity generation in remote locations. It is written as a practical handbook for engineers and technicians involved in designing and installing small water-power schemes for isolated houses and communities. This revised edition brings in new concepts developed and tested to expand the power range of application of motors as generators, to make this technology safer and more reliable, while keeping costs low and making it accessible to developing countries. It also contains a new chapter on mains-connecting micro-hydro generators. This edition also draws on the practical experience of manufacturers and installers of induction generator units working in village locations in a large number of countries, among them Sri Lanka, Nepal, Peru, Kenya and others.