The Mechanical Properties of Copper-beryllium Alloy Strip
Author: American Society for Testing and Materials
Publisher: ASTM International
Published: 1964
Total Pages: 124
ISBN-13:
DOWNLOAD EBOOKRead and Download eBook Full
Author: American Society for Testing and Materials
Publisher: ASTM International
Published: 1964
Total Pages: 124
ISBN-13:
DOWNLOAD EBOOKAuthor: Committee B-5 Staff
Publisher:
Published: 1964-01-01
Total Pages:
ISBN-13: 9780803161542
DOWNLOAD EBOOKAuthor: American Society for Testing and Materials. Committee B-5 on Copper and Copper Alloys
Publisher:
Published: 1964
Total Pages: 114
ISBN-13:
DOWNLOAD EBOOKAuthor: George Rice Gohn
Publisher:
Published: 1964
Total Pages: 0
ISBN-13:
DOWNLOAD EBOOKAuthor: American Society for Testing and Materials
Publisher:
Published: 1964
Total Pages: 0
ISBN-13:
DOWNLOAD EBOOKAuthor: G. R. Gohn
Publisher:
Published: 1964
Total Pages: 114
ISBN-13:
DOWNLOAD EBOOKThe influence of variations in beryllium content on the mechanical properties of copper-beryllium alloy strip is discussed. Four tempers of each of five alloys varying in beryllium content from 1.60 to 2.05 per cent were investigated, both in the solution heat-treated and strain-hardened conditions and after precipitation heat treatment. The mechanical properties evaluated include tensile strength, proportional limit, 0.01 and 0.2 per cent offset yield strengths, modulus of elasticity, elongation, fatigue strength in reversed bending at cycle lives ranging from 105 to 168, Rockwell and Rockwell superficial hardness. The effect of surface treatments on fatigue life, including furnace atmospheres and shot peening, is shown. Hardness response curves are given for the five alloys for various periods of time ranging from 1/2 to 5 hr at temmperatures of 575 to 700 F in increments of 25 F. From these studies the correlation between Rockwell B and Rockwell 30T hardness values, and Rockwell C and Rockwell 30N hardness values for each of the alloys was established. Data are also presented showing the resistance of the two commercial copper-beryllium alloys (No. 25 and No. 165) to stress corrosion cracking.
Author: British Standards Institute Staff
Publisher:
Published: 2009-11-30
Total Pages: 10
ISBN-13: 9780580628436
DOWNLOAD EBOOKAir transport engineering, Strips, Foil, Copper alloys, Beryllium-containing alloys, Solution heat treatment, Precipitation hardening, Chemical composition, Dimensional tolerances, Heat treatment, Tensile strength, Mechanical properties of materials
Author: George Rice Gohn
Publisher:
Published: 1964
Total Pages: 136
ISBN-13:
DOWNLOAD EBOOKAuthor: British Standards Institute Staff
Publisher:
Published: 2009-11-30
Total Pages: 10
ISBN-13: 9780580628467
DOWNLOAD EBOOKAir transport engineering, Copper alloys, Copper-containing alloys, Beryllium-containing alloys, Strips, Foil, Solution heat treatment, Cold rolling, Precipitation hardening, Chemical composition, Heat treatment, Mechanical properties of materials
Author: Copper Development Association
Publisher:
Published: 1958
Total Pages: 102
ISBN-13:
DOWNLOAD EBOOK