An Introduction to Magnesium Alloys
An Introduction to Magnesium Alloys

Author: John B. Hallowell

Publisher:

Published: 1964

Total Pages: 28

ISBN-13:

DOWNLOAD EBOOK

This report describes the characteristics and properties of existing commercial magnesium alloys and compares these relative to each other. Although this report is not intended to serve as a source of design data for magnesium alloys, it was written to provide a simple, up-to-date background of information for the technologist who is faced with the problem of materials selection and who is unfamiliar with the advantages and discaadvantages of magnesium alloys. The eight major alloying elements which are used to control the properties of magnesium are listed along with selected data illustrating the binary phase relationships which exist, between the hexagonal, close-packed structure of magnesium and each of these metals. The nomenclature system for commercial magnesium alloys is explained and compositions and available forms of the alloys are given. Property comparisons of both cast and wrought alloys are presented. There is a section in the report dealing with the joining, forming, and machining of magnesium, and a section devoted to a discussion of a number of finishing systems which have been developed for magnesium alloys. (Author).

Oxidation of Nickel- and Cobalt-base Superalloys
Oxidation of Nickel- and Cobalt-base Superalloys

Author: Carl H. Lund

Publisher:

Published: 1965

Total Pages: 38

ISBN-13:

DOWNLOAD EBOOK

This report presents information dealing with the oxidation of nickel- and cobalt-base superalloys. All of the superalloys will oxidize at high temperatures when oxygen is present in the enveloping atmosphere. The rate of oxidation depends upon alloy composition, temperature, oxygen concentration, oxides formed, diffusion rates of the metals in both base metal and oxide, diffusion rate of oxygen in the oxide, solubility of oxygen in the matrix, and a host of other variables. The effects of oxidation can be beneficial or they can be harmful. The first section of this report deals with the fundamentals of the oxidation of Ni-Cr and Co-Cr alloys. Subsequent sections discuss general surface oxidation, intergranular oxidation, other subsurface oxidation, and the effect of stress on the rate of oxidation. Numerous specific alloys are mentioned in the report; as an aid to the reader, the appendix contains an alloy index of the alloys mentioned in the report along with the compositions of the alloys, and the pages on which mention of the alloys is made.

Premium-quality Aluminum Castings
Premium-quality Aluminum Castings

Author: K. R. Grube

Publisher:

Published: 1965

Total Pages: 52

ISBN-13:

DOWNLOAD EBOOK

Premium-quality castings are those which are guaranteed to show a specified high level of mechanical properties. The properties currently being achieved represent significant improvements over those which can be achieved in conventional aluminum-alloy castings and approach the properties currently obtainable in wrought aluminum alloys. These property advances are largely the result of improved casting technique and design. These castings are gradually finding acceptance and usage in aerospace applications, thanks to integrated efforts between the casting producers and their customers. (Author).

Department of Defense Refractory Metals Sheet Rolling Program
Department of Defense Refractory Metals Sheet Rolling Program

Author: D. J. Maykuth

Publisher:

Published: 1965

Total Pages: 48

ISBN-13:

DOWNLOAD EBOOK

This report is the third of a series which will periodically summarize the status of the various contracts involved in the Department of Defense Refractory Metals Sheet Rolling Program. Under this program, selected candidate materials are being carried through one or more of the following consecutive phases: Phase I, development of a sheet-production practice; Phase II, establishment of minimum design data; and Phase III, evaluation of sheetfabrication characteristics. To the present time, 13 contracts have been funded or planned in support of the Phase I, II, and III activities. This report summarizes the status of each of these individual contracts as of November 1, 1964. The first section describes the overall program of the Department of Defense Refractory Metals Sheet Rolling Program. Following, in the order of their discussions, are sections dealing with fabricable molybdenum alloys, unalloyed tungsten, columbium alloys, and tantalum alloys. (Author).