Read and Download eBook Full
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2017-01-17
Total Pages: 18
ISBN-13:
DOWNLOAD EBOOKThis standard specifies the composition, working environment, technical requirements, test methods, inspection rules and markings, packaging, transportation and storage of axle counters.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2016-07-24
Total Pages: 35
ISBN-13:
DOWNLOAD EBOOKThis Standard specifies type size limit deviation and tolerance, technical requirements, test methods, inspection rules, marks, packaging, transport and quality certificate of carbon cast steel wheel for railway freight car. This Standard is applicable to carbon cast steel wheel for railway freight car of which running speed is less than or equals to 120 km/h.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2017-07-20
Total Pages: 74
ISBN-13:
DOWNLOAD EBOOKThis standard specifies the general functional technical requirements of the digital mobile communication terminal (hereinafter referred to as the mobile terminal) in the single-module single standby, multi-module single standby, single-module multi-standby state, etc., AND specifies the corresponding test methods.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2015-04-06
Total Pages: 22
ISBN-13:
DOWNLOAD EBOOKThis Standard specifies the PLATES.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2020-03-31
Total Pages: 16
ISBN-13:
DOWNLOAD EBOOKThis Standard specifies the classification, model, dimension, technical requirements, test methods, inspection rules, marking and transportation of the freight container spreader. This Standard is applicable to fixed and telescopic single freight container spreaders. Other types of freight container spreaders can be used as a reference.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2016-12-07
Total Pages: 24
ISBN-13:
DOWNLOAD EBOOKThis Part describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location of systems/components on/in the vehicle.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2017-02-27
Total Pages: 26
ISBN-13:
DOWNLOAD EBOOKThis Standard specifies the type, basic parameters, dimensions and tolerances, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of YBS series flameproof three phases asynchronous motor for conveyer.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2018-01-01
Total Pages: 141
ISBN-13:
DOWNLOAD EBOOKThis document provides the comprehensive list of Chinese Industry Standards - Category: TB; TB/T; TBT.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2021-11-05
Total Pages: 13
ISBN-13:
DOWNLOAD EBOOKThis Standard specifies the terms, symbols, basic profile and size of taper threads and cylindrical pipe threads for gas cylinders. This Standard applies to the taper thread for connection of the opening of the gas cylinder to the cylinder valve, and the cylindrical pipe thread for connection of the valve protection cap to the neck ring. The taper thread for connection of fusible plug of the gas cylinder with safety device to plug seat can also refer to this Standard.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2018-10-26
Total Pages: 17
ISBN-13:
DOWNLOAD EBOOKThis part of JB/T 10696 specifies the test conditions, test procedures, test results and calculations for termite tests. This part specifies three methods for testing termites: the knockdown method, the experimental population method, the nest method. This part applies to the determination of the resistance to termite corrosion of electric wire and cable products and their sheath materials (mainly plastic or rubber).
