Directed Self-assembly of Block Co-polymers for Nano-manufacturing

Directed Self-assembly of Block Co-polymers for Nano-manufacturing

Author: Roel Gronheid

Publisher: Woodhead Publishing

Published: 2015-07-17

Total Pages: 328

ISBN-13: 0081002610

DOWNLOAD EBOOK

The directed self-assembly (DSA) method of patterning for microelectronics uses polymer phase-separation to generate features of less than 20nm, with the positions of self-assembling materials externally guided into the desired pattern. Directed self-assembly of Block Co-polymers for Nano-manufacturing reviews the design, production, applications and future developments needed to facilitate the widescale adoption of this promising technology. Beginning with a solid overview of the physics and chemistry of block copolymer (BCP) materials, Part 1 covers the synthesis of new materials and new processing methods for DSA. Part 2 then goes on to outline the key modelling and characterization principles of DSA, reviewing templates and patterning using topographical and chemically modified surfaces, line edge roughness and dimensional control, x-ray scattering for characterization, and nanoscale driven assembly. Finally, Part 3 discusses application areas and related issues for DSA in nano-manufacturing, including for basic logic circuit design, the inverse DSA problem, design decomposition and the modelling and analysis of large scale, template self-assembly manufacturing techniques. Authoritative outlining of theoretical principles and modeling techniques to give a thorough introdution to the topic Discusses a broad range of practical applications for directed self-assembly in nano-manufacturing Highlights the importance of this technology to both the present and future of nano-manufacturing by exploring its potential use in a range of fields


Synthesis and Solution State Self-assembly of Linear-dendritic Block Copolymers

Synthesis and Solution State Self-assembly of Linear-dendritic Block Copolymers

Author: Kristoffer Keith Stokes

Publisher:

Published: 2007

Total Pages: 282

ISBN-13:

DOWNLOAD EBOOK

Linear-dendritic block copolymers consisting of a poly(styrene) linear block and poly(amidoamine) dendrimer block were synthesized and examined for their ability to self-assemble in both aqueous environments and organic/aqueous mixtures. These polymers were shown to assemble into vesicle structures under a variety of conditions. Furthermore, size measurements of the dendritic portion were taken by means of Langmuir-Blodgett isotherms, demonstrating both the steric area, as well as the electrostatic area occupied by the dendrimer in a monolayer. Further studies into the rapid synthesis of such systems were also undertaken, with a particular interest in use of the so-called "click" reaction to be used as a facile means toward block copolymer synthesis.


Synthesis, Self-assembly and Applications of Amorphous Polyferrocenylsilane Block Copolymers

Synthesis, Self-assembly and Applications of Amorphous Polyferrocenylsilane Block Copolymers

Author: David Allen Rider

Publisher:

Published: 2007

Total Pages: 598

ISBN-13: 9780494527382

DOWNLOAD EBOOK

A series of well-defined polystyrene-block-poly(ferrocenylethylmethylsilane) (PS-b-PFEMS) diblock copolymers was synthesized. Both PFEMS and PS- b-PFEMS were shown to be amorphous due to the atactic nature of the PFEMS. As a result, PS- b-PFEMS readily undergo solid-state self-assembly in the bulk producing a spectrum of ordered nanometer sized iron-rich morphologies. When cylinder-forming PS-b-PFEMSs were studied in thin films, well-ordered arrays of hexagonally packed iron-rich cylindrical microdomains oriented either parallel to or normal to the substrate were produced. The orientation was found to depend strongly on the film thickness and/or the conditions of annealing. The etching of these films using (i) reactive plasmas, and (ii) an oxidative chemical wet etch technique were investigated. Using (i), surface-patterned magnetic ceramics were produced as well as a nanotextured silver metal film. The latter was found to dramatically enhance the Raman spectroscopy of an adsorbed analyte molecule. Using (ii), nanoporous polystyrene films were generated by the quantitative elimination of PFEMS domains by exposure to a nucleophilic non-solvent under oxidizing conditions.Thin films of PS-b-PFEMS generated efficient iron nanoparticle catalysts for single-walled carbon nanotube (SWNT) growth via a chemical vapor deposition growth process. The kinetics of the formation of iron catalysts from PS- b-PFEMS and PFEMS were compared. Despite the lower iron content for PS-b -PFEMS films, more active iron sites were produced. Additionally, the tube diameter and density were tunable by adjusting the chain lengths of polyferrocenylsilane- block-polysiloxanes in thin films. Lastly, high-throughput field-effect SWNT transistors have been fabricated with more than 160 individually addressable devices on a chip.The influence of strong 3D confinement on the self-assembly of PS-b-PFEMS was studied. Both silica colloidal crystals and silica inverse colloidal crystals were used for directing the self-assembly. Unusual morphologies, such as concentric shells and branched lamellae, resulted from the interaction of the lamellar-forming PS-b-PFEMS with the high surface area templates. In addition, the control of the 3D confined morphology of cylinder-forming PS-b-PFEMS was demonstrated through mediation of the interfacial interactions within the colloidal crystal.For solution state self-assembly, PS-b -PFEMSs and polystyrene-block-poly(ferrocenylmethylphenylsilanes) (PS-b-PFEMSs) were stoichiometrically oxidized in solution. Due to a redox-induced polarity change for the PFEMS and PFMPS blocks, self-assembly into well-defined spherical micelles occurred. The micelles, composed of a core of partially oxidized PFS segments and a corona of PS, disassembled when treated with a reducing agent and regenerated unassociated free chains.Lastly, the photochemical treatment of metal-containing ferrocenophane monomers with low energy Pyrex-filtered light from a mercury lamp (lambda > 310 nm) or bright sunlight in the presence of an anionic initiator led to living polymerizations in which the conversion and molecular weight of the resulting polymer was controlled by irradiation time. The polymerization proceeded via attack of the initiator or propagating anion on the iron atom of the photoexcited monomer. The formation of functional block copolymer architectures was possible when the light is alternately switched on and off in between the sequential addition of different monomers.


Synthesis and Applications of Ring Opening Metathesis Polymerization Based Functional Block Copolymers

Synthesis and Applications of Ring Opening Metathesis Polymerization Based Functional Block Copolymers

Author: Sanchita Biswas

Publisher:

Published: 2010

Total Pages: 172

ISBN-13:

DOWNLOAD EBOOK

Ring opening metathesis polymerization (ROMP) is established as one of the efficient controlled living polymerization methods which have various applications in polymer science and technology fields. The research presented in this dissertation addresses several applications of multifunctional well-defined norbornene-based block copolymers synthesized by ROMP using ruthenium-based Grubbs catalysts. These novel block copolymers were applied to stabilize maghemite nanoparticles, creating the superparamagnetic polymeric nanocomposites. The J-aggregation properties of the porphyrin dyes were improved via self-assembly with a customized norbornene polymer. Novel multimodal copolymer probes were synthesized for two-photon fluorescence integrin-targeted bioimaging. In Chapter 1 a brief overview of ROMP along with ruthenium metal catalysts and selected applications of the polymers related to this research is presented. Superparamagnetic maghemite nanoparticles are important in biotechnology fields, such as enhanced magnetic resonance imaging (MRI), magnetically controlled drug delivery, and biomimetics. However, cluster formation and eventual loss of nano-dimensions is a major obstacle for these materials. Chapter 2 presents a solution to this problem through nanoparticles stabiulized in a polymer matrix. The synthesis and chracterization of novel diblock copolymers, consisting of epoxy pendant anchoring groups to chelate maghemite nanoparticles and steric stabilizing groups, as well as generation of nanocomposites and their characterization, including surface morphologies and magnetic properties, is discussed in Chapter 2. In Chapter 3, further improvement of the nanocomposites by ligand modification and the synthesis of pyrazole-templated diblock copolymers and their impact to stabilize the maghemite nanocomposite are presented. Additionally, the organic soluble magnetic nanocomposites with high magnetizations were encapsulated in an amphiphilic copolymer and dispersed in water to assess their water stability by TEM. To gain a preliminary measure of biocopatibility of the micelle-encapsulated polymeric magnetic nanocomposites, cell-viability was determined. In Chapter 4, aggregation behaviors of two porphyrin-based dyes were investigated. A new amphiphilic homopolymer containing secondary amine moieties was synthesized and characterized. In low pH, the polymer became water soluble and initiated the stable J-aggregation of the porphyrin. Spectroscopic data supported the aggregation behavior. Two photon fluorescence microscopy (2PFM) has become a powerful technique in bioimaging for non-invasive imaging and potential diagnosis and treatment of a number of diseases via excitation in the near-infrared (NIR) region. The fluorescence emission upon two-photon absorption (2PA) is quadratically dependent with the intensity of excitation light (compared to the linear dependence in the case of one-photon absoprtion), offering several advantages for biological applications over the conventional one-photon absorption (1PA) due to the high 3D spatial resolution that is confined near the focal point along with less photodamage and interference from the biological tissues at longer wavelength (~700-900 nm). Hence, efficient 2PA absorbing fluorophores conjugated with specific targeting moieties provides an even better bioimaging probe to diagnose desired cellular processes or areas of interest The [alpha subscript v beta subscript 3] integrin adhesive protein plays a significant role in regulating angiogenesis and is over-expressed in uncontrolled neovascularization during tumor growth, invasion, and metastasis. Cyclic-RGD peptides are well-known antagonists of [alpha subscript v beta subscript 3] integrin which suppress the angiogenesis process, thus preventing tumor growth. In Chapter 5 the synthesis, photophysical studies and bioimaging is reported for a versatile norbornene-based block copolymer multifunctional scaffold containing biocompatible (PEG), two-photon fluorescent (fluorenyl), and targeting (cyclic RGD peptide) moieties. This water-soluble polymeric multi scaffold probe with negligible cytotoxicity exhibited much stronger fluorescence and high localization in U87MG cells (that overexpress integrin) compared to control MCF7 cells. The norbornene-based polymers and copolymers have quite remarkable versatility for the creation of advanced functional magnetic, photonic, and biophotonic materials.


Post-Polymerization Modification of Block Copolymers for Functionalization-Induced Self-Assembly

Post-Polymerization Modification of Block Copolymers for Functionalization-Induced Self-Assembly

Author: David H. Howe

Publisher:

Published: 2020

Total Pages: 127

ISBN-13:

DOWNLOAD EBOOK

This thesis is focused on expanding the utility of post-polymerization modification (PPM) and establishing it as a viable route for the synthesis of self-assembled polymeric nanoparticles through three primary research projects. The first project demonstrates Pd-catalyzed, Suzuki-Miyaura cross-coupling (SMC) as a new, versatile method for PPM on well-defined polymers derived from RAFT polymerization. The second project aims to employ SMC as the driving force behind a novel strategy for inducing dynamic self-assembly of block copolymers into nanoparticles through a technique termed "functionalization induced self-assembly" (FISA). The final project of this thesis improves upon the versatility and ease-of-use of FISA by extending it to the base-catalyzed thiol-epoxide "click" reaction as the primary PPM driving in situ self-assembly, thus achieving convenient polymer nanoparticle synthesis under ambient conditions and atmosphere. Keywords: click reaction, nanoparticle, polymer, RAFT, self-assembly, Suzuki