Surface Preparation of Stainless Steel Prior to Painting
Surface Preparation of Stainless Steel Prior to Painting

Author: Dario A. Emeric

Publisher:

Published: 1992

Total Pages: 17

ISBN-13:

DOWNLOAD EBOOK

Military specification MIL-T-704, Treatment and paint of materiel, requires the passivation of corrosion-resisting steel surfaces before painting. It also states surfaces to be painted shall be treated with wash primer conforming to DOD-P-15328, Primer (wash) pretreatment (Formula No. 117 for metals), metric, or MIL-C-8514, Coating compound, metal pretreatment, resin- acid. Federal, state and city environmental and/or health regulations may prohibit the use of hexavalent chromium-one of the components of the passivating formulation used for the treatment of corrosion-resisting steels. Many companies are not passivating the corrosion-resisting steels before the application of wash primer. Based on the above, we started a laboratory investigation to determine if the elimination of the passivating procedure will have an adverse effect on the camouflage paint system. From the information obtained, it is recommended that consideration be given to the elimination of the passivation requirement for stainless steel. It is also recommended that more extensive work be conducted to verify these findings.

Essentials of Coating, Painting, and Lining for the Oil, Gas and Petrochemical Industries
Essentials of Coating, Painting, and Lining for the Oil, Gas and Petrochemical Industries

Author: Alireza Bahadori

Publisher: Gulf Professional Publishing

Published: 2015-01-06

Total Pages: 815

ISBN-13: 0128016655

DOWNLOAD EBOOK

With the oil and gas industry facing new challenges—deeper offshore installations, more unconventional oil and gas transporting through pipelines, and refinery equipment processing these opportunity feedstocks--new corrosion challenges are appearing, and the oil and gas industry’s infrastructure is only as good as the quality of protection provided and maintained. Essentials of Coating, Painting, and Linings for the Oil, Gas, and Petrochemical Industries is the first guide of its kind to directly deliver the necessary information to prevent and control corrosion for the components on the offshore rig, pipelines underground and petrochemical equipment. Written as a companion to Cathodic Corrosion Protection Systems, this must-have training tool supplies the oil and gas engineer, inspector and manager with the full picture of corrosion prevention methods specifically catered for oil and gas services. Packed with real world case studies, critical qualifications, inspection criteria, suggested procedure tests, and application methods, Essentials of Coating, Painting, and Linings for the Oil, Gas and Petrochemical Industries is a required straightforward reference for any oil and gas engineer and manager. Understand how to select, prime and apply the right coating system for various oil and gas equipment and pipelines – both upstream and downstream Train personnel with listed requirements, evaluation material and preparation guides, including important environmental compliance considerations Improve the quality of your equipment, refinery and pipeline with information on repair and rejection principles

Principles of Metal Surface Treatment and Protection
Principles of Metal Surface Treatment and Protection

Author: D. R. Gabe

Publisher: Elsevier

Published: 2014-07-22

Total Pages: 232

ISBN-13: 1483188396

DOWNLOAD EBOOK

Principles of Metal Surface Treatment and Protection deals with the principles of metal surface treatment and protection. Topics covered range from electrodeposition and hot dip coating to diffusion and non-metallic coatings, as well as oxide and conversion coatings. The theory of corrosion protection is also discussed. Comprised of eight chapters, this volume begins with an overview of the corrosion of metals and the scope of protection against corrosion, followed by a detailed treatment of electrodeposition. The discussion then turns to the principles of hot dipping as a coating method; the formation of a diffusion coating; and the role of a non-metallic coating in corrosion protection. Subsequent chapters focus on the protection of oxide films against corrosion by means of anodizing, phosphatizing, and the use of tin free steel; testing and selection of a particular coating for corrosion resistance applications; and the theory of corrosion protection. This book is intended for metal-finishing scientists and students of metallurgy and metal finishing.

Proceedings of AICCE'19
Proceedings of AICCE'19

Author: Fadzli Mohamed Nazri

Publisher: Springer Nature

Published: 2019-11-28

Total Pages: 1635

ISBN-13: 3030328163

DOWNLOAD EBOOK

This book gathers the latest research, innovations, and applications in the field of civil engineering, as presented by leading national and international academics, researchers, engineers, and postgraduate students at the AWAM International Conference on Civil Engineering 2019 (AICCE’19), held in Penang, Malaysia on August 21-22, 2019. The book covers highly diverse topics in the main fields of civil engineering, including structural and earthquake engineering, environmental engineering, geotechnical engineering, highway and transportation engineering, water resources engineering, and geomatic and construction management. In line with the conference theme, “Transforming the Nation for a Sustainable Tomorrow”, which relates to the United Nations’ 17 Global Goals for Sustainable Development, it highlights important elements in the planning and development stages to establish design standards beneficial to the environment and its surroundings. The contributions introduce numerous exciting ideas that spur novel research directions and foster multidisciplinary collaborations between various specialists in the field of civil engineering.