Surface Phenomena and Fine Particles in Water-Based Coatings and Printing Technology
Surface Phenomena and Fine Particles in Water-Based Coatings and Printing Technology

Author: F.J. Micale

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 330

ISBN-13: 1461538122

DOWNLOAD EBOOK

'IHE CURRENT STATE OF 'IHE AID' of several aspects of water-based coatings and printing processes is presented in this voltnne. It documents the proceedings of the Intemationl Syrrposium on Surface RJ. enornena and Fine Particles in Water-Based Coatings and Printing Teclmology sponsored by the Fine Particle Society (FPS). '!his meeting was held in Boston, Massachusetts, August 21-25, 1989. '!he syrrp:>sium upon which this voltnne is based was organized in six sessions errphasizing various basic and applied areas of research on water-based technology. Major topics discussed involve surface phenomena in coatings, printing defects and their remedies, surface tension effects in water-based coatings and printing inks, surface energies of polymer substrates, wettability, aqueous polymeric film coating of pharmaceuticals, flexographic and gravure printing processes, characterization of coating materials, pigment dispersion, wax emulsions for surface modifications, and the role of polymer in particle/surface deposition. '!his edition includes the twenty four selected papers presented in the syrrp:>sium. '!hese papers are divided in three broad categories: (1) Water-Based Inks and Coatings, (2) Emulsions and Adhesion in Coatings, and (3) Characterization of Coating and Printing Materials. Several types of coating and printing on different substrates using water-based fonnulations with special reference to surface phenomena and particle technology are described in these sections. This proceedings vo1tnne includes discussions of various processes occuring at llIOlecular, microscopic, and macroscopic levels in water-based coatings and printing processes.

Surface Phenomena and Additives in Water-Based Coatings and Printing Technology
Surface Phenomena and Additives in Water-Based Coatings and Printing Technology

Author: Mahendra K. Sharma

Publisher: Springer Science & Business Media

Published: 2013-11-11

Total Pages: 308

ISBN-13: 1489923616

DOWNLOAD EBOOK

Water-based technology has undergone revolutionary changes during the past two decades. Interest in the properties and uses of water-based coatings, paints and inks has continued to grow since the establishment of the Clean Air Act of 1970. The present book is devoted to recent developments and trends in water-based coating and ink technology. This volume is divided in three broad catagories: (1) Additives and Water-based Coating/Ink Systems, (2) Surface Modifications and Wettability, and (3) Ink/Coating Formulations and Their characterization. The role of various additives to improve the performance and properties of water-based coatings with special reference to surface phenomena such as wettability, adhesion, surface energies, dispersion stability, particle size and size distribution are presented in these sections. This volume documents the proceedings of the International symposium on Surface Phenomena and Additives in Water-Based Coatings and Printing Technology sponsored by the 21st Annual Meeting of the Fine Particle Society (FPS). This meeting was held in San Diego, california, AUgust 21-25, 1990. The symposium upon which this volume is based was organized in four sessions emphasizing several basic and applied aspects of water-based coatings and printing technology. Major topics discussed include advances in water-based technology, water-based flexo and gravure inks, hydrophobically-modified cellulosic thickeners, organosilicones, uv curable silicone release coatings, surface characterization of Ti02 pigments, polymer substrates, flexographic plates and coating films, pigment wetting and dispersing agents, hydrotrope effect in emulsion polymers, film thickness control, particle size measurements, rheological properties, and statistically designed mixtures for ink formulations.

Surface Phenomena and Latexes in Waterborne Coatings and Printing Technology
Surface Phenomena and Latexes in Waterborne Coatings and Printing Technology

Author: Mahendra K. Sharma

Publisher: Springer Science & Business Media

Published: 2013-03-09

Total Pages: 229

ISBN-13: 1475723954

DOWNLOAD EBOOK

THE CURRENT STATE OF THE ART of waterborne polymers, paints, coatings, inks and printing processes is presented in this volume. This is the third volume in the series on waterborne coating and printing technology. It documents several invited papers and the proceedings of the International Symposium on Surface Phenomena and Latexes in Waterborne Coatings and printing Technology sponsored by the Fine Particle Society (FPS). The FPS meeting was held in Las Vegas, Nevada, July 13-17, 1992. The volume deals with various basic and applied aspects of research on waterborne coating!printing technology. Major topics discussed involve waterborne polymers and polymer blends, pigment grinding, millbases, paint formulation, and characterization of coating films. This edition includes sixteen selected papers related to recent developments in waterborne technology. These papers are divided in three broad categories: (1) Waterborne Polymers and pigment Dispersions, (2) Latex Film, Wetting Phenomena and Printing Gloss, (3) Surfactants and Polymers in Aqueous Coating!printing Systems. This volume includes discussions of various waterborne polymers in coating!printing systems. The editors hope that this volume will serve its intended objective of reflecting the current understanding of formulation and process problems related to waterborne coatings, paints and inks. In addition, it will be a valuable reference source for both novices as well as experts in the field of waterborne technology. It will also help the readers to understand underlying surface phenomena and will enhance the reader's potential for solving critical formulation, evaluation and process problems.

Surface Analysis of Paper
Surface Analysis of Paper

Author: Terrance E. Conners

Publisher: CRC Press

Published: 2020-04-15

Total Pages: 430

ISBN-13: 1000696553

DOWNLOAD EBOOK

First published in 1995, Surface Analysis of Paper examines surface analysis techniques from a paper industry perspective and places heavy emphasis on applications. Modern techniques, including ion mass spectrometry, infrared spectroscopy, and optical profilometry are reviewed in a straightforward manner. This new book provides details on widely used methods and instruments, and discusses how they can be used to attain, for example, contour maps of the microscopic constituents on paper surfaces and accurate analyses of the physical properties of paper. Organized into three sections, Surface Analysis of Paper provides thorough coverage of the physical characteristics of paper, and a clear picture of new and emerging analytical methods. Carefully chosen background material on fundamental concepts is included wherever such material assists in understanding the uses of analysis methods. Each chapter contains: An introduction A description of the technique A discussion of the type of information that can be obtained with the particular technique Practical examples to demonstrate the advantages of the technique

First International Congress on Adhesion Science And Technology---invited Papers
First International Congress on Adhesion Science And Technology---invited Papers

Author: W. J. Van Ooij

Publisher: VSP

Published: 1998-12

Total Pages: 970

ISBN-13: 9789067642910

DOWNLOAD EBOOK

This Festschrift documents the Proceedings of the First International Congress on Adhesion Science and Technology, held in honor of Dr. Kash Mittal on the occasion of his 50 birthday, in Amsterdam, The Netherlands, October 16-20, 1995. It contains the full accounts of the plenary and invited lectures, which are divided into the following seven parts: Part 1: Fundamental aspects of adhesion and general topics; Part 2: Contact angle, wettability and surface energetics; Part 3: Surface modification: Relevance to adhesion; Part 4: Adhesives and adhesive joints; Part 5: Adhesion aspects of polymeric coatings, and polymer-polymer interphase; Part 6: Metal-polymer and metal-ceramic adhesion; and Part 7: General papers. The topics covered include many different aspects of adhesion science and technology, and both fundamental and applied issues are addressed. The final section of this volume gives a listing of titles, authors and affiliations of the other 185 papers which were included in the technical program of the conference.

First International Congress on Adhesion Science and Technology---invited papers
First International Congress on Adhesion Science and Technology---invited papers

Author: W.J. van Ooij

Publisher: CRC Press

Published: 2023-03-08

Total Pages: 966

ISBN-13: 146656279X

DOWNLOAD EBOOK

This Festschrift documents the Proceedings of the First International Congress on Adhesion Science and Technology, held in honor of Dr. Kash Mittal on the occasion of his 50 birthday, in Amsterdam, The Netherlands, October 16-20, 1995. It contains the full accounts of the plenary and invited lectures, which are divided into the following seven part

Flexible Carbon-based Electronics
Flexible Carbon-based Electronics

Author: Paolo Samorì

Publisher: John Wiley & Sons

Published: 2019-02-11

Total Pages: 334

ISBN-13: 3527341919

DOWNLOAD EBOOK

This third volume in the Advanced Nanocarbon Materials series covers the topic of flexible electronics both from a materials and an applications perspective. Comprehensive in its scope, the monograph examines organic, inorganic and composite materials with a section devoted to carbon-based materials with a special focus on the generation and properties of 2D materials. It also presents carbon modifications and derivatives, such as carbon nanotubes, graphene oxide and diamonds. In terms of the topical applications covered these include, but are not limited to, flexible displays, organic electronics, transistors, integrated circuits, semiconductors and solar cells. These offer perspectives for today?s energy and healthcare challenges, such as electrochemical energy storage and wearable devices. Finally, a section on fundamental properties and characterization approaches of flexible electronics rounds off the book. Each contribution points out the importance of the structure-function relationship for the target-oriented fabrication of electronic devices, enabling the design of complex components.

Non-Thermal Plasma Technology for Polymeric Materials
Non-Thermal Plasma Technology for Polymeric Materials

Author: Sabu Thomas

Publisher: Elsevier

Published: 2018-10-08

Total Pages: 496

ISBN-13: 0128131535

DOWNLOAD EBOOK

Non-Thermal Plasma Technology for Polymeric Materials: Applications in Composites, Nanostructured Materials and Biomedical Fields provides both an introduction and practical guide to plasma synthesis, modification and processing of polymers, their composites, nancomposites, blends, IPNs and gels. It examines the current state-of-the-art and new challenges in the field, including the use of plasma treatment to enhance adhesion, characterization techniques, and the environmental aspects of the process. Particular attention is paid to the effects on the final properties of composites and the characterization of fiber/polymer surface interactions. This book helps demystify the process of plasma polymerization, providing a thorough grounding in the fundamentals of plasma technology as they relate to polymers. It is ideal for materials scientists, polymer chemists, and engineers, acting as a guide to further research into new applications of this technology in the real world. - Enables materials scientists and engineers to deploy plasma technology for surface treatment, characterization and analysis of polymeric materials - Reviews the state-of-the-art in plasma technology for polymer synthesis and processing - Presents detailed coverage of the most advanced applications for plasma polymerization, particularly in medicine and biomedical engineering, areas such as implants, biosensors and tissue engineering

Interfacial Dynamics
Interfacial Dynamics

Author: Nikola Kallay

Publisher: CRC Press

Published: 2000-01-03

Total Pages: 780

ISBN-13: 9780824700065

DOWNLOAD EBOOK

An examination of the theoretical foundations of the kinetics and thermodynamics of solid-liquid interfaces, as well as state-of-the-art industrial applications, this book presents information on surface and colloidal chemical processes and evaluates vital analytical tools such as atomic force microscopy, surface force apparatus measurements, and photon correlation spectroscopy.

Inkjet Printing in Industry
Inkjet Printing in Industry

Author: Werner Zapka

Publisher: John Wiley & Sons

Published: 2022-08-22

Total Pages: 1718

ISBN-13: 3527347801

DOWNLOAD EBOOK

This handbook provides an indispensable overview of all essential aspects of industrial-scale inkjet printing. Inkjet printing, as a scalable deposition technique, has grown in popularity due to its being additive, digital, and contact-free. Given these advantages, the technology can now be used in stable and mature industrial-scale applications. As the mechanisms for inkjet printing have improved, so too have the versatility and applicability of this machinery within industry. The handbook's coverage includes inks, printhead technology, substrates, metrology, software, as well as machine integration and pre- and post-processing approaches. This information is complemented by an overview of printing strategies and application development and covers technological advances in packaging, security printing, printed electronics, robotics, 3D printing, and bioprinting. Important topics like standardisation, regulatory requirements, ecological aspects, and patents. Readers will find: The most comprehensive work on the topic with over 75 chapters and more than 1,500 pages relating to inkjet printing technology The inkjet-printing expertise of corporate development engineers and academic researchers in one manual A hands-on approach utilizing case studies, success stories, and practical hints that allow the reader direct, first-hand experience with the power of inkjet printing technology. The ideal resource for material scientists, engineering scientists in industry, electronic engineers, and surface and solid-state chemists,Inkjet Printing in Industry is an all-in-one tool for modern professionals and researchers alike.