Surface Modification and Alloying

Surface Modification and Alloying

Author: J.M. Poate

Publisher: Springer Science & Business Media

Published: 2013-11-21

Total Pages: 413

ISBN-13: 146133733X

DOWNLOAD EBOOK

This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.


Materials Surface Processing by Directed Energy Techniques

Materials Surface Processing by Directed Energy Techniques

Author: Yves Pauleau

Publisher: Elsevier

Published: 2006-04-25

Total Pages: 745

ISBN-13: 0080458963

DOWNLOAD EBOOK

The current status of the science and technology related to coatings, thin films and surface modifications produced by directed energy techniques is assessed in Materials Surface Processing by Directed Energy Techniques. The subject matter is divided into 20 chapters - each presented at a tutorial level – rich with fundamental science and experimental results. New trends and new results are also evoked to give an overview of future developments and applications. - Provides a broad overview on modern coating and thin film deposition techniques, and their applications - Presents and discusses various problems of physics and chemistry involved in the production, characterization and applications of coatings and thin films - Each chapter includes experimental results illustrating various models, mechanisms or theories


Additive Manufacturing for the Aerospace Industry

Additive Manufacturing for the Aerospace Industry

Author: Francis H. Froes

Publisher: Elsevier

Published: 2019-02-15

Total Pages: 483

ISBN-13: 0128140631

DOWNLOAD EBOOK

Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. - Provides information on a broad range of materials and processes used in additive manufacturing - Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry - Covers a wide array of materials for use in the additive manufacturing of aerospace parts - Discusses current standards in the area of aerospace AM parts


Manufacturing Techniques for Materials

Manufacturing Techniques for Materials

Author: T.S. Srivatsan

Publisher: CRC Press

Published: 2018-04-09

Total Pages: 790

ISBN-13: 1351597191

DOWNLOAD EBOOK

Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.


Laser Surface Engineering

Laser Surface Engineering

Author: Jonathan R. Lawrence

Publisher: Elsevier

Published: 2014-10-02

Total Pages: 719

ISBN-13: 1782420797

DOWNLOAD EBOOK

Lasers can alter the surface composition and properties of materials in a highly controllable way, which makes them efficient and cost-effective tools for surface engineering. This book provides an overview of the different techniques, the laser-material interactions and the advantages and disadvantages for different applications. Part one looks at laser heat treatment, part two covers laser additive manufacturing such as laser-enhanced electroplating, and part three discusses laser micromachining, structuring and surface modification. Chemical and biological applications of laser surface engineering are explored in part four, including ways to improve the surface corrosion properties of metals. - Provides an overview of thermal surface treatments using lasers, including the treatment of steels, light metal alloys, polycrystalline silicon and technical ceramics - Addresses the development of new metallic materials, innovations in laser cladding and direct metal deposition, and the fabrication of tuneable micro- and nano-scale surface structures - Chapters also cover laser structuring, surface modification, and the chemical and biological applications of laser surface engineering


Plasma Surface Metallurgy

Plasma Surface Metallurgy

Author: Zhong Xu

Publisher: Springer

Published: 2017-09-21

Total Pages: 281

ISBN-13: 9811057249

DOWNLOAD EBOOK

This book provides a comprehensive introduction to and technical description of a unique patented surface-modification technology: plasma surface metallurgy with double-glow discharge plasma process, known as the Xu-Tec process. As such it promotes further attention and interest in scientific research and engineering development in this area, as well as industrial utilization and product commercialization. The Xu-Tec process has opened up a new material engineering field of “Plasma Surface Metallurgy”. This surface-modification process can transform many low-grade and low-cost industrial engineering materials into “gold” materials with a high value and high grade or special functions. This improved material can be widely used in industrial production to improve the surface performance and quality of mechanical parts and manufacturing products, and to conserve expensive alloying elements for the benefit of all mankind. “This book will be valuable to those in the general area of surface metallurgy. The substantial description of the Xu-Tec process is very important and should assist in expanding the use of this superior technique. The in-depth explanation of glow discharges and their use in general will also serve as a valuable reference in the field.” James E. Thompson, Prof. Fellow of the IEEE Dean of Engineering Emeritus University of Missouri, Columbia, Missouri, USA November, 2016 "A BREAKTHROUGH IN MAKING METAL TOUGHER". ---- SCIENCE & TECHNOLOGY Business Week, July 24, 1989 “NOVEL SURFACE ALLOYING PROCESS” --- THE LEADING EDGE TECHNOLOGY WORDWIDE Materials and Processing Report, Dec. 1987


Amorphous Metallic Alloys

Amorphous Metallic Alloys

Author: BURTON

Publisher: Elsevier

Published: 2013-10-22

Total Pages: 549

ISBN-13: 1483192431

DOWNLOAD EBOOK

Amorphous Metallic Alloys covers the preparation and properties of alloys produced by rapid quenching from the molten state. This book focuses on three technologically important classes of magnetic amorphous alloy—transition metal-metalloid (TM-M) alloys, rare earth-transition metal (RE-TM) alloys, and transition metal-zirconium or hafnium alloys (TM-Zr-Hf). The melt-quenched transition metal-metalloid and transition metal-zirconium type alloys are also emphasized. This text likewise explains in detail how amorphous atomic structure affects magnetic, mechanical, chemical, corrosion, and electrical characteristics. Other topics include glass forming ability in metallic materials, scattering theory of amorphous metals, dynamics of inhomogeneous plastic flow, and powder production processes. This publication is intended for students and researchers conducting work on amorphous metallic alloys.


Materials and Processes for Surface and Interface Engineering

Materials and Processes for Surface and Interface Engineering

Author: Y. Pauleau

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 652

ISBN-13: 9401100772

DOWNLOAD EBOOK

Materials and Processes for Surface and Interface Engineering, which has been written by experts in the fields of deposition technology and surface modification techniques, offers up to date tutorial papers on the latest advances in surface and interface engineering. The emphasis is on fundamental aspects, principles and applications of plasma and ion beam processing technology. A handbook for the engineer and scientist as well as an introduction for students in several branches of materials science and surface engineering.