Lateral Load Resistance of Diaphragms in Prestressed Concrete Girder Bridges

Lateral Load Resistance of Diaphragms in Prestressed Concrete Girder Bridges

Author: R. E. Abendroth

Publisher:

Published: 1991

Total Pages: 214

ISBN-13:

DOWNLOAD EBOOK

Each year several prestressed concrete girder bridges in Iowa and other states are struck and damaged by vehicles with loads too high to pass under the bridge. Whether or not intermediate diaphragms play a significant role in reducing the effect of these unusual loading conditions has often been a topic of discussion. A study of the effects of the type and location of intermediate diaphragms in prestressed concrete girder bridges when the bridge girder flanges were subjected to various levels of vertical and horizontal loading was undertaken. The purpose of the research was to determine whether steel diaphragms of any conventional configuration can provide adequate protection to minimize the damage to prestressed concrete girders caused by lateral loads, similar to the protection provided by the reinforced concrete intermediate diaphragms presently being used by the Iowa Department of Transportation. The research program conducted and described in this report included the following: A comprehensive literature search and survey questionnaire were undertaken to define the state-of-the-art in the use of intermediate diaphragms in prestressed concrete girder bridges. A full scale, simple span, restressed concrete girder bridge model, containing three beams was constructed and tested with several types of intermediate diaphragms located at the one-third points of the span or at the mid-span. Analytical studies involving a three-dimensional finite element analysis model were used to provide additional information on the behavior of the experimental bridge. The performance of the bridge with no intermediate diaphragms was quite different than that with intermediate diaphragms in place. All intermediate diaphragms tested had some effect in distributing the loads to the slab and other girders, although some diaphragm types performed better than others. The research conducted has indicated that the replacement of the reinforced concrete intermediate diaphragms currently being used in Iowa with structural steel diaphragms may be possible.


Development of Design Specifications and Commentary for Horizontally Curved Concrete Box-girder Bridges

Development of Design Specifications and Commentary for Horizontally Curved Concrete Box-girder Bridges

Author: Nutt, Redfield, and Valentine

Publisher: Transportation Research Board

Published: 2008

Total Pages: 97

ISBN-13: 030911750X

DOWNLOAD EBOOK

This report provides specifications, commentary, and examples for the design of horizontally curved concrete box-girder highway bridges. The report details the development of the design procedures. Recommended Load and Resistance Factor Design (LRFD) specifications and design examples illustrating the application of the design methods and specifications are included in appendixes (available on the TRB website at http://trb.org/news/blurb_detail.asp?id=9596).


Prestressed Concrete Bridges

Prestressed Concrete Bridges

Author: Christian Menn

Publisher: Birkhäuser

Published: 2012-12-06

Total Pages: 546

ISBN-13: 3034891318

DOWNLOAD EBOOK

This book was written to make the material presented in my book, Stahlbetonbrucken, accessible to a larger number of engineers throughout the world. A work in English, the logical choice for this task, had been contemplated as Stahlbetonbrucken was still in its earliest stages of preparation. The early success of Stahlbetonbrucken provided significant impetus for the writing of Prestressed Concrete Bridges, which began soon after the publication of its predecessor. The present work is more than a mere translation of Stahlbetonbrucken. Errors in Stahlbetonbrucken that were detected after publication have been corrected. New material on the relation between cracking in concrete and corrosion of reinforce ment, prestressing with unbonded tendons, skew-girder bridges, and cable-stayed bridges has been added. Most importantly, however, the presentation of the material has been extensively reworked to improve clarity and consistency. Prestressed Concrete Bridges can thus be regarded as a thoroughly new and improved edition of its predecessor.


Seismic Design Aids for Nonlinear Pushover Analysis of Reinforced Concrete and Steel Bridges

Seismic Design Aids for Nonlinear Pushover Analysis of Reinforced Concrete and Steel Bridges

Author: Jeffrey Ger

Publisher: CRC Press

Published: 2016-04-19

Total Pages: 396

ISBN-13: 1439837759

DOWNLOAD EBOOK

Nonlinear static monotonic (pushover) analysis has become a common practice in performance-based bridge seismic design. The popularity of pushover analysis is due to its ability to identify the failure modes and the design limit states of bridge piers and to provide the progressive collapse sequence of damaged bridges when subjected to major earthq


Highway Bridge Superstructure Engineering

Highway Bridge Superstructure Engineering

Author: Narendra Taly

Publisher: CRC Press

Published: 2014-11-21

Total Pages: 951

ISBN-13: 1466552190

DOWNLOAD EBOOK

A How-To Guide for Bridge Engineers and DesignersHighway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis provides a detailed discussion of traditional structural design perspectives, and serves as a state-of-the-art resource on the latest design and analysis of highway bridge superstructures. This book is applicable to hig