Simulation of Material Design of Flat Rolled Steel Manufacturing for Improved Productivity
Author: Jacqueline O. Hoerger
Publisher:
Published: 1989
Total Pages: 198
ISBN-13:
DOWNLOAD EBOOKPosts
Masters Theses in the Pure and Applied Sciences
Author: Wade H. Shafer
Publisher: Springer Science & Business Media
Published: 2012-12-06
Total Pages: 430
ISBN-13: 1461573947
DOWNLOAD EBOOKMasters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Oata Analysis and Synthesis (CINOAS) * at Purdue. University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 33 (thesis year 1988) a total of 13,273 theses titles from 23 Canadian and 1 85 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 33 reports theses submitted in 1988, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Simulation of Material Processing: Theory, Methods and Application
Author: Ken-ichiro Mori
Publisher: CRC Press
Published: 2001-01-01
Total Pages: 1170
ISBN-13: 9789026518225
DOWNLOAD EBOOKThis volume contains about 180 papers including seven keynotes presented at the 7th NUMIFORM Conference. It reflects the state-of-the-art of simulation of industrial forming processes such as rolling, forging, sheet metal forming, injection moulding and casting.
Modeling and Simulation for Material Selection and Mechanical Design
Author: George E. Totten
Publisher: CRC Press
Published: 2003-12-02
Total Pages: 493
ISBN-13: 0824758765
DOWNLOAD EBOOKThis reference describes advanced computer modeling and simulation procedures to predict material properties and component design including mechanical properties, microstructural evolution, and materials behavior and performance. The book illustrates the most effective modeling and simulation technologies relating to surface-engineered compounds, fastener design, quenching and tempering during heat treatment, and residual stresses and distortion during forging, casting, and heat treatment. Written by internationally recognized experts in the field, it enables researchers to enhance engineering processes and reduce production costs in materials and component development.
Metallurgical Design of Flat Rolled Steels
Author: Vladimir B. Ginzburg
Publisher: CRC Press
Published: 2020-11-25
Total Pages: 726
ISBN-13: 0849337984
DOWNLOAD EBOOKThis book outlines the basic principles of metallurgical design of flat rolled steels to obtain flat steel products with required metallurgical and mechanical properties. These principles establish the requirements for steel chemical composition and the process parameters, including steelmaking, reheating, hot rolling, annealing and cold rolling. Metallurgical Design of Flat Rolled Steels reviews the current theories and experimental works conducted in this area, and gives a comparative analysis of the obtained results in application to a large variety of steels produced around the world. This guide presents essential material in a fashion that permits rapid application to practical problems while providing the structure and understanding necessary for long-term growth. It first explains how the components fit and work together to make a successful experimental design, then analyzes each component in detail, presenting the various approaches in the form of menus of different strategies and options. Then the text illustrates equations developed by various researchers and compares them in both table and graphic forms. Written in a clear and concise manner, the material is presented using a modular or "building block" approach so readers get to see how the entire structure fits together and learn the essential techniques and terminology necessary to develop more complex designs and analyses.
Flat Rolling Fundamentals
Author: Vladimir B. Ginzburg
Publisher: CRC Press
Published: 2000-06-30
Total Pages: 860
ISBN-13: 9780824788940
DOWNLOAD EBOOKThis volume compiles information from physics, metallurgy, and mechanical and electrical engineering to epitomize the fundamental characteristics of flat rolling steel. Flat Rolling Fundamentals is drawn from in-depth analyses of metal properties and behaviors to technologies in application. The book provides a full characterization of steel, including structure, chemical composition, classifications, physical properties, deformation, and plasticity. The authors present different types of rolling mills and the defining physical analytical parameters.They also discuss the effects of hot rolling on steel and the role of lubrication and thermomechanical treatments to minimize these effects. This book presents qualitative and quantitative advances in cost-effective steel production.
Flat-Rolled Steel Processes
Author: Vladimir B. Ginzburg
Publisher: CRC Press
Published: 2009-05-28
Total Pages: 380
ISBN-13: 1420072935
DOWNLOAD EBOOKThroughout the last two decades, the flat-steel production industry has experienced great success with the introduction of new technologies and manufacturing advances for both hot and cold steel-rolling. These improvements are resulting in significantly reduced production costs and better product quality. Recent consolidation of the steel industry-
Modeling And Simulation Based Systems Engineering: Theory And Practice
Author: Lin Zhang
Publisher: World Scientific
Published: 2023-02-02
Total Pages: 270
ISBN-13: 9811260192
DOWNLOAD EBOOKModeling and simulation (M&S) based systems engineering (MSBSE) is the extension of MBSE, which enhances the value of MBSE and the ability of digitally evaluating and optimizing the whole system through comprehensive applications of M&S technologies. This book puts together the recent research in MSBSE, and hopefully this will provide the researchers and engineers with reference cases in M&S technologies to support the R&D of complex products and systems.
Materials, Design and Manufacturing for Lightweight Vehicles
Author: P.K. Mallick
Publisher: Woodhead Publishing
Published: 2020-09-26
Total Pages: 506
ISBN-13: 0128190299
DOWNLOAD EBOOKMaterials, Design and Manufacturing for Lightweight Vehicles, Second Edition, features the requirements for processing each material type, explains the manufacture of different categories of components, and analyzes different component joining techniques. The properties of all materials, metals, polymers and composites currently used are included along with how each one influences structural design. The new edition also contains refinements to manufacturing processes in particular hot stamping of boron steel and aluminum alloy, and new chapters on designing lightweight automotive structures & lightweight materials for powertrains and electric vehicles. With its distinguished editor and renowned team of contributors, this is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. - Fully updated including emphasis on optimized production methods for steels, aluminum alloys, polymers and polymer composite - Covers aspects related to the production of environmentally acceptable leading-edge automobiles - Explores the manufacturing process for light alloys including metal forming processes for automotive applications as well as new developments in steel technology that are making advanced high strength steels more attractive for lightweight vehicles
Architecting Robust Co-Design of Materials, Products, and Manufacturing Processes
Author: Anand Balu Nellippallil
Publisher: Springer Nature
Published: 2020-06-13
Total Pages: 368
ISBN-13: 3030453243
DOWNLOAD EBOOKThis book explores systems-based, co-design, introducing a “Decision-Based, Co-Design” (DBCD) approach for the co-design of materials, products, and processes. In recent years there have been significant advances in modeling and simulation of material behavior, from the smallest atomic scale to the macro scale. However, the uncertainties associated with these approaches and models across different scales need to be addressed to enable decision-making resulting in designs that are robust, that is, relatively insensitive to uncertainties. An approach that facilitates co-design is needed across material, product design and manufacturing processes. This book describes a cloud-based platform to support decisions in the design of engineered systems (CB-PDSIDES), which feature an architecture that promotes co-design through the servitization of decision-making, knowledge capture and use templates that allow previous solutions to be reused. Placing the platform in the cloud aids mass collaboration and open innovation. A valuable reference resource reference on all areas related to the design of materials, products and processes, the book appeals to material scientists, design engineers and all those involved in the emerging interdisciplinary field of integrated computational materials engineering (ICME).
