Signal Processing and Integrated Circuits
Signal Processing and Integrated Circuits

Author: Hussein Baher

Publisher: John Wiley & Sons

Published: 2012-03-06

Total Pages: 474

ISBN-13: 1119942683

DOWNLOAD EBOOK

This book provides a balanced account of analog, digital and mixed-mode signal processing with applications in telecommunications. Part I Perspective gives an overview of the areas of Systems on a Chip (Soc) and mobile communication which are used to demonstrate the complementary relationship between analog and digital systems. Part II Analog (continuous-time) and Digital Signal Processing contains both fundamental and advanced analysis, and design techniques, of analog and digital systems. This includes analog and digital filter design; fast Fourier transform (FFT) algorithms; stochastic signals; linear estimation and adaptive filters. Part III Analog MOS Integrated Circuits for Signal Processing covers basic MOS transistor operation and fabrication through to the design of complex integrated circuits such as high performance Op Amps, Operational Transconductance Amplifiers (OTA's) and Gm-C circuits. Part IV Switched-capacitor and Mixed-mode Signal Processing outlines the design of switched-capacitor filters, and concludes with sigma-delta data converters as an extensive application of analog and digital signal processing Contains the fundamentals and advanced techniques of continuous-time and discrete-time signal processing. Presents in detail the design of analog MOS integrated circuits for signal processing, with application to the design of switched-capacitor filters. Uses the comprehensive design of integrated sigma-delta data converters to illustrate and unify the techniques of signal processing. Includes solved examples, end of chapter problems and MATLAB® throughout the book, to help readers understand the mathematical complexities of signal processing. The treatment of the topic is at the senior undergraduate to graduate and professional levels, with sufficient introductory material for the book to be used as a self-contained reference.

DSP Integrated Circuits
DSP Integrated Circuits

Author: Lars Wanhammar

Publisher: Elsevier

Published: 1999-02-24

Total Pages: 577

ISBN-13: 0080504779

DOWNLOAD EBOOK

DSP Integrated Circuits establishes the essential interface between theory of digital signal processing algorithms and their implementation in full-custom CMOS technology. With an emphasis on techniques for co-design of DSP algorithms and hardware in order to achieve high performance in terms of throughput, low power consumption, and design effort, this book provides the professional engineer, researcher, and student with a firm foundation in the theoretical as well as the practical aspects of designing high performance DSP integrated circuits. Centered around three design case studies, DSP Integrated Circuits thoroughly details a high-performance FFT processor, a 2-D Discrete Cosine Transform for HDTV, and a wave digital filter for interpolation of the sampling frequency. The case studies cover the essential parts of the design process in a top-down manner, from specification of algorithm design and optimization, scheduling of operations, synthesis of optimal architectures, realization of processing elements, to the floor-planning of the integrated circuit. Details the theory and design of digital filters - particularly wave digital filters, multi-rate digital filters, fast Fourier transforms (FFT's), and discrete cosine transforms (DCT's) Follows three complete "real-world" case studies throughout the book Provides complete coverage of finite word length effects in DSP algorithms In-depth survey of the computational properties of DSP algorithms and their mapping to optimal architectures Outlines DSP architectures and parallel, bit-serial, and distributed arithmetic Presents the design process in a top-down manner and incorporates numerous problems and solutions

Integrated Circuits for Analog Signal Processing
Integrated Circuits for Analog Signal Processing

Author: Esteban Tlelo-Cuautle

Publisher: Springer Science & Business Media

Published: 2012-07-27

Total Pages: 327

ISBN-13: 1461413834

DOWNLOAD EBOOK

This book presents theory, design methods and novel applications for integrated circuits for analog signal processing. The discussion covers a wide variety of active devices, active elements and amplifiers, working in voltage mode, current mode and mixed mode. This includes voltage operational amplifiers, current operational amplifiers, operational transconductance amplifiers, operational transresistance amplifiers, current conveyors, current differencing transconductance amplifiers, etc. Design methods and challenges posed by nanometer technology are discussed and applications described, including signal amplification, filtering, data acquisition systems such as neural recording, sensor conditioning such as biomedical implants, actuator conditioning, noise generators, oscillators, mixers, etc. Presents analysis and synthesis methods to generate all circuit topologies from which the designer can select the best one for the desired application; Includes design guidelines for active devices/elements with low voltage and low power constraints; Offers guidelines for selecting the right active devices/elements in the design of linear and nonlinear circuits; Discusses optimization of the active devices/elements for process and manufacturing issues of nanometer technology.

EMC of Analog Integrated Circuits
EMC of Analog Integrated Circuits

Author: Jean-Michel Redouté

Publisher: Springer Science & Business Media

Published: 2009-10-10

Total Pages: 249

ISBN-13: 9048132304

DOWNLOAD EBOOK

Environmental electromagnetic pollution has drastically increased over the last decades. The omnipresence of communication systems, various electronic appliances and the use of ever increasing frequencies, all contribute to a noisy electromagnetic environment which acts detrimentally on sensitive electronic equipment. Integrated circuits must be able to operate satisfactorily while cohabiting harmoniously in the same appliance, and not generate intolerable levels of electromagnetic emission, while maintaining a sound immunity to potential electromagnetic disturbances: analog integrated circuits are in particular more easily disturbed than their digital counterparts, since they don't have the benefit of dealing with predefined levels ensuring an innate immunity to disturbances. The objective of the research domain presented in EMC of Analog Integrated Circuits is to improve the electromagnetic immunity of considered analog integrated circuits, so that they start to fail at relevantly higher conduction levels than before.

Signal Processing and Analysis of Electrical Circuit
Signal Processing and Analysis of Electrical Circuit

Author: Adam Glowacz

Publisher: MDPI

Published: 2020-03-13

Total Pages: 604

ISBN-13: 3039282948

DOWNLOAD EBOOK

This Special Issue with 35 published articles shows the significance of the topic “Signal Processing and Analysis of Electrical Circuit”. This topic has been gaining increasing attention in recent times. The presented articles can be categorized into four different areas: signal processing and analysis methods of electrical circuits; electrical measurement technology; applications of signal processing of electrical equipment; fault diagnosis of electrical circuits. It is a fact that the development of electrical systems, signal processing methods, and circuits has been accelerating. Electronics applications related to electrical circuits and signal processing methods have gained noticeable attention in recent times. The methods of signal processing and electrical circuits are widely used by engineers and scientists all over the world. The constituent papers represent a significant contribution to electronics and present applications that can be used in industry. Further improvements to the presented approaches are required for realizing their full potential.

Analog Electronics
Analog Electronics

Author: David Crecraft

Publisher: Elsevier

Published: 2002-05-21

Total Pages: 437

ISBN-13: 0080475833

DOWNLOAD EBOOK

The content has been carefully designed to meet the requirements of first and second year students of electronic engineering, communications engineering and telecommunications, following full honours degree programs or two-year courses including HNC/HND. - A completely new analog electronics textbook for the digital age - Coverage ideal for courses with a communications / wireless focus

ANALOG MOS INTEGRATED CIRCUITS FOR SIGNAL PROCESSING
ANALOG MOS INTEGRATED CIRCUITS FOR SIGNAL PROCESSING

Author: Roubik Gregorian

Publisher:

Published: 2008-09-01

Total Pages: 616

ISBN-13: 9788126517978

DOWNLOAD EBOOK

Market_Desc: · Engineers· Managers· Technicians About The Book: The book describes the operating principles of analog MOS integrated circuits and how to design and use such circuits. The initial section explores general properties of analog MOS integrated circuits and the math and physics background required. The remainder of the book is devoted to the design of circuits. It includes such devices as switched-capacitor filters, analog-to-digital and digital-to-analog converters, amplifiers, modulators, oscillators, and others. Tables and numerical design examples clarify the step-by-step processes involved. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.

Precision Instrumentation Amplifiers and Read-Out Integrated Circuits
Precision Instrumentation Amplifiers and Read-Out Integrated Circuits

Author: Rong Wu

Publisher: Springer Science & Business Media

Published: 2012-07-25

Total Pages: 199

ISBN-13: 1461437318

DOWNLOAD EBOOK

This book presents innovative solutions in the design of precision instrumentation amplifier and read-out ICs, which can be used to boost millivolt-level signals transmitted by modern sensors, to levels compatible with the input ranges of typical Analog-to-Digital Converters (ADCs). The discussion includes the theory, design and realization of interface electronics for bridge transducers and thermocouples. It describes the use of power efficient techniques to mitigate low frequency errors, resulting in interface electronics with high accuracy, low noise and low drift. Since this book is mainly about techniques for eliminating low frequency errors, it describes the nature of these errors and the associated dynamic offset cancellation techniques used to mitigate them.

Ultra-Low Power Integrated Circuit Design
Ultra-Low Power Integrated Circuit Design

Author: Nianxiong Nick Tan

Publisher: Springer Science & Business Media

Published: 2013-10-23

Total Pages: 236

ISBN-13: 1441999736

DOWNLOAD EBOOK

This book describes the design of CMOS circuits for ultra-low power consumption including analog, radio frequency (RF), and digital signal processing circuits (DSP). The book addresses issues from circuit and system design to production design, and applies the ultra-low power circuits described to systems for digital hearing aids and capsule endoscope devices. Provides a valuable introduction to ultra-low power circuit design, aimed at practicing design engineers; Describes all key building blocks of ultra-low power circuits, from a systems perspective; Applies circuits and systems described to real product examples such as hearing aids and capsule endoscopes.

Analog Signal Processing
Analog Signal Processing

Author: Ramón Pallás-Areny

Publisher: John Wiley & Sons

Published: 1999-02-05

Total Pages: 608

ISBN-13: 9780471125280

DOWNLOAD EBOOK

A proven, cost-effective approach to solving analog signal processing design problems Most design problems involving analog circuits require a great deal of creativity to solve. But, as the authors of this groundbreaking guide demonstrate, finding solutions to most analog signal processing problems does not have to be that difficult. Analog Signal Processing presents an original, five-step, design-oriented approach to solving analog signal processing problems using standard ICs as building blocks. Unlike most authors who prescribe a "bottom-up" approach, Professors Pallás-Areny and Webster cast design problems first in functional terms and then develop possible solutions using available ICs, focusing on circuit performance rather than internal structure. The five steps of their approach move from signal classification, definition of desired functions, and description of analog domain conversions to error classification and error analysis. Featuring 90 worked examples-many of them drawn from actual implementations-and more than 130 skill-building chapter-end problems, Analog Signal Processing is both a valuable working resource for practicing design engineers and a textbook for advanced courses in electronic instrumentation design.