Safety Evaluation of Centerline Rumble Strips
Author: David A. Noyce
Publisher:
Published: 2003
Total Pages: 120
ISBN-13:
DOWNLOAD EBOOKRead and Download eBook Full
Author: David A. Noyce
Publisher:
Published: 2003
Total Pages: 120
ISBN-13:
DOWNLOAD EBOOKAuthor: Darren J. Torbic
Publisher: Transportation Research Board
Published: 2009
Total Pages: 284
ISBN-13: 0309117992
DOWNLOAD EBOOKThis report provides guidance for the design and application of shoulder and centerline rumble strips as an effective crash reduction measure, while minimizing adverse effects for motorcyclists, bicyclists, and nearby residents. Using the results of previous studies and the research conducted under this project, safety effectiveness estimates were developed for shoulder rumble strips on rural freeways and rural two-lane roads and for centerline rumble strips on rural and urban two-lane roads.
Author: Darren J. Torbic
Publisher: Transportation Research Board National Research
Published: 2009
Total Pages: 188
ISBN-13:
DOWNLOAD EBOOKThis report provides guidance for the design and application of shoulder and centerline rumble strips as an effective crash reduction measure, while minimizing adverse effects for motorcyclists, bicyclists, and nearby residents. Using the results of previous studies and the research conducted under this project, safety effectiveness estimates were developed for shoulder rumble strips on rural freeways and rural two-lane roads and for centerline rumble strips on rural and urban two-lane roads.
Author:
Publisher:
Published: 2003
Total Pages: 50
ISBN-13:
DOWNLOAD EBOOKAuthor: Chung S. Chen
Publisher:
Published: 2005
Total Pages: 50
ISBN-13:
DOWNLOAD EBOOKFollowing the wide and successful use of continuous shoulder rumble strips, many state departments of transportations (DOTs) installed centerline rumble strips (CLRS) on rural two-lane and undivided multilane highways in an effort to reduce cross-over-the-centerline (COCL) crashes. COCL crashes include head-on, sideswipe opposite direction, fixed object run-off-the-road left, and non-collision. The purpose of this research was to develop guidelines for using CLRS in Virginia based on a review of best practices and the analysis of Virginia COCL crash data from 2001 through 2003. The analysis procedures included data query and analyses of crash frequency, density, and rate. Areas and route locations with the highest COCL crashes and densities were identified as potential candidate sites for CLRS. As of 2003, 24 state DOTs and two Canadian provinces were using CLRS. They are generally installed on a case-by-case basis. CLRS design patterns vary greatly among states, but the most commonly used types are continuous grooves 12 to 16 inches in length, 6 to 7 inches in width, and 0.5 inch in depth spaced 12 or 24 inches apart. The optimal CLRS patterns remain unknown. Data analyses revealed that the distribution of COCL crashes in Virginia varied significantly with roadway system, road type, jurisdictional area, and road location. The statewide COCL crash densities were 0.13 and 0.71 crash per mile for secondary and primary roads, respectively. Fixed object run-off-the-road left was the predominant type of COCL crash followed by sideswipe opposite direction and head-on for undivided roads. The crash density of the primary system was 4.5 times higher than that of the secondary system. Guidelines were developed that outline the application of CLRS, design dimensions, installation and maintenance, and other issues. The authors recommend that the Virginia Department of Transportation's Traffic Engineering Division implement the guidelines as a division memorandum. Although a benefit-cost ratio for this recommendation will vary with each site, a sample estimated benefit-cost ratio was at least 7.6 per mile.
Author: John L. Campbell
Publisher: Transportation Research Board
Published: 2010
Total Pages: 111
ISBN-13: 0309154693
DOWNLOAD EBOOKNCHRP report 600 explores human factors principles and findings for consideration by highway designers and traffic engineers. The report is designed to help the nonexpert in human factors to consider more effectively the roadway user's capabilities and limitations in the design and operation of highway facilities.
Author: Lee August Rodegerdts
Publisher: Transportation Research Board
Published: 2010
Total Pages: 407
ISBN-13: 0309155118
DOWNLOAD EBOOKTRB's National Cooperative Highway Research Program (NCHRP) Report 672: Roundabouts: An Informational Guide - Second Edition explores the planning, design, construction, maintenance, and operation of roundabouts. The report also addresses issues that may be useful in helping to explain the trade-offs associated with roundabouts. This report updates the U.S. Federal Highway Administration's Roundabouts: An Informational Guide, based on experience gained in the United States since that guide was published in 2000.
Author: Michael J. Markow
Publisher: Transportation Research Board
Published: 2012
Total Pages: 127
ISBN-13: 0309223431
DOWNLOAD EBOOKTRB’s National Cooperative Highway Research Program (NCHRP) Synthesis 424: Engineering Economic Analysis Practices for Highway Investment explores how U.S. transportation agencies have applied engineering economics--benefit–cost analyses and similar procedures--to decisions on highway investments.
Author: ITE (Institute of Transportation Engineers)
Publisher: John Wiley & Sons
Published: 2016-01-19
Total Pages: 688
ISBN-13: 1118762266
DOWNLOAD EBOOKGet a complete look into modern traffic engineering solutions Traffic Engineering Handbook, Seventh Edition is a newly revised text that builds upon the reputation as the go-to source of essential traffic engineering solutions that this book has maintained for the past 70 years. The updated content reflects changes in key industry standards, and shines a spotlight on the needs of all users, the design of context-sensitive roadways, and the development of more sustainable transportation solutions. Additionally, this resource features a new organizational structure that promotes a more functionally-driven, multimodal approach to planning, designing, and implementing transportation solutions. A branch of civil engineering, traffic engineering concerns the safe and efficient movement of people and goods along roadways. Traffic flow, road geometry, sidewalks, crosswalks, cycle facilities, shared lane markings, traffic signs, traffic lights, and more—all of these elements must be considered when designing public and private sector transportation solutions. Explore the fundamental concepts of traffic engineering as they relate to operation, design, and management Access updated content that reflects changes in key industry-leading resources, such as the Highway Capacity Manual (HCM), Manual on Uniform Traffic Control Devices (MUTCD), AASSHTO Policy on Geometric Design, Highway Safety Manual (HSM), and Americans with Disabilities Act Understand the current state of the traffic engineering field Leverage revised information that homes in on the key topics most relevant to traffic engineering in today's world, such as context-sensitive roadways and sustainable transportation solutions Traffic Engineering Handbook, Seventh Edition is an essential text for public and private sector transportation practitioners, transportation decision makers, public officials, and even upper-level undergraduate and graduate students who are studying transportation engineering.