The book presents the recent advancements in the area of sensors and sensing technology, specifically in environmental monitoring, structural health monitoring, dielectric, magnetic, electrochemical, ultrasonic, microfluidic, flow, surface acoustic wave, gas, cloud computing and bio-medical. This book will be useful to a variety of readers, namely, Master and PhD degree students, researchers, practitioners, working on sensors and sensing technology. The book will provide an opportunity of a dedicated and a deep approach in order to improve their knowledge in this specific field.
This Special Issue titled "Recent Advances in Sensing Technology" in the book series of "Lecture Notes in Electrical Engineering" contains the extended version of the papers selected from those that were presented at the 3rd International Conference on Sensing Technology (ICST 2008) which was held in November 30 to December 3, 2008 at National Cheng-Kung University, Tainan, Taiwan. A total of 131 papers were presented at ICST 2008, of which 19 papers have been selected for this special issue. This Special Issue has focussed on the recent advancements of the different aspects of sensing technology, i.e. information processing, adaptability, recalibration, data fusion, validation, high reliability and integration of novel and high performance sensors. The advancements are in the areas of magnetic, ultrasonic, vision and image sensing, wireless sensors and network, microfluidic, tactile, gyro, flow, surface acoustic wave, humidity, gas, MEMS thermal and ultra-wide band. While future interest in this field is ensured by the constant supply of emerging modalities, techniques and engineering solutions, many of the basic concepts and strategies have already matured and now offer opportunities to build upon.
Sensors are integral to modern living and are found in a huge number of applications in science, engineering and technology thus it is critical for scientists and technologists to understand the physical principles behind sensor types as well as their characteristics, applications, and how they can be suitably employed in sensor technologies. Whilst there exists a vast literature on the physics and characteristics of traditional sensors, this book provides a broad overview of the range of sensor technologies and attendant topics needed to optimise and utilise these devices in the modern world. Not only reviewing sensors by classification, the book encompasses the physics, design characteristics, simulation and interface electronics, and it includes case studies, future challenges and several other aspects of wider sensor technology to provide an overview of modern sensors and their applications. The broad scope will appeal to industrial and academic researchers and application engineers, especially those developing and implementing real-time hardware implementations employing smart sensors for emerging applications. Key Features Features a broad review of sensor types, including MEMS, wearable and smart sensors Presents application of modern sensors and emerging research directions Incorporates case studies Reviews wider associated technologies such as simulation, materials and interface electronics Interdisciplinary appeal making the text suitable for industrial and academic researchers as well as application engineers
Advances in materials science and engineering have paved the way for the development of new and more capable sensors. Drawing upon case studies from manufacturing and structural monitoring and involving chemical and long wave-length infrared sensors, this book suggests an approach that frames the relevant technical issues in such a way as to expedite the consideration of new and novel sensor materials. It enables a multidisciplinary approach for identifying opportunities and making realistic assessments of technical risk and could be used to guide relevant research and development in sensor technologies.
The aim of this Printed Edition of Special Issue entitled "Recent Advancements in Radar Imaging and Sensing Technology” was to gather the latest research results in the area of modern radar technology using active and/or radar imaging sensing techniques in different applications, including both military use and a broad spectrum of civilian applications. As a result, the 19 papers that have been published highlighted a variety of topics related to modern radar imaging and microwave sensing technology. The sequence of articles included in the Printed Edition of Special Issue dealt with wide aspects of different applications of radar imaging and sensing technology in the area of topics including high-resolution radar imaging, novel Synthetic Apertura Radar (SAR) and Inverse SAR (ISAR) imaging techniques, passive radar imaging technology, modern civilian applications of using radar technology for sensing, multiply-input multiply-output (MIMO) SAR imaging, tomography imaging, among others.
Sensing Approaches for Precision Agriculture aims to bring together the ‘state of the art’ of the most popular sensing techniques and the current state of research on the application of sensors in Precision Agriculture (PA). Sensing is of great value in PA because it provides cheap and immediate data for management. This book gives a broad overview of sensing in PA and a coherent introduction for new professionals and research scientists. Readers are introduced to the potential applications of a range of different sensors, how they should be used properly and their limitations for use in PA. Chapters on specific topics and case studies provide depth and enable implementation of the methods by users. A general introduction about sensing techniques in PA is followed by Chapters 2–9 on the most important specific techniques in sensing and Chapters 10–13 include mini-case studies, each showing cutting-edge applications for different sensing methods. Finally, there is an Epilogue on how we expect sensors and analysis to develop.
Sponsored by the Embankments, Dams, and Slopes Technical Committee of the Geo-Institute of ASCE Remote Sensing for Monitoring Embankments, Dams, and Slopes: Recent Advances, GSP 322, provides information on selecting and deploying a monitoring network to assess the behavior, geometry, total and differential EDS movement, and potential risks of the EDS movement on people and infrastructure. Topics include general technologies used for EDS monitoring, selection and installation of networked sensors for predictive analytics and image recognition, application of monitoring techniques in the design of early warning systems, case studies, and support for decision-makers in implementing early warning systems. Information on a broad range of technologies, such as radio detection and ranging (radar), synthetic aperture radar (SAR), interferometric synthetic aperture radar (InSAR), light detection and ranging (LiDAR), digital photogrammetry and image processing, microelectromechanical systems (MEMS), automatic motorized total stations (AMTS), and unmanned aircraft systems (UAS) to deploy the remote sensing technologies is also included. This Geotechnical Special Publication will be useful to both practitioners and researchers to understand and utilize currently available remote sensing technology and to advance and refine the monitoring of embankments, dams, and slopes.
Sensing and Monitoring Technologies for Mines and Hazardous Areas: Monitoring and Prediction Technologies presents the fundamentals of mining related geotechnical risk and how the latest advances in sensing and data communication can be used both to prevent accidents and provide early warnings. Opencast mining operations involve huge quantities of overburden removal, dumping, and backfilling in excavated areas. Substantial increases in the rate of accumulation of waste dumps in recent years has resulted in greater height of dumps and also has given rise to the danger of dump failures as steeper open pit slopes are prone to failure. These failures lead to loss of valuable human lives and damage to mining machinery. This book presents the most recent advances in gas sensors, methane detectors, and power cut-off systems. It also introduces monitoring of the gas strata and environment, and an overview of the use of Internet of Things and cloud computing for mining sensing and surveillance purposes. Targeted at geotechnical and mining engineers, this volume covers the latest findings and technology to prevent mining accidents and mitigate the inherent risk of the activity. - Presents complete details of a real-time slope stability monitoring system using wireless sensor networking and prediction technique based on multivariate statistical analysis of various parameters and analytical hierarchy process methods - Discusses innovative ideas and new concepts of sensing technologies, mine transport surveillance, digital mining, and cloud computing to improve safety and productivity in mining industry - Includes slope stability prediction software, downloadable through a companion website, which can be used for monitoring, analyzing, and storing different sensors and providing audio-visual, SMS, and email alerts - Covers the latest findings and technology to prevent mining accidents and mitigate the inherent risk
Fundamentals and Sensing Applications of 2D Materials provides a comprehensive understanding of a wide range of 2D materials. Examples of fundamental topics include: defect and vacancy engineering, doping and advantages of 2D materials for sensing, 2D materials and composites for sensing, and 2D materials in biosystems. A wide range of applications are addressed, such as gas sensors based on 2D materials, electrochemical glucose sensors, biosensors (enzymatic and non-enzymatic), and printed, stretchable, wearable and flexible biosensors. Due to their sub-nanometer thickness, 2D materials have a high packing density, thus making them suitable for the fabrication of thin film based sensor devices. Benefiting from their unique physical and chemical properties (e.g. strong mechanical strength, high surface area, unparalleled thermal conductivity, remarkable biocompatibility and ease of functionalization), 2D layered nanomaterials have shown great potential in designing high performance sensor devices. - Provides a comprehensive overview of 2D materials systems that are relevant to sensing, including transition metal dichalcogenides, metal oxides, graphene and other 2D materials system - Includes information on potential applications, such as flexible sensors, biosensors, optical sensors, electrochemical sensors, and more - Discusses graphene in terms of the lessons learned from this material for sensing applications and how these lessons can be applied to other 2D materials
Remote sensing was the primary data source since the launch of the first environmental monitoring satellite back in 1972. In the past five decades, remote sensing technology has come a long way and evolved into a mature science. Even so, new technologies, new theories, new methodologies, and new applications continue to emerge. With the rapid pace of technological advancement, it is essential to share experiences especially between different disciplines, either on breakthroughs in new theory or understanding, or applications of remote sensing on real world issues. Disciplines or fields covered in this book include geography, geology, agriculture, forestry, botany, and oceanography. Though remote sensing may be used differently in various disciplines, the principles are similar, if not the same. This book will be valuable to scientists, scholars, working professionals, or students who use remote sensing in their work, and are interested in learning how others use remote sensing in different ways.
