Modern production methods and environmental constraints demand chemical solutions. And as oilfields age, the need for chemicals to ensure steady production increases. Production Chemicals for the Oil and Gas Industry describes classes of production chemicals for use topside and downhole in the upstream oil and gas industry. It includes coverage of
Production chemistry issues result from changes in well stream fluids, both liquid and gaseous, during processing. Since crude oil production is characterized by variable production rates and unpredictable changes to the nature of the produced fluids, it is essential for production chemists to have a range of chemical additives available for rectifying issues that would not otherwise be fully resolved. Modern production methods, the need to upgrade crude oils of variable quality, and environmental constraints demand chemical solutions. Thus, oilfield production chemicals are necessary to overcome or minimize the effects of the production chemistry problems. Production Chemicals for the Oil and Gas Industry, Second Edition discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. Incorporating the large amount of research and applications since the first edition, this new edition reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references, especially SPE papers and patents. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance—information that is very useful for research and development. Each updated chapter begins by introducing a problem, such as scale or corrosion, for which there is a production chemical. The author then briefly discusses all chemical and nonchemical methods to treat the problem and provides in-depth descriptions of the structural classes of relevant production chemicals. He also mentions, when available, the environmental properties of chemicals and whether the chemical or technique has been successfully used in the field. This edition includes two new chapters and nearly 50 percent more references.
Production chemistry issues result from changes in well stream fluids, both liquid and gaseous, during processing. Since crude oil production is characterized by variable production rates and unpredictable changes to the nature of the produced fluids, it is essential for production chemists to have a range of chemical additives available for rectifying issues that would not otherwise be fully resolved. Modern production methods, the need to upgrade crude oils of variable quality, and environmental constraints demand chemical solutions. Thus, oilfield production chemicals are necessary to overcome or minimize the effects of the production chemistry problems. Production Chemicals for the Oil and Gas Industry, Second Edition discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. Incorporating the large amount of research and applications since the first edition, this new edition reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references, especially SPE papers and patents. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance-information that is very useful for research and development. Each updated chapter begins by introducing a problem, such as scale or corrosion, for which there is a production chemical. The author then briefly discusses all chemical and nonchemical methods to treat the problem and provides in-depth descriptions of the structural classes of relevant production chemicals. He also mentions, when available, the environmental properties of chemicals and whether the chemical or technique has been successfully used in the field. This edition includes two new chapters and nearly 50 percent more references.
Chemistry for Enhancing the Production of Oil and Gas provides an overview of the science and technology of the use of production chemicals to enhance and maintain oil and gas production. Geared towards a technically trained audience, this new book emphasizes the technical aspects of production management from the perspective of the upstream oil and gas industry. This new title delivers information as it relates to the production environment and problems that require chemical intervention, and thus, the need for the thousands of different chemicals that are in use. Readers will review the i.
Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control Handy index of chemical substances as well as a general chemical index
Oil field chemicals are gaining increasing importance, as the resources of crude oil are decreasing. An increasing demand of more sophisticated methods in the exploitation of the natural resources emerges for this reason. This book reviews the progress in the area of oil field chemicals and additives of the last decade from a rather chemical view. The material presented is a compilation from the literature by screening critically approximately 20,000 references. The text is ordered according to applications, just in the way how the jobs are emerging in practice. It starts with drilling, goes to productions and ends with oil spill. Several chemicals are used in multiple disciplines, and to those separate chapters are devoted. Two index registers are available, an index of chemical substances and a general index. * Gives an introduction to the chemically orientated petroleum engineer. * Provides the petroleum engineer involved with research and development with a quick reference tool. * Covers interdisciplinary matter, i.e. connects petroleum recovery and handling with chemical aspects.
In Chemistry of Petrochemical Processes, readers find a handy and valuable source of information containing insights into petrochemical reactions and products, process technology, and polymer synthesis. The book reviews and describes the reactions and processes involved in transforming petroleum-based hydrocarbons into the chemicals that form the basis of the multi-billion dollar petrochemical industry. In addition, the book includes information on new process developments for the production of raw materials and intermediates for petrochemicals that have surfaced since the book's first edition. Provides a quick understanding of the chemical reactions associated with oil and gas processing Contains insights into petrochemical reactions and products, process technology, and polymer synthesis
Written by an author with over 38 years of experience in the chemical and petrochemical process industry, this handbook will present an analysis of the process steps used to produce industrial hydrocarbons from various raw materials. It is the first book to offer a thorough analysis of external factors effecting production such as: cost, availability and environmental legislation. An A-Z list of raw materials and their properties are presented along with a commentary regarding their cost and availability. Specific processing operations described in the book include: distillation, thermal cracking and coking, catalytic methods, hydroprocesses, thermal and catalytic reforming, isomerization, alkylation processes, polymerization processes, solvent processes, water removal, fractionation and acid gas removal. Flow diagrams and descriptions of more than 250 leading-edge process technologies An analysis of chemical reactions and process steps that are required to produce chemicals from various raw materials Properties, availability and environmental impact of various raw materials used in hydrocarbon processing
Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.
