Wood products used in exterior applications must be protected against biodeterioration. Traditionally, wood products used CCA or the older inexpensive organic biocides, but environmental, disposal and governmental regulations have resulted in a rapid and dramatic worldwide shift. This book covers the many steps involved in developing a wood preservative and gives overviews on modified wood, wood deterioration, worldwide trends in wood protections, and mold in homes.
Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.
Stone is one of the oldest building materials, and its conservation ranks as one of the most challenging in the field. The use of alkoxysilanes in the conservation of stone can be traced as far back as 1861, when A. W. von Hoffman suggested their use for the deteriorating limestone on the Houses of Parliament in London. Alkoxysilane-based formulations have since become the material of choice for the consolidation of stone outdoors.^l This volume, the first to cover comprehensively alkoxysilanes in stone consolidation, synthesizes the subject's vast and extensive literature, which ranges from production of alkoxysilanes in the nineteenth century to the extensive contributions from sol-gel science in the 1980s and 90s. Included are a historical overview, an annotated bibliography, and discussions of the following topics: the chemistry and physics of alkoxysilanes and their gels; the influence of stone type; commercial and noncommercial formulations; practice; lab and field evaluation of service life; and recent developments. This book is designed for conservators, scientists, and preservation architects in the field of stone conservation and will also serve as an indispensable introduction to the subject for students of art conservation and historic preservation.
This book is exclusively concerned with wood modification, although many of these processes are generic and can be applied to other lignocellulosic materials. There have been many rapid developments in wood modification over the past decade and, in particular, there has been considerable progress made in the commercialisation of technologies. Topics covered include: The use of timber in the 21st century Modifying the properties of wood Chemical modification of wood: Acetic Anhydride Modification and reaction with other chemicals Thermal modification of wood Surface modification Impregnation modification Commercialisation of wood modification Environmental consideration and future developments This is the first time that a book has covered all wood modification technologies in one text. Although the book covers the main research developments in wood modification, it also puts wood modification into context and additionally deals with aspects of commercialisation and environmental impact. This book is very timely, because wood modification is undergoing huge developments at the present time, driven in part by environmental concerns regarding the use of wood treated with certain preservatives. There has been considerable commercial interest shown in wood modification over the past decade, with products based upon thermal modification, and furfurylation now being actively being marketed. The next few years will see the commercialisation of acetylation and impregnation modification. This is a new industry, but one that has enormous potential. This book will prove useful to all those with an interest in wood modification including researchers, technologists and professionals working in wood science and timber engineering, wood preservation, and well as professionals in the paper and pulp industries, and those with an interest in the development of renewable materials.
