Polymer Additive Analytics
Author: Jan C. J. Bart
Publisher: Firenze University Press
Published: 2006
Total Pages: 393
ISBN-13: 8884533791
DOWNLOAD EBOOKPosts
Additives in Polymers
Author: Jan C. J. Bart
Publisher: John Wiley & Sons
Published: 2005-04-08
Total Pages: 836
ISBN-13: 0470012056
DOWNLOAD EBOOKThis industrially relevant resource covers all established and emerging analytical methods for the deformulation of polymeric materials, with emphasis on the non-polymeric components. Each technique is evaluated on its technical and industrial merits. Emphasis is on understanding (principles and characteristics) and industrial applicability. Extensively illustrated throughout with over 200 figures, 400 tables, and 3,000 references.
Handbook for the Chemical Analysis of Plastic and Polymer Additives
Author: Michael Bolgar
Publisher: CRC Press
Published: 2015-09-25
Total Pages: 626
ISBN-13: 1439860750
DOWNLOAD EBOOKPolymers have undoubtedly changed the world through many products that improve our lives. However, additives used to modify the overall characteristics of these materials may not be fully disclosed or understood. These additives may present possible environmental and health hazards. It is important to monitor consumer products for these compounds u
Atlas of Plastics Additives
Author: Dietrich O. Hummel
Publisher: Springer Science & Business Media
Published: 2012-12-06
Total Pages: 538
ISBN-13: 3642562116
DOWNLOAD EBOOKA must for experts in industry, this book describes the application of vibrational (FTIR, UV, Raman) and mass spectrometries and other instrumental techniques for identification and structure elucidation of plastics additives. Numerous tables and figures compress the state of the art.
Practical Polymer Analysis
Author: T.R. Crompton
Publisher: Springer Science & Business Media
Published: 2012-12-06
Total Pages: 841
ISBN-13: 1461528747
DOWNLOAD EBOOKThe aim of this book is to familiarize the reader with the practical aspects of polymer analysis. A wealth of practical detail, including some detailed methods is included. The book covers not only the analysis of the main types of polymers and copolymers now in use commercially, but also the analysis of minor non-polymeric components of the polymer formulation, whether they be deliberately added, such as processing additives, or whether they occur adventitiously, such as moisture and residual monomers and solvent. A broad scheme for the examination of polymers is discussed in Chapter 2. Practically all of the major newer analytical techniques and many of the older classical techniques, have been used to examine polymers and their additive systems. As so many different polymers are now used commercially it is also advisable when attempting to identify a polymer to classify it by first separating it into pure polymeric and gross non polymeric fractions (Chapter Z) and then carrying out at least a qualitative elemental analysis and possible a quantitative analysis (Chapters 3 and 4) and then in some cases, depending on the elements found, to carry out functional group analysis (Chapters 6 and 9).
Additive Migration from Plastics Into Food
Author: T. R. Crompton
Publisher: Elsevier
Published: 2013-10-22
Total Pages: 247
ISBN-13: 1483157717
DOWNLOAD EBOOKAdditive Migration from Plastics Into Food examines the intrusion of foreign chemicals into food via additives present in plastics packaging and the toxic hazards they pose to consumers. This book shows how direct contact between the packed commodity and the plastic is likely to result in the transfer of polymer additives, adventitious impurities such as monomers, catalyst remnants, and residual polymerization solvents, and low-molecular-weight polymer fractions from the plastic into the packaged material. This book is comprised of nine chapters and begins with a discussion on the various types of plastics used in food packaging as well as the types of substances present in the plastic that might migrate into the food. Subsequent chapters review world literature on extraction testing and the analysis of extractants. The determination of various types of polymer additives and residual monomers in extractants of liquid foodstuffs and beverages, solid foods, edible oils, and fatty foodstuffs is considered. The final chapter looks at the legal requirements concerning the use of additives in food-grade plastics in various countries. This monograph will be of interest to those in the plastics industry, food and beverage packaging industry, and large retail outlets such as supermarkets, along with medical and public health officials, legislators, environmentalists, and the general public.
Polymer Additives
Author: Jiri E. Kresta
Publisher: Springer Science & Business Media
Published: 2012-12-06
Total Pages: 403
ISBN-13: 1461327970
DOWNLOAD EBOOKEver since the beginning of the plastics and rubber industry, it was realized that useful products could be produced only if cer tain additives were incorporated into polymers. With the help of these additives, when physically dispersed in a polymer matrix, it has been possible to improve stability against thermal, oxidative, UV, hydrolytic and biological degradation, mechanical properties, flammability, cost, and processibility of plastics. The enormous growth of the volume of plastics consumed by modern society, and new application areas for plastics, have created a demand for new, better additives and better understanding of their functions in polymer systems. As a result of these trends there is a need for sharing of information on progress achieved in the area of polymer additives among engineers and scientists of the plastics industry and academia. This book is based on expanded and updated papers originally presented at the International Symposium on Polymer Additives, which was held in Las Vegas, Nevada, and was sponsored by the American Chemical Society, Division of Polymeric Materials Science and Engi neering. The book is divided into five parts which cover advances in various areas of polymer additives. The first part is devoted to the progress in understanding of UV degradation and stabilization of various polymers. Oxidation degradation and stabilization of plastic materials is covered in the second part. New developments in the stabilization of PVC are presented in the third part.
Structure and Properties of Additive Manufactured Polymer Components
Author: Klaus Friedrich
Publisher: Woodhead Publishing
Published: 2020-06-18
Total Pages: 462
ISBN-13: 0128196831
DOWNLOAD EBOOKStructure and Properties of Additive Manufactured Polymer Components provides a state-of-the-art review from leading experts in the field who discuss key developments that have appeared over the last decade or so regarding the use of additive manufacturing (AM) methods in the production of neat and reinforced polymeric components. A major focus is given to materials science aspects, i.e., how the quality of the polymer preforms, the parameters of the chosen AM method, and how these factors can affect the microstructure and properties of the final product. The book not only covers production technologies and the relationship between processing, microstructure and fundamental properties of the produced parts, but also gives readers ideas on the use of AM polymer parts in medicine, automotive, aerospace, tribology, electronics, and more. - Focuses on industrial aspects and applications - Dedicated purely to recent advances in polymer composite additive manufacturing - Emphasizes processing, structure and property relationships
Plastics Additives
Author: G. Pritchard
Publisher: Springer Science & Business Media
Published: 2012-12-06
Total Pages: 650
ISBN-13: 9401158622
DOWNLOAD EBOOKAlthough plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.
Compositional and Failure Analysis of Polymers
Author: John Scheirs
Publisher: John Wiley & Sons
Published: 2000-10-03
Total Pages: 812
ISBN-13: 9780471625728
DOWNLOAD EBOOKEin Praxisleitfaden der Polymeranalyse für alle, die sich in Polymerlabors mit Analytik, Qualitätskontrolle oder Produktentwicklung beschäftigen. Der Autor erläutert, aus seinem umfangreichen Erfahrungsschatz, welche Probleme in welchen Situationen auftreten können. Viele Fallstudien helfen bei der Anwendung der Erkenntnisse im Laboralltag. Mit einer umfangreichen Datensammlung zu physikalischen Eigenschaften von Polymeren! (07/00)
