Plastics Injection Molding
Plastics Injection Molding

Author: José R. Lerma Valero

Publisher:

Published: 2019-12-09

Total Pages: 350

ISBN-13: 9781569906897

DOWNLOAD EBOOK

Plastics Injection Molding: Scientific Molding, Recommendations, and Best Practices is a user-friendly reference book and training tool, with all the essentials to understand injection molding of plastics. It is a practical guide to refining and controlling the process, increasing robustness and consistency, increasing productivity and profitability, and reducing costs. This book contains structured information on process definitions and parameters, optimization methods, key points, interpretation of data sheets, among other useful recommendations regarding both technology and design. It also provides analysis of process deviation, defects, incidents, etc. as well as a section dedicated to material selection and comparison. It includes a bonus of downloadable Excel spreadsheets for application to scientific molding, process analysis, and optimization. This book is aimed at injection molding technicians, process engineers, quality engineers, mold designers, part designers, simulation engineers, team leaders, plant managers, and those responsible for purchasing plastic materials.

Plastic Part Design for Injection Molding
Plastic Part Design for Injection Molding

Author: Robert A. Malloy

Publisher:

Published: 2011

Total Pages: 549

ISBN-13: 9783446404687

DOWNLOAD EBOOK

The goal of the book is to assist the designer in the development of parts that are functional, reliable, manufacturable, and aesthetically pleasing. Since injection molding is the most widely used manufacturing process for the production of plastic parts, a full understanding of the integrated design process presented is essential to achieving economic and functional design goals. Features over 425 drawings and photographs.

Practical Injection Molding
Practical Injection Molding

Author: Bernie A. Olmsted

Publisher: CRC Press

Published: 2001-03-14

Total Pages: 236

ISBN-13: 1482294591

DOWNLOAD EBOOK

This work focuses on the factors critical to successful injection moulding, including knowledge of plastic materials and how they melt, the importance of mould design, the role of the screw, and the correct use of the controls of an injection moulding machine. It seeks to provide operating personnel with a clear understanding of the basics of injec

Plastic Injection Molding: Manufacturing Startup and Management
Plastic Injection Molding: Manufacturing Startup and Management

Author: Douglas M. Bryce

Publisher: Society of Manufacturing Engineers

Published: 1999

Total Pages: 226

ISBN-13: 0872635031

DOWNLOAD EBOOK

This book in the Plastics Injection Molding series addresses the many facets of running a molding company including selecting the right equipment, identifying costs to determine price, making the most of available resources (including personnel), and complying with industry and quality standards. Also discussed are key company strategies that can determine whether a company operates in the red or is profitable. This book also includes a benchmarking feature that allows decision-makers to gauge their company's competitiveness in comparison to the top 50 molders in the United States.

The Secrets of Building a Plastic Injection Molding Machine
The Secrets of Building a Plastic Injection Molding Machine

Author: Vincent R. Gingery

Publisher: David J. Gingery Publishing, LLC

Published: 2015-11-30

Total Pages: 107

ISBN-13: 1878087525

DOWNLOAD EBOOK

Here is a book that brings the art of plastic injection molding to the home shop level. Working with plastics can be a fun and profitable hobby. If you have ever wanted to produce custom made plastic parts or just want to know how it’s done then this book is for you. Included are complete step by step instructions on how to build a small inexpensive table top injection molding machine capable of injecting up to 1/2 ounce of plastic into a mold. Sources for plastic will be those things normally thrown away. Stuff like plastic milk jugs, soda pop bottles, plastic oil cans etc. You will learn the basic principles of injection molding and how to design and make your own molds. Begin by making a simple mold to test the machine. Then a mold for a plastic knob that will be used on the machine. Progress to a mold for a small plastic container with a snap lid. It won’t be long before you will be creating new products of your own design. I’ll even show you how to cast replacements for broken or missing plastic parts. Just think of the possibilities. And the finished items you make will turn out so nice and look so professional that it will be hard to believe you made them yourself. Construction is simple and straight forward, but it will require basic metal working knowledge and access to a metal lathe and a drill press along with other hand and power tools associated with metal working and machine work in general.

Specialized Injection Molding Techniques
Specialized Injection Molding Techniques

Author: Hans-Peter Heim

Publisher: William Andrew

Published: 2015-11-02

Total Pages: 263

ISBN-13: 0323371213

DOWNLOAD EBOOK

Special Injection Molding Techniques covers several techniques used to create multicomponent products, hollow areas, and hard-soft combinations that cannot be produced with standard injection molding processes. It also includes information on the processing techniques of special materials, including foaming agents, bio-based materials, and thermosets. The book describes the most industrially relevant special injection molding techniques, with a detailed focus on understanding the basics of each technique and its main mechanisms, i.e., temperature, mold filling, bonding, residual stresses, and material behavior, also providing an explanation of process routes and their variants, and discussions of the most influencing process parameters. As special molding technologies have the potential to transform plastics processing to a highly-efficient, integrated type of manufacturing, this book provides a timely survey of these technologies, putting them into context, accentuating new opportunities, and giving relevant information on processing. Provides information about the basics needed for understanding several special injection molding techniques, including flow phenomena, bonding mechanisms, and thermal behavior Covers the basics of each technique and its main mechanisms, i.e., temperature, mold filling, bonding, residual stresses, and material behavior Discusses the most relevant processing parameters for each injection molding technique Presents a variety of techniques, including gas and water assisted injection molding, multi component injection molding, hybrid injection molding, injection molding of bio-based materials, and techniques for thermoset

Plastic Injection Molding
Plastic Injection Molding

Author: Douglas M. Bryce

Publisher: Sme

Published: 1997

Total Pages: 380

ISBN-13: 9780872634886

DOWNLOAD EBOOK

The second book in the Plastic Injection Molding series addresses the basics and the fine points of plastics materials and product design phases of the thermoplastic injection molding process. Complex technical matter is presented in clear, sequential narrative bites.

Computer Modeling for Injection Molding
Computer Modeling for Injection Molding

Author: Huamin Zhou

Publisher: John Wiley & Sons

Published: 2013-03-04

Total Pages: 40

ISBN-13: 0470602996

DOWNLOAD EBOOK

This book covers a wide range of applications and uses of simulation and modeling techniques in polymer injection molding, filling a noticeable gap in the literature of design, manufacturing, and the use of plastics injection molding. The authors help readers solve problems in the advanced control, simulation, monitoring, and optimization of injection molding processes. The book provides a tool for researchers and engineers to calculate the mold filling, optimization of processing control, and quality estimation before prototype molding.

Practical Guide To Injection Blow Molding
Practical Guide To Injection Blow Molding

Author: Samuel L. Belcher

Publisher: CRC Press

Published: 2007-03-05

Total Pages: 182

ISBN-13: 1420014811

DOWNLOAD EBOOK

Taking a straight-forward approach, the Practical Guide to Injection Blow Molding explores the entire industry from conception, design, costing, tooling, and machinery, to trouble-shooting, testing, and daily production. With information for both the novice investor and the plastic industry expert, this concise text is reinforced with pictures, charts, and figures. The author, a highly knowledgeable industry insider, and a member ofThe Plastics Hall of Fame, discusses the history of the industry, as well as its daily workings. He instructs in product and tooling design, as well as material and machine selection, explaining advantages and disadvantages, elaborating on efficiencies that can be realized.

Injection Molding Handbook
Injection Molding Handbook

Author: D.V. Rosato

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 1484

ISBN-13: 1461545978

DOWNLOAD EBOOK

This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more basic information has been added concerning present and future developments, resulting in the book being more useful for a long time to come. Detailed explanations and interpretation of individual subjects (more than 1500) are provided, using a total of 914 figures and 209 tables. Throughout the book there is extensive information on problems and solutions as well as extensive cross referencing on its many different subjects. This book represents the ENCYCLOPEDIA on IM, as is evident from its extensive and detailed text that follows from its lengthy Table of CONTENTS and INDEX with over 5200 entries. The worldwide industry encompasses many hundreds of useful plastic-related computer programs. This book lists these programs (ranging from operational training to product design to molding to marketing) and explains them briefly, but no program or series of programs can provide the details obtained and the extent of information contained in this single sourcebook.