This book quickly gets down to the issues that many people grapple with when trying to use some of the more advanced features of the software and enlightens readers on the traps that some users fall into and how to avoid them. It demonstrates how the software ticks and explains some tricks that may be used to become more productive with the software and generate better schedules. Suitable for people who understand the basics of Microsoft Project but want a short guide to give them insight into the less intuitive features of the software. It is packed with screen shots, constructive tips and is written in plain English. The book is based on the Microsoft Project 2013, 2016 and 2019 but may be used with earlier versions of Microsoft Project as this book points out the differences where appropriate. The book picks out many of the key aspects from the author’s exiting books and adds a substantial amount of new and original text to produce a pocket guide that omits describing the intuitive and obvious functions and concentrates on the issues that many users get stuck on or find hard to understand.
This book is written in simple, easy to understand format with lots of screenshots and step-by-step explanations. If you are a Project manager or a consultant, who wants to master the core concepts of Primavera P6 and the new features associated with version 8, then this is the best guide for you. This book assumes that you have a fundamental knowledge of working in the Primavera P6 environment.
All scheduling software is difficult to learn for a number of reasons. None have the optimal settings when installed and Layouts, User Preferences and default options need to be adjusted to obtain the best possible performance. Usually the Help files do not connect the user to real life situations and do not explain the practical use of functions. Furthermore, there are many flicks and switches with obscure names that are difficult to understand or decide what they do or which are important. These issues make learning the software very difficult without a comprehensive guide written by an experienced user. Investing in a book written by Paul E Harris will address all these issues and allow you to setup the software properly and understand all the obscure functions letting you become productive more quickly and enhance your career opportunities and salary with a solid understanding of the software. This book is an update of the author’s Primavera P6 Version 8 to 19 book and contains a new section on Visualizer. The workshops have been updated so they start in the future. The book has been written so it may be used with any software industry version. The book is packed with screen shots, constructive tips and contains workshops with solutions at the end of each chapter for the reader to practice the skills taught. It has been written so it may be used with either the Professional Project Management Client version or the Enterprise Project Portfolio Management Optional Client. The book is aimed at: 1. People who wish learn the software but are unable to attend a training course and find the software reference manual hard going. 2. Project management companies who wish to run their own software training courses or provide their employees with an alternative text to the vendor supplied user manual. 3. Training organizations requiring a training manual to run their own training courses. The book is designed to teach planners and schedulers in any industry how to setup and use the software in a project environment. It explains in plain English and in a logical sequence, the steps required to create and maintain an unresourced and resourced schedule. It tackles some of the more complex aspects of the software that the user manual does not address. It highlights the sources of information and the methods that should be employed to produce a realistic and useful project schedule. The book provides advice on how on how the many software options may be applied to projects environments and it aims to teach readers how to plan and control projects created within the software package and stays focused on explaining how to use Primavera to schedule projects by: Concentrating on the core functions required to set up an enterprise environment and how to plan and control projects. Providing command lists at the start of each chapter as a quick reference. Providing a comprehensive table of contents and index of all topics. The book is intended to be used: As a self-teach book, or A user guide, or A training manual for a three-day training course. This book is written by an experienced scheduler, who has used the software at the sharp end of projects and is not a techo. It draws on the author's practical experience in using the software in a wide variety of industries. It presents workable solutions to real day to day planning and scheduling problems and contains practical advice on how to set up the software and import data.
Offers an understanding of construction project management by providing various concepts, practical insights, real life examples and skills to execute large and small projects. This book dwells at length on planning, a topic of concern to project managers. It also includes many examples, problems, exhibits and data to demystify the subject.
This book is a user guide and training manual written for Project Management Professionals who wish to learn how to set up a database and plan and control projects using Primavera P6 with or without Resources and Roles. The book is aimed at: 1. Project management companies who wish to run their own software training courses or provide their employees with an alternative text to the vendor supplied user manual. This book may be customized to meet your requirements, please contact the author for details. This book is a PMI Approved course. REPs may apply to have this course licensed to them. 2. Training organizations requiring a training manual to run their own training courses. 3. People who wish learn the software but are unable to attend a training course but find the software reference manual hard going. This book is an update of the authors Primavera Version 6.2 book and contains more chapters including Global Change, Multiple Project Scheduling, Managing the Enterprise Environment, Resource Optimization and Leveling. It has been written using the Construction and Engineering version but may be used by any industry and covers Versions 4 to 7. The book is packed with screen shots, constructive tips and contains workshops with solutions at the end of each chapter for the reader to practice the skills taught.
This book focuses on the impacts of the built environment, and how to predict and measure the benefits and consequences of changes taking place to address sustainability in the development and building industries. It draws together the best treatments of these subjects from the Leeds Sustainability Institute’s inaugural International Conference on Sustainability, Ecology, Engineering, Design for Society (SEEDS). The focus of discussion is on understanding how buildings and spaces are designed and nurtured to obtain optimal outcomes in energy efficiency and environmental impacts. In addition to examining technical issues such as modeling energy performance, emphasis is placed on the health and well-being of occupants. This holistic approach addresses the interdependence of people with the built and natural environments. The book’s contents reflect the interdisciplinary and international collaboration critical to assembly of the knowledge required for positive change.
A user guide, reference book and two-day training course written for Project Management Professionals who wish to learn how to plan and control both an unresourced and resourced project in an established Oracle Primavera environment. This book is an update of the author's unpublished book titled Planning and Control Using Primavera P6.1 Web and includes the new features of Oracle Primavera P6 Version 8.2 Web. The book is packed with screen shots, constructive tips and contains workshops with solutions at the end of each chapter for the reader to practice the skills taught. It has been written so it may be used with the EPPM Web tool. The book is aimed at: People who wish learn the software but are unable to attend a training course and find the software reference manual hard going. Project management companies who wish to run their own software training courses or provide their employees with an alternative text to the vendor supplied user manual. Training organizations requiring a training manual to run their own training courses. This book is a PMI Approved course and instructors PowerPoint slide shows are available to training organizations. PMI REPs may apply to have this course licensed to them and award 21 PDUs to each attendee. Primavera Systems Inc. originally asked the author to write this book and this publication is ideal for people who would like to gain an understanding of how the software operates up to an intermediate level. It only covers the Primavera Versions 8.2 Web tool. It explains some of the differences from the Professional tool, SureTrak, P3, Microsoft Project and Asta Powerproject to assist people converting form other products. The book is designed to teach planners and schedulers in any industry how to setup and use the software in a project environment. It explains in plain English and in a logical sequence, the steps required to create and maintain an unresourced and resourced schedule. It tackles some of the more complex aspects of the software that the user manual does not address. It highlights the sources of information and the methods that should be employed to produce a realistic and useful project schedule. The book provides advice on how on how the many software options may be applied to projects environments and it aims to teach readers how to plan and control projects created within the software package and stays focused on explaining how to use Primavera to schedule projects by: Concentrating on the core functions required to set up an enterprise environment and how to plan and control projects. Providing command lists at the start of each chapter as a quick reference. Providing a comprehensive table of contents and index of all topics. The book is intended to be used: As a self teach book, or A user guide, or A training manual for a two day training course. This book is written by an experienced scheduler, who has used the software at the sharp end of projects and is not a techo. It draws on the author's practical experience in using the software in a wide variety of industries. It presents workable solutions to real day to day planning and scheduling problems and contains practical advice on how to set up the software and import data. About the Author: Paul Harris holds an Honours Degree in Civil Engineering obtained in the UK and is a Certified Cost Engineer through AACEI International, a PRINCE2 Registered Practitioner, an Approved PRINCE2 Trainer and a "Managing Successful Programmes" Registered Practitioner. He has worked in the project controls industry for a number of years and has assisted many companies in a range of industries to set up and run project controls systems. His Melbourne, Australia based company, Eastwood Harris Pty Ltd, offers project controls consulting and training services worldwide with a strong focus on Microsoft Project and Primavera software.
A user guide, reference book and two-day training course written for Project Management Professionals who wish to learn how to plan and control both an unresourced and resourced project in an established Oracle Primavera "Enterprise Project Portfolio Management" environment.This book is an update of the author's Planning and Control Using Primavera P6 Version 8.4 EPPM Web and includes the new features of Oracle Primavera P6 Versions 8.2 to 15.1 Web. The book is packed with screen shots, constructive tips and contains workshops with solutions at the end of each chapter for the reader to practice the skills taught. It has been written so it may be used with the EPPM Web tool.
The book is packed with screen shots, constructive tips and contains workshops with solutions at the end of each chapter for the reader to practice the skills taught. It has been written so it may be used with either the Professional Project Management Client version or the Enterprise Project Portfolio Management Optional Client.
A user guide (written in Chinese) and training manual written for Project Management Professionals who wish to learn how to plan and control projects in an established Primavera Enterprise environment with or without Resources and Roles. This book is an update of the author's Primavera P6 Version 7 book and contains updated workshops, new content and an Earned Value chapter. It has been written so it may be used with any software industry version. The book is packed with screen shots, constructive tips and contains workshops with solutions at the end of each chapter for the reader to practice the skills taught. It has been written so it may be used with either the Professional Project Management Client version or the Enterprise Project Portfolio Management Optional Client. The book is aimed at: People who wish learn the software but are unable to attend a training course and find the software reference manual hard going. Project management companies who wish to run their own software training courses or provide their employees with an alternative text to the vendor supplied user manual. Training organizations requiring a training manual to run their own training courses. This book is a PMI Approved course and instructors PowerPoint slide shows are available to training organizations. PMI REPs may apply to have this course licensed to them and award 21 PDUs to each attendee. Primavera Systems Inc. originally asked the author to write this book and this publication is ideal for people who would like to gain an understanding of how the software operates up to an intermediate level. It covers only Primavera Versions 8.1, to 15.1 Professional Client and Optional Client. It explains some of the differences from SureTrak, P3, Microsoft Project and Asta Powerproject to assist people converting form other products. The book is designed to teach planners and schedulers in any industry how to setup and use the software in a project environment. It explains in plain English and in a logical sequence, the steps required to create and maintain an unresourced and resourced schedule. It tackles some of the more complex aspects of the software that the user manual does not address. It highlights the sources of information and the methods that should be employed to produce a realistic and useful project schedule. This book is written by an experienced scheduler, who has used the software at the sharp end of projects and is not a techo. It draws on the author's practical experience in using the software in a wide variety of industries. It presents workable solutions to real day to day planning and scheduling problems and contains practical advice on how to set up the software and import data. About the Author: Paul Harris holds an Honours Degree in Civil Engineering obtained in the UK and is a Certified Cost Engineer through AACEI International, a PRINCE2 Registered Practitioner and a "Managing Successful Programmes" Registered Practitioner. He has worked in the project controls industry for a number of years and has assisted many companies in a range of industries to set up and run project controls systems. His Melbourne, Australia based company, Eastwood Harris Pty Ltd, offers project controls consulting and training services worldwide with a strong focus on Microsoft Project and Primavera software."
